CyberPower OLS6000ECXL Manual

CyberPower UPS OLS6000ECXL

Læs gratis den danske manual til CyberPower OLS6000ECXL (24 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om CyberPower OLS6000ECXL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Userˊ

ˊˊs Manual

OLS6000EC(XL)

OLS10200 (XL) EC

CyberPower Systems Inc.

www.cyberpower.com

K01-C000829-00

1. Safety

Please read carefully the following user manual and the safety instructions

before installing the unit or using the unit!

1.1. Installation

 This is permanently connected equipment, and it must be installed by qualified

maintenance personnel.

 Condensation may occur if the UPS is moved directly from a cold to a warm

environment. The UPS must be absolutely dry before being installed. Please

allow an acclimatization time of at least two hours.

 Do not install the UPS near water or in damp environment.

 Do not install the UPS where it would be exposed to direct sunlight or near heat.

 Do not connect appliances or items of equipment which would overload the UPS

(e.g. laser printers, etc.) to the UPS output.

 Do not block ventilation openings in the UPS’s housing. Ensure allow at least

0.5m of space on front and rear of the UPS.

 Place cables in such a way that no one can step on or trip over them.

 Connect UPS with the earth reliably before connecting to the building wiring

terminal, and external battery source must also be earthed.

 An integral single emergency switching device which prevents further supply to

the load by the UPS in any mode of operation should be provided in the building

wiring installation.

 An appropriate disconnect device as short-circuit backup protection should be

provided in the building wiring installation.

 The equipment is powered by two sources: the mains source, the internal

battery or the external battery source.

 With the installation of the equipment, the sum of the leakage current of the UPS

and the connected load does not exceed 5% of rated value of input current.

1.2. Operation

 Do not disconnect the main cable on the UPS or the building wiring terminals

during operation since this would remove the protective earth from the UPS and

all connected loads.

 The UPS output terminal block may still be electrically lived even if the UPS is

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	UPS
Model:	OLS6000ECXL

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower OLS6000ECXL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

UPS CyberPower Manualer

CyberPower Smart App Sinewave PR2000RT2U Manual

30 December 2025

CyberPower Smart App Sinewave PR2000RTXL2UTAA Manual

8 December 2024

CyberPower CP425G Manual

2 Oktober 2024

CyberPower SM180KMFX Manual

24 September 2024

CyberPower RT33030KE Manual

24 September 2024

CyberPower SM300KMFX Manual

24 September 2024

CyberPower OLS3S20KEXL Manual

24 September 2024

CyberPower Value800EILCD Manual

24 September 2024

CyberPower Value1000EILCD Manual

24 September 2024

CyberPower UT1050EI Manual

24 September 2024

UPS Manualer

Nyeste UPS Manualer

APC RBC150 Manual

2 April 2025

APC RBC151 Manual

2 April 2025

APC Symmetra LX 4kVA Manual

30 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Teltonika BAT120 Manual

30 Januar 2025

APC BX1000M Manual

30 Januar 2025

APC BX850 Manual

30 Januar 2025