CyberPower SM120KMF Manual

CyberPower UPS SM120KMF

Læs gratis den danske manual til CyberPower SM120KMF (5 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om CyberPower SM120KMF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

User’s Manual

SM20KPM

SM200KMF

SM120KMF

SM060KMF

CyberPower Systems, Inc.

www.cyberpower.com

Safety Precautions

Modular UPS SM series User Manual - 1 -

Safety Precautions

This manual contains information concerning the installation and operation of Modular UPS . Please carefully read this manual prior to installation.

The Modular UPS cannot be put into operation until it is commissioned by engineers approved by the manufacturer (or its agent) Not doing so .

could result in personnel safety risk, equipment malfunction and invalidation of warranty.

The UPS has been designed for commercial or industrial use only, and is not intended for use in any life support This is a CLASS application. C

Uninterruptible Power Supply (UPS) product. In a domestic environment, this product may cause radio interference, in which case, the user may be

required to take additional measures.

Conformity and standards

This product complies with CE73/23 & 93/68 (low voltage safety) and 89/336 (EMC), and the following UPS product standards:

*IEC62040-1-1-General and safety requirements for use in operator access area

*IEC/EN62040-2 EMC requirements CLASS C

*IEC62040-3 Performance requirements and test methods

For more details, refer to Chapter 9. Continued compliance requires installation in accordance with these instructions and the use of

manufacturer approved accessories only.

WARNING: high earth leakage current

Earth connection is critical before connecting the input supply (include both utility supply and battery).

"Earth leakage current introduced by the UPS, in any configuration from 10kW to 200kW, exceeds 3.5 mA and is less than 1000 mA and

complies with the requirements of IEC/EN 62040 1 / IEC/EN 60950 1" Transient and steady state earth leakage currents, which may occur when - - -

starting the equipment, should be taken into account when selecting instantaneous RCCB or RCD devices.

Residual Current Circuit Breakers (RCCBs) must be selected sensitive to DC unidirectional pulses (class A) and insensitive to transient current

pulses.

Note also that the earth leakage currents of the load will be carried by this RCCB or RCD.

This equipment must be earthed in accordance with local electrical authority codes of practice.

WARNING: back-feeding protection

This system has a control signal available for use with an automatic device, externally located, to protect against feeding voltage through back-

the mains Static Bypass circuit. If this protection is not used with the switchgear that is used to isolate the bypass circuit, a label must be added

to the switchgear to advise service personnel that the circuit is connected to a UPS system.

The text has the following meaning or is equivalent to: Isolate the UPS before working on the circuit of this UPS.

Components that can be maintained by user

All the equipment maintenance and servicing procedures involving internal access need special tools and should be carried out only by trained

personnel. The components that can only be accessed by opening the protective cover with tools cannot be maintained by user.

This UPS full complies with “IEC62040 General and safety requirements for use in operator access area UPS”. Dangerous voltages are -1-1-

present within the battery box. However, the risk of contact with these high voltages is minimized for non service personnel. Since the component -

with dangerous voltage can only be touched by opening the protective cover with a tool, the possibility of touching high voltage component is

minimized. No risk exists to any personnel when operating the equipment in the normal manner, following the recommended operating

procedures in this manual.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	UPS
Model:	SM120KMF

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower SM120KMF stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

UPS CyberPower Manualer

CyberPower Smart App Sinewave PR2000RT2U Manual

30 December 2025

CyberPower Smart App Sinewave PR2000RTXL2UTAA Manual

8 December 2024

CyberPower CP425G Manual

2 Oktober 2024

CyberPower SM180KMFX Manual

24 September 2024

CyberPower RT33030KE Manual

24 September 2024

CyberPower SM300KMFX Manual

24 September 2024

CyberPower OLS3S20KEXL Manual

24 September 2024

CyberPower Value800EILCD Manual

24 September 2024

CyberPower Value1000EILCD Manual

24 September 2024

CyberPower UT1050EI Manual

24 September 2024

UPS Manualer

Nyeste UPS Manualer

APC RBC150 Manual

2 April 2025

APC RBC151 Manual

2 April 2025

APC Symmetra LX 4kVA Manual

30 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Teltonika BAT120 Manual

30 Januar 2025

APC BX1000M Manual

30 Januar 2025

APC BX850 Manual

30 Januar 2025