Ctek MXS 3.8 Manual

Ctek Biloplader MXS 3.8

Læs gratis den danske manual til Ctek MXS 3.8 (6 sider) i kategorien Biloplader. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Ctek MXS 3.8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

EN • 3

CONGRATULATIONS

on the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

CTEK COMFORT CONNECT eyelet M6–

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT clamp–

CHARGE CABLE

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

SMALL

BATTERY

PROGRAM

ERROR LAMP

NORMAL

BATTERY

PROGRAM

FULLY CHARGEDREADY TO USE

COLD

WEATHER

PROGRAM

POWER LAMP

HOW TO CHARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3.Press the MODE-button to select charging program.

4. Follow the 7-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 6 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE BUTTON

MANUAL

MODE

4 • EN

BATTERY SIZE (Ah) TIME TO 80% CHARGED

2Ah 2h

8Ah 8h

20Ah 5h

60Ah 15h

80Ah 20h

READY TO USE

The table shows the estimated time for empty battery to 80% charge

CHARGING PROGRAMS

Settings are made by pressing the MODE-button. After about two seconds the charger

activates the selected program. The selected program will be restarted next time the

charger is connected.

The table explains the diﬀerent Charging Programs:

Program Battery

Size (Ah) Explanation Temp range

1.2–14Ah

Small battery program

14.4V/0.8A

Use for smaller batteries.

-20°C–+50°C

(-4ºF–122ºF)

14–130Ah

Normal battery program

14.4V/3.8A

Use for WET batteries, Ca/Ca,

MF, GEL batteries and many

AGM batteries.

+5°C–+50°C

(41ºF–122ºF)

14–130Ah

Cold weather program

14.7V/3.8A

Use for charging at low tempera-

tures and for power AGM batter-

ies like Optima and Odyssey.

-20°C–+5°C

(-4ºF–41ºF)

ERROR LAMP

If the error lamp is lit, check the following:

1. Is the chargers positive lead connected to the battery´s

positive pole?

2. Is the charger connected to a 12V battery?

3. Has charging been interrupted in STEP 1, 2 or 5?

Restart the charger by pressing the MODE-button. If charging is still

being interrupted, the battery...

STEP 1: ...is seriously sulphated and may need to be replaced.

STEP 2: ...can not accept charge and may need to be replaced.

STEP 5: ...can not keep charge and may need to be replaced.

POWER LAMP

If the power lamp is lit with a:

1. STEADY LIGHT

The mains cable is connected to the wall socket.

2. FLASHING LIGHT:

The charger has entered the energy save mode. This happens if the

charger isn´t connected to the battery in 2 minutes.

Produkt Specifikationer

Mærke:	Ctek
Kategori:	Biloplader
Model:	MXS 3.8
Kode for international beskyttelse (IP):	IP65
Bredde:	168 mm
Dybde:	65 mm
Højde:	38 mm
Vægt:	600 g
Produktfarve:	Sort, sølv
Indbygget skærm:	Ingen
Strøm:	3.8 A
LED-indikatorer:	Ja
Ladespænding:	6/12 V
Batterikapacitet (min.):	1.2 At
Batterikapacitet (maks.):	80 At