CyberPower BU1000ELCD Manual

CyberPower UPS BU1000ELCD

Læs gratis den danske manual til CyberPower BU1000ELCD (2 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om CyberPower BU1000ELCD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

User’s Manual

BU600ELCD

BU LCD800E

BU LCD1000E

K01 C000492 00- -

IMPORTANT INSTRUCTIONSSAFETY

(SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully during

installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or

operate your UPS.

CAUTION! To prevent the risk of fire or electric shock, install in a temperatur and humiditye controlled indoor

area free of conductive contaminants. (See the specifications for the acceptable temperature and humidity

range.)

CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and avoid exposing

the unit to direct sunlight or installing the unit near appliances such as space heaters or furnaces.heat emitting

CAUTION! - - -Do not attach non computer related items, such as medical equipment, life support equipment,

microwave ovens, or vacuum cleaners to UPS.

CAUTION! Do not plug the UPS input into its own output.

CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages or any other

liquid- containing vessels on or near the unit.

CAUTION! In the event of an emergency, press the OFF button and disconnect the power cord from the AC

power supply to properly disable the UPS.

CAUTION! Do not attach a power strip or surge suppressor to the UPS.

CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.

CAUTION! Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries

and the required precautions. Keep unauthorized personnel away from batteries.

CAUTION! The battery supply should be therefore disconnected in the plus minus poleand at the quick

connectors of the battery when maintenance or service work inside the UPS is necessary.

CAUTION! - -Internal battery voltage is 12Vdc. Sealed, lead acid, 6 cell battery.

CAUTION! When replacing the batteries, use the same number and type of batteries.

CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or mutilate the battery or

batteries. Released electrolyte is harmful to the skin and eyes.

INSTALLING YOUR UPS SYSTEM

UNPACKING

The box should contain the User Manualfollowing :(1)UPS Unitx1 2); ( x1

OVERVIEW

The BU provides automatic voltage regulation for inconsistent utility power, and provides 600/80 /1000E0 LCD

battery backup during power outages. consistent power to your computer The 600/80 /1000E ensures BU 0 LCD

system.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately upon receipt. However, recharging the battery for at least 8 hours

is recommended to ensure that the battery's maximum charge capacity is achieved. Charge loss may occur

during shipping and storage. To recharge the battery, simply leave the unit plugged into an AC outlet. The

unit will charge in both the on and off position.

2. With the UPS unit off and unplugged, connect the computer, monitor, and any externally powered data

storage device (Zip drive, Jazz drive, Tape drive, etc. into the battery power supplied outlets. ) DO NOT

plug a laser printer, copier, space heater, vacuum, paper shredder or other large electrical device

into the battery power supplied outlets. The power demands of these devices will overload and

possibly damage the unit.

3. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet is

protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. air

conditioner, refrigerator, copier, etc . Avoid using extension cords.)

4. Press the power switch to turn the unit on. The power on indicator light will illuminate and the unit will

"beep".

5. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To correct this,

turn the UPS off and unplug at least one piece of equipment from the battery power supplied outlets. Wait

10 seconds. Make sure the circuit breaker / fuse and then turn the UPS on. is normal s

6. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.

7. To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the

battery every three months to ensure battery life.

BASIC OPERATION

1. Power Switch

Press the switch for 2 seconds to turn the UPS ON or OFF.

Alarm setting: The audible alarm can be turned OFF or ON by quickly pressing the POWER button

twice. The default setting is for the Alarm On. To turn the Alarm Off, quickly press the power button

twice. You will hear two short beeps when the Alarm is turned off. To turn the Alarm back on, quickly

press the power button twice. You will hear a single short beep when the Alarm is turned on.

2. Led Indicators

LED is illuminated when the UPS . is working

3. Input Power Cord Connect to utility power.

4. Input Circuit Breaker(BU1000ELCD only)

T he circuit breaker provides optimal overload protection.

5. LCD Display

High resolution and intelligent LCD display shows all the UPS icons and messages. For information with

more information please review the “Definitions for Illuminated LCD Indicators” section.

6. AC outlet

The UPS provides outlets for connected equipment to insure temporary uninterrupted operation during a

power failure and against surges and spikes.

DEFINITIONS FOR ILLUMINATED LED INDICATORS

LED

Alarm

Condition

On Off Normal

Flash Beep Twice Utility Failure - The UPS is providing battery power to outlets.

Flash Rapid

Beeping

Utility Failure - The UPS is providing battery power. The rapid beeps indicate

the battery will run out of power shortly.

On/Flash Constant

Tone

Overload - Occurs when connected equipment exceeds the rating of the unit.

Turn the UPS off and unplug at least one piece of equipment from the UPS.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	UPS
Model:	BU1000ELCD

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower BU1000ELCD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

UPS CyberPower Manualer

CyberPower Smart App Sinewave PR2000RT2U Manual

30 December 2025

CyberPower Smart App Sinewave PR2000RTXL2UTAA Manual

8 December 2024

CyberPower CP425G Manual

2 Oktober 2024

CyberPower SM180KMFX Manual

24 September 2024

CyberPower RT33030KE Manual

24 September 2024

CyberPower SM300KMFX Manual

24 September 2024

CyberPower OLS3S20KEXL Manual

24 September 2024

CyberPower Value800EILCD Manual

24 September 2024

CyberPower Value1000EILCD Manual

24 September 2024

CyberPower UT1050EI Manual

24 September 2024

UPS Manualer

Nyeste UPS Manualer

APC RBC150 Manual

2 April 2025

APC RBC151 Manual

2 April 2025

APC Symmetra LX 4kVA Manual

30 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Teltonika BAT120 Manual

30 Januar 2025

APC BX1000M Manual

30 Januar 2025

APC BX850 Manual

30 Januar 2025