Ctek MXS 15 Acculader Manual

Ctek Batterioplader MXS 15 Acculader

Læs gratis den danske manual til Ctek MXS 15 Acculader (6 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Ctek MXS 15 Acculader, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
EN
EN • 3
SUPPLYNORMAL RECOND
RECOND
SUPPLY
MODE
12V/15A
MXS 15
SUPPLYNORMAL RECOND
RECOND
SUPPLY
MODE
12V/25A
MXS 25
ABSORPTION, READY TO USE
ANALYSE
SUPPLY PLUG*
L: 2000 mm
NORMAL
BATTERY
PROGRAM
ERROR LAMP
RECOND
PROGRAM
SUPPLY
PROGRAM
POWER
LAMP
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when is lit.
The battery is fully charged when is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
MODE-
BUTTON
MANUAL
DESULPHATION
SOFT START
BULK FLOAT, FULLY CHARGED
PULSE, MAINTENANCE CHARGING
TEMPERATURE
SENSOR
INDICATOR
TEMPERATURE
SENSOR
CONGRATULATIONS
to the purchase of your new professional switch mode battery
charger. This charger is included in a series of professional
chargers from CTEK SWEDEN AB and represents the latest
technology in battery charging.
MAINS CABLE
*Supply plugs may differ to suit your wall socket.
20016019B MXS 15, Manual AUS, Print file 002.indd 3 2011-10-27 10:27:07
4 • EN
BATTERY SIZE (Ah) TIME TO 80% CHARGED
40Ah 2h
100Ah 5h
200Ah 10h
300Ah 16h
READY TO USE
The table shows the estimated time for empty battery to 80% charge
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about two seconds the charger
activates the selected program. The selected program will be restarted next time the
charger is connected.
The table explains the different Charging Programs:
Program Battery
Size (Ah) Explanation Temp range
NORMAL 30–500Ah
Normal battery program
14.4V/15A. Use for WET batteries,
Ca/Ca, MF and for most GEL batteries
-20°C–+50°C
(-4ºF–122ºF)
RECOND 30–500Ah
Recond program 15.8V/3A
Use to return energy to the empty
WET and Ca/Ca batteries. Recond
your battery once per year and after
deep dischare to maximise lifetime and
capacity. The Recond program adds the
Recond step to the normal battery
program. Frequent use of the Recond
program may cause water loss in the
batteries and reduce service life of
electronics. Contact your vehicle and
battery supplier for advice.
-20°C–+50°C
(-4ºF–122ºF)
30–500Ah
Supply program 13.6V/15A
Use as 12V power supply or use for
float maintenance charging when 100%
capacity of the battery is required.
Supply program activates Float step
without time or voltage limitation.
-20°C–+50°C
(-4ºF–122ºF)
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead connected to the batterys
positive pole?
2. Is the charger connected to a 12V battery?
3. Has charging been interrupted in or ?
Restart the charger by pressing the MODE-button. If charging is still
being interrupted, the battery...
...is seriosly sulphated and may need to be replaced.
...can not accept charge and may need to be replaced.
...can not keep charge and may need to be replaced.
WARNING!
The spark protection on the battery charger
is disabled during SUPPLY program.
TEMPERATURE SENSOR
The MXS 15 is equipped with an external temperature sensor. Activated
temperature sensor will be indicated by a lit temperature sensor indicator
lamp. The temperature sensor will adjust the voltage to the ambient tempera-
ture. Place the temperature sensor in the positive clamp or as the close to the
battery as possible.
POWER LAMP
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT:
The charger has entered the energy save mode. This happens if the
charger isn´t connected to the battery in 2 minutes.
SUPPLYNORMAL RECOND
RECOND
SUPPLY
MODE
12V/25A
MXS 25
SUPPLYNORMAL RECOND
RECOND
SUPPLY
MODE
12V/25A
MXS 25
SUPPLYNORMAL RECOND
RECOND
SUPPLY
MODE
12V/25A
MXS 25
20016019B MXS 15, Manual AUS, Print file 002.indd 4 2011-10-27 10:27:08

Produkt Specifikationer

Mærke: Ctek
Kategori: Batterioplader
Model: MXS 15 Acculader

Har du brug for hjælp?

Hvis du har brug for hjælp til Ctek MXS 15 Acculader stil et spørgsmål nedenfor, og andre brugere vil svare dig


Batterioplader Ctek Manualer

Ctek

Ctek READY AUTOMOTIVE Manual

2 September 2024
Ctek

Ctek MXS 5.0 CHECK Acculader Manual

23 August 2024
Ctek

Ctek MXS 5.0 POLAR Acculader Manual

23 August 2024
Ctek

Ctek MXS 5.0 Test and Charge Acculader Manual

23 August 2024
Ctek

Ctek PRO25SE Acculader Manual

22 August 2024
Ctek

Ctek MXTS70 Acculader Manual

22 August 2024
Ctek

Ctek MXT 14 Acculader Manual

22 August 2024
Ctek

Ctek MXS 3.8 Acculader Manual

22 August 2024
Ctek

Ctek Njord Go Acculader Manual

22 August 2024
Ctek

Ctek D250TS Acculader Manual

22 August 2024

Batterioplader Manualer

Nyeste Batterioplader Manualer

Graphite

Graphite 58G002-1 Manual

14 Juni 2025
Champion

Champion 100594 Manual

14 Juni 2025
Schwaiger

Schwaiger LPBC0500 Manual

14 Juni 2025
Champion

Champion 100593 Manual

14 Juni 2025
Graphite

Graphite 58G085-1 Manual

13 Juni 2025
Venom

Venom VS2872 Manual

9 Juni 2025
Stalco

Stalco Perfect BCP60-8ACS Manual

9 Juni 2025
Stalco

Stalco Perfect BCP60-5.5A Manual

8 Juni 2025
Xline

Xline CC702 Manual

8 Juni 2025
Draper

Draper D20 92239 Manual

8 Juni 2025