Danfoss JS1 Manual


Læs gratis den danske manual til Danfoss JS1 (4 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Danfoss JS1, eller vil du spørge andre brugere om produktet?

Side 1/4
Mobile Machine Management
The JS1 Heavy Duty Joysticks (JS1-H) portfolio is a
modular joystick design that allows complete grip
and base configuration for efficient control of any
machine. The heavy duty design will result in
extended life for years of reliable operation.
Five different heavy duty grips can be paired with the
JS1-H base to offer the operator complete comfort.
Each of the grips can be configured with a
comprehensive portfolio of finger functions for true
customization.
The JS1-H base incorporates proven Danfoss design
elements and builds on the PLUS+1® architecture.
Several options are available for the electrical and
mechanical output so the joystick can be tailored for a
positive human machine interaction. The JS1-H base
is designed to be dependable and reliable for the
extreme and harsh conditions of the mobile machine
environment.
Features
Hall effect with two sensors per axis or
long life potentiometer position sensing
Simultaneous operation of two
proportional rollers
Operator Presence switch
Options
Axis
Dual Axis Spring Return
Single Axis Spring Return
Single Axis with Friction
Dual Axis with one axis Spring, one axis
Friction
Output options
CAN J1939
CANopen
PVE
CANalog
CAN+
Analog Category 1
Analog Category 3
PWM (programmable)
Ergonomic grip
Right hand
Left hand
Ambidextrous (used with either the left
or right hand)
On axis shaft, deflection
±18°
JS1-H grips
HR1
ST2
ST7
PR2
PR7
Comprehensive technical literature is
online at www.danfoss.com
Data Sheet
Joystick
JS1 Heavy Duty Joysticks
© Danfoss | March 2019 AI00000239en-000901 | 1
Dimensions in millimeters [inches]
10.00 [0.39]
68.80 [2.71]
Ø 72.60 [2.86]
150.00 [5.90]
145.00 [5.73]
18° 18°
88.00 ± 0.05 [3.46 ± 0.002]
Ø 6.00 [0.24]
45.00
[1.77]
90.00 [3.54]
18° 18°
Ø 75.80 [2.98]
10.00 [0.39]
68.80 [2.71]
Ø 72.60 [2.86]Ø 72.60 [2.86]
68.80 [2.71]
10.00 [0.39]
Ø 75.80 [2.98]
18 18°
166.00 [6.55] 190.00 [7.48]
HR1 ST2 PR2
ST7 PR7
190.00 [7.48 ]
18° 18°
Ø 75.80 [2.98]
10.00 [0.39]
68.80 [2.71]
Ø 72.60 [2.86]
10.00 [0.39]
68.80 [2.71]
Ø 72.60 [2.86]
195.20 [7.69]
18°18°
1
2
143.00 [5.63]
43.70 [01.72]
1. Bottom view
2. BC00000347Cable harness (included) based on specific options, see , JS1 Heavy Duty Joysticks Technical Information
Spring return, base only
Breakout load on axis
Standard duty spring: 6 to 8.5 N (3.37 to 5.71 lbf) Heavy duty spring: 12 to 19 N (2.698 to 4.271 lbf)
Friction hold, base only
Friction level Friction Center detent
A Low friction-Low detent 0.8 Nm 1.5 Nm
B Low friction-High detent 0.8 Nm 2.0 Nm
C High friction-High detent 1.6 Nm 3.0 Nm
Friction hold/Spring return, base only
Friction level Spring type
E A Standard
J A Heavy
Data Sheet
JS1 Heavy Duty Joysticks
2 | © Danfoss | March 2019 AI00000239en-000901


Produkt Specifikationer

Mærke: Danfoss
Kategori: Joystick
Model: JS1

Har du brug for hjælp?

Hvis du har brug for hjælp til Danfoss JS1 stil et spørgsmål nedenfor, og andre brugere vil svare dig