D-Link DWR-933M Manual

D-Link Wifi hotspot DWR-933M

Læs gratis den danske manual til D-Link DWR-933M (2 sider) i kategorien Wifi hotspot. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om D-Link DWR-933M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DWR-933M

Quick

Installation

Guide

Package Contents

USB Ty pe-C to Type-A cable Step 3:

Take note of the password

Locate the label beneath the battery to ﬁnd the factory assigned

Administrator username, password, and Wi-Fi keys. Make sure

to note down the password and keys.

USER : a dmi n

PASSWORD: XXXXXXX

W-F I KEY: X XXXXX X

Wi-Fi

For configuration guides and the latest software updates,

please visit support.dlink.com.au

You can contac t our Technical Support Team:

Via web site: https://www.dlink.com.au/contac tus

Via Live Chat: https:// support.dlink.com.au/

Via phone (24x7):

Australia: 1300 700 100

New Zealand: 0800 900 900

Ensure that you have conﬁgured the APN settings correctly. Verify with your provider

which APN you should use for their data service.

If your DWR-933M is powered on but does not display the two Wi-Fi SSIDs on the

screen, the router’s Wi-Fi may have been turned oﬀ. To toggle Wi-Fi, access the

router’s conﬁguration interface via the USB cable.

Due to how Mac OS handles USB ports, if you connect the DWR-933M to a diﬀerent

USB port than you originally used, you will need to reinstall the drivers.

I forgot my W i-Fi password. What can I do?

Firstly, you can use WPS to connect other WPS-supported devices to your router’s Wi-

Fi without entering a password. Initiate WPS pairing on your device, then press and

hold the WPS button on the router until the WPS icon appears on the display. Your

device will then automatically connect to the router’s Wi-Fi.

Secondly, you can reset the router to factory settings. The reset button is located

behind a small hole on the side of the router. Using a pin, press and hold the reset

button for 10 seconds to initiate a factory reset. The factory username and password

are printed on the label beneath the battery.

My DWR-93 3M router turns itself o ff. Is it normal?

Yes, it is normal. If there are no Wi-Fi clients connected to the router, it shuts itself

down to preserve battery. To turn it back on, please press the power button.

Step 2:

Connect the DWR-933M to your computer using the USB cable.

The router should get detected and installed automatically.

Step 3:

Open a web browser and type in the address bar. 192.168.1.1

The factory username is “ ” and the password is printed admin

on the label beneath the battery.

Step 4:

Select Mobile Settings and Basic Setup. Choose your mobile

provider from the list or type in your provider’s APN.

MOBILE SETTINGS

USERNAME

PASSWORD

admin

Step 1:

Turn on the DWR-933M by pressing and holding the power

button until the " " message appears on the display.D-Link

Step 1:

Install the D-Link Mobile Connect app on your phone or tablet.

Step 2:

Turn on the DWR-933M by pressing and holding the power

button until the " " message appears on the display.D-Link

Step 3:

Connect your phone to one of the DWR-933M’s Wi-Fi networks.

Factory settings are:

2.4GHz Wi-Fi: D-Link_xxxx_2.4GHz

5GHz Wi-Fi: D-Link_xxxx_5GHz

The factory Wi-Fi password is printed on the label beneath the

battery.

Step 4:

Use the D-Link Mobile Connect app to log into the router.

The factory Admin password is printed on the label beneath the

battery.

Step 5:

Select Mobile Settings and Basic Setup. Choose your mobile

provider from the list or type in your provider’s APN.

Step 6:

Connect the USB cable and plug it into the USB port of a power

adapter or a PC to charge the battery.

Step 5:

Reinsert the battery and reattach the battery cover.

Step 4:

Slide the nano-SlM card bracket to the left until it clicks to

unlock it, then lift it open. Place your nano-SlM card in the tray

with the notch situated at the top-right, then close the bracket

and slide it to the right until it clicks to lock it in place.

Step 2:

Remove the battery using the notch along the top edge of the

battery bay.

Step 1:

Lift oﬀ the back cover by using the notch on the side.

Produkt Specifikationer

Mærke:	D-Link
Kategori:	Wifi hotspot
Model:	DWR-933M

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DWR-933M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Wifi hotspot D-Link Manualer

D-Link DWR-932W Manual

27 August 2025

D-Link DWM-222W Manual

25 August 2025

D-Link DWR-933M Manual

21 Januar 2025

D-Link DWR-2101 Manual

25 Oktober 2022

Wifi hotspot Manualer

Nyeste Wifi hotspot Manualer

Planet WTL-5800BE Manual

8 Oktober 2025

Samsung Connect Home Pro ET-WV531 Manual

24 August 2025

Advantech WISE-1530 Manual

23 August 2025

ZTE MU5120 Manual

23 August 2025

Netgear Nighthawk MR6150 Manual

21 August 2025

Netgear Nighthawk M2 MR2100A Manual

20 August 2025

Netgear Nighthawk M6 Pro MR6110 Manual

20 August 2025

Netgear Nighthawk M2 MR2100B Manual

20 August 2025

Netgear Nighthawk M7 Pro MR7400 Manual

19 August 2025

Netgear Nighthawk M6 Pro MR6520 Manual

8 August 2025