Danfoss LLS 4000 Manual


Læs gratis den danske manual til Danfoss LLS 4000 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 85 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 43 anmeldelser. Har du et spørgsmål om Danfoss LLS 4000, eller vil du spørge andre brugere om produktet?

Side 1/5
Installation guide/Electronic part replacement (Not applicable for SIL2 devices)
Liquid Level Switch
Type LLS 4000 / LLS 4000U
148R9652
148R9652
© Danfoss | Climate Solutions | 2022.09 AN331327770735en-000303 | 1
089
Info for UK customers only : Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB
Імпортер:ТОВ з іі “Данфосс ТОВ” 04080, Київ 80, п/с 168, Україна
Fig. 1
Fig. 2
Warning! This is a Class A device. This
device may cause radio interference in
residential areas. In case of interference,
the operator may be required to take
appropriate measures. This instrument
has to be mounted on a metallic tank.
The device is intended to be used in
industrial areas.
O-ring
Cover disassembled LLS
to avoid any access of
particles, moisture or
dirt
M12 male Electrical
connector
Heat sink (insulation allowed, if media temperature
is less than ambient temperature)
Mechanical part Electronic part
Hexagon 32 mm
Liquid sensing part
Process connection
G ¾” or ¾” NPT
© Danfoss | Climate Solutions | 2022.092 | AN331327770735en-000303
Fig. 5 Fig. 4
Fig. 3
If any damage to the O-ring
replace it carefully by use of
appropriate O-ring tooling
Hand-tighten clockwise until O-ring is
compressed and mechanical stop is reached
(max torque 5 Nm/3.7 lb ft)
Hand-tighten
clockwise


Produkt Specifikationer

Mærke: Danfoss
Kategori: Ikke kategoriseret
Model: LLS 4000

Har du brug for hjælp?

Hvis du har brug for hjælp til Danfoss LLS 4000 stil et spørgsmål nedenfor, og andre brugere vil svare dig