Davis DAV-7720 Manual

Davis Ikke kategoriseret DAV-7720

Læs gratis den danske manual til Davis DAV-7720 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Davis DAV-7720, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Rain Collector Heater

Installation Manual

The Rain Collector Heater may be

used to protect the Rain Collector’s

internal components from freezing

and/or to measure the moisture

content of snowfall. When the

heater is on, it is capable of

melting snow at a rate of 1/4''

(6 mm) of liquid precipitation per

hour. It may not be able to keep up

with larger rates of snowfall.

The rain collector heater warms

only the inside of the rain collector

and the cone itself.

Please note that we have made every attempt to design and manufacture a

safe product, but Davis Instruments assumes no liability for any injury or

damage caused directly or indirectly by the installation or use of this

product.

Note: Although the nominal heater voltage is not hazardous, a short in the wall

transformer could cause hazardous voltage to appear on the heater

wires. For safety, you should always turn the heater’s power unit to the

“OFF” position before removing the rain collector’s cone. We also

recommend that you unplug the wall transformer before removing the

rain collector’s cone.

This instruction manual is designed to take you step-by-step through the

process required to install and use your rain collector heater. Please take the

time to read through this manual before beginning the process.

Note: This heater is not compatible with AeroCone rain collectors. You will need

to replace the AeroCone on your sensor suite, if you have one, with a

classic cone.

Components

The rain collector heater includes the following components. Please make sure

you have all listed components before continuing.

• — Includes heater element, thermostat, and terminal Heater assembly

block for power cable.

• Wall transformer with power unit

• Insulation blanket

• 50' (15 meter) heater cableThe Installation Hardware Kit includes:

• Three cable ties

• Two #6-32 x 3/4” screws

• Two #6-32 hex nuts

• Two #6-32 split lock washers

• Two #4 x 3/8'' self-tapping screws

Components

Heater Assembly

Insulation Blanket

Heater Cable

50' (15 meter)

Cable Ties (3)

Wall Transformer

with Heater Power Unit

#6-32 x 3/4"

Screws (2)

with Lock Washers

and Hex Nuts

#4 x 3/8"

Self-tapping

Screws (2)

Produkt Specifikationer

Mærke:	Davis
Kategori:	Ikke kategoriseret
Model:	DAV-7720

Har du brug for hjælp?

Hvis du har brug for hjælp til Davis DAV-7720 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Davis Manualer

Davis DAV-7720 Manual

10 Januar 2025

Davis DAV-7716 Manual

10 Januar 2025

Davis DAV-7714 Manual

10 Januar 2025

Davis DAV-6351 Manual

10 Januar 2025

Davis DAV-7654 Manual

10 Januar 2025

Davis DAV-6316 Manual

10 Januar 2025

Davis DAV-6420 Manual

5 September 2024

Davis DAV-6410 Manual

5 September 2024

Davis DAV-7747 Manual

24 August 2024

Davis WeatherLink Manual

24 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

OmniMount POWER40 Manual

17 Juni 2025

OmniMount OL50FT Manual

17 Juni 2025

Intermatic FD30MHW Manual

17 Juni 2025

Toorx SRX-EVOLVE Manual

17 Juni 2025

OmniMount WorldMount 2N1-L Manual

17 Juni 2025

OmniMount WorldMount 4N1-L Manual

17 Juni 2025

Intermatic FD60MC Manual

17 Juni 2025

Microchip MPFS160TLS Manual

17 Juni 2025

Hughes & Kettner Metal Master Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16516310 Manual

17 Juni 2025