Ctek XC 0.8 Manual


Læs gratis den danske manual til Ctek XC 0.8 (5 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Ctek XC 0.8, eller vil du spørge andre brugere om produktet?

Side 1/5
EN
EN • 3
X
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The error lamp will indicate if the battery
clamps are incorrectly connected. The reverse polarity protection will ensure that the
battery or charger will not be damaged.
3.Follow the indication lamps through the charging process.
The battery is fully charged when is lit.
4. Stop charging at any time by disconnecting the mains cable from the wall socket.
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
CTEK COMFORT CONNECTeyelet M6
6V/0.8A
XC 0.8
CTEK COMFORT CONNECT
MAINS CABLE
DESULPHATION
BULK
ABSORPTION
FULLY CHARGED
PULSE, MAINTENANCE CHARGING
CTEK COMFORT CONNECTclamp
CHARGE CABLE
SUPPLY PLUG*
*Supply plugs may differ to suit your wall socket.
MANUAL
ERROR LAMP
4 • EN
BATTERY SIZE (Ah) TIME TO 80% CHARGED
2Ah 2h
8Ah 8h
20Ah 20h
60Ah 60h
READY TO USE
The table shows the estimated time for empty battery to 80% charge
ERROR LAMP
If the error lamp is lit, check the following:
Is the chargers positive lead connected to the
batterys positive pole?
— Connect the charger according to page 6.
TECHNICAL SPECIFICATIONS
Charger model XC 0.8
Model number 1054
Rated Voltage AC 220240VAC, 50–60Hz
Charging voltage 7.2V
Start voltage 3.7V
Charging current 0.8A max
Current, mains 0.2A rms (at full charging current)
Back current drain* <1Ah/month
Ripple** <4%
Ambient
temperature
-20°C to +5C, output power is reduced
automatically at high temperatures
Charger type 4-step, fully automatic charging cycle
Battery types All types of 6V lead-acid batteries
(WET, MF, Ca/Ca, AGM and GEL)
Battery capacity 1.2100Ah
Dimensions 142x51x36mm(LxWxH)
Insulation class IP65
Weight 0.3kg
*) Back current drain is the current that drains the battery if the charger is not connected
to the mains. CTEK chargers has a very low back current.
**) The quality of the charging voltage and charging current is very important. A high
current ripple heats up the battery which has an aging effect on the positive electrode.
High voltage ripple could harm other equipment that is connected to the battery. CTEK
battery chargers produce very clean voltage and current with low ripple.
FULLY CHARGED


Produkt Specifikationer

Mærke: Ctek
Kategori: Batterioplader
Model: XC 0.8

Har du brug for hjælp?

Hvis du har brug for hjælp til Ctek XC 0.8 stil et spørgsmål nedenfor, og andre brugere vil svare dig