Daewoo DAEM1400 Manual

Daewoo Cementblander DAEM1400

Læs gratis den danske manual til Daewoo DAEM1400 (25 sider) i kategorien Cementblander. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Daewoo DAEM1400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/25

DAEM SERIES

Mezcladora eléctrica / Electric mixer/ Mixer elettrico

Manufactured under license of Daewoo International Corporation, Korea/

Fabricado bajo licencia de Daewoo International Corporation, Corea/

Prodotto su licenza di

Daewoo International Corporation, Corea

www.daewoopowerproducts.com

USER'S MANUAL/ MANUAL DE USUARIO/ MANUALE D’USO

1.GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instruc-

tions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for

future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power

tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to

lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.Unmodified plugs and

matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.Water entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the

risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not

use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions

will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power

source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger

on the switch or energising power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these

are connected and properly used. Use of dust collection can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power

tool will do the job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or the battery pack from the power tool before

making any adjustments, changing accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the

power tool or these instructions to operate the power tool. Power tools are dangerous in the hands

of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and

any other condition that may affect the power tool's operation. If damaged, have the power tool

repaired before use. Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

2.SAFETY INSTRUCTIONS FOR MIXERS

• Always check that the supply voltage is the same as the voltage indicated on the

• Nameplate of the tool

• Never use the tool in or near an explosive atmosphere

• Never mix combustible substances

• Never reach with your hand or any other object into the mixing container during mixing

• Wear protective gloves, a dust mask, close-fitting clothes and sturdy shoes

• The noise level when working can exceed 85 dB(A); wear ear protection

• Always disconnect plug from power source before making any adjustment or changing any

accessory

USE

• On/off

• Switch locking for continuous use

! be aware of the forces that occur as a result of jamming; hold the tool firmly

with both hands and take a secure stance

• Speed control for smooth starting

• Operating the tool

! ensure that the tool is switched off

- mount mixing paddle E onto spindle D as illustrated

- connect plug to power source

- ensure the mixing container is securely positioned on the floor

- dip the mixing paddle into the substance to be mixed

- set wheel C to low speed

- switch on the tool

• gradually increase the mixing speed by turning wheel C to the desired maximum speed (so that

the substance will not splash around and the tool will not be overloaded)

! switch the tool off only when the mixing paddle is in the mixing container

• Electronic soft-start

Ensures reaching the maximum speed smoothly without a sudden impact when tool

is switched on

• Holding and guiding the tool !

! while working, always hold the tool at the grey-coloured grip area(s)

! always hold the tool firmly with both hands

Produkt Specifikationer

Mærke:	Daewoo
Kategori:	Cementblander
Model:	DAEM1400

Har du brug for hjælp?

Hvis du har brug for hjælp til Daewoo DAEM1400 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Cementblander Daewoo Manualer

Daewoo DACM180H Manual

17 Juli 2025

Daewoo DACM200H Manual

15 Juli 2025

Daewoo DACM260H Manual

1 Juli 2025

Daewoo DACM140H Manual

1 Juli 2025

Daewoo DACM160H Manual

30 Juni 2025

Daewoo DAEM1600 Manual

29 Juni 2025

Daewoo DAEM1200 Manual

29 Juni 2025

Daewoo DAEM1400 Manual

28 Juni 2025

Cementblander Manualer

Nyeste Cementblander Manualer

Draper 99511 Manual

23 September 2025

Lescha ABM P135 L Manual

20 September 2025

Lescha Euro-Mix 125 Manual

20 September 2025

Lescha SM 145 S Manual

20 September 2025

Altrad Italia LHB 800 Manual

11 September 2025

RYOBI RMX001 Manual

31 August 2025

Guede GZM 120 Manual

25 August 2025

Graphite 58G084 Manual

8 Juli 2025

Graphite 58GE129 Manual

6 Juli 2025

Draper 56406 Manual

7 Juni 2025