Datel PS3 Bluetooth Wireless Headset Manual

Datel Hi-Fi system PS3 Bluetooth Wireless Headset

Læs gratis den danske manual til Datel PS3 Bluetooth Wireless Headset (4 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Datel PS3 Bluetooth Wireless Headset, eller vil du spørge andre brugere om produktet?

Side 1/4
INSTRUCTION MANUAL
PS3 Bluetooth® Wireless Headset
For use with PLAYSTATION®3
Introduction
Congratulations on your purchase of Datel’s
PS3 Bluetooth® Wireless Headset
. Now
you can take charge in PLAYSTATION®3 games with talk or voice control features
with the added benefit of wireless freedom!
Charging the Bluetooth® Wireless Headset
The
PS3 Bluetooth® Wireless Headset
will need charging the first time you use it.
Connect the USB charge cable to a free USB port on your PS3 console and connect
the other end to the charging jack on the headset.
You can continue to use the headset while it charges but try to leave it connected for
at least 8 hrs the first time you charge it to condition the battery. The headset will
charge more quickly when it is not in use.
Headset controls
The PS3 Bluetooth Wireless Headset has three buttons, 2 LED lights and a sliding
cover to expose the mouthpiece as shown in the diagram:
Adjusting the volume
The position of the ‘Volume UP’ and ‘Volume DOWN’ buttons will vary depending
upon the orientation of the earpiece (effectively turning the diagram upside-down)
but their function is illustrated by means of a small [ + ] or [ - ] on the buttons.
When the headset is switched on press the Volume UP and Volume DOWN buttons
to increase or decrease the volume of the earpiece.
The multi-function button
The ‘Multi-function’ button is used for switching the headset on and off, answering
and hanging up calls (when the headset is used in conjunction with a mobile phone)
and for putting the headset into Bluetooth ‘Search-mode’ when registering the
headset with another Bluetooth device (see the next section).
To switch the headset on press and hold the Multi-function button for around 5
seconds until the Power LED flashes quickly then release the button. Repeat the
operation to switch the headset off.
The Power LED
The Power LED will illuminate constantly when your headset is charging (via USB)
and will flash intermittently when the headset is powered on but not charging.
The Power LED will not illuminate at all if the headset is switched off.
Search-mode LED


Produkt Specifikationer

Mærke: Datel
Kategori: Hi-Fi system
Model: PS3 Bluetooth Wireless Headset

Har du brug for hjælp?

Hvis du har brug for hjælp til Datel PS3 Bluetooth Wireless Headset stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hi-Fi system Datel Manualer

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer