Davis DAV-7747 Manual

Davis Ikke kategoriseret DAV-7747

Læs gratis den danske manual til Davis DAV-7747 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Davis DAV-7747, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Daytime Fan-Aspirated Radiation

Shield Kit Installation Manual

For Vantage Pro2™ & Vantage Pro2 Plus™ Stations

Introduction

The instructions describe how to upgrade a non-aspirated Vantage Pro2 radia-

tion shield to a Daytime Fan-Aspirated Radiation Shield.

The upgrade kit can be installed on any Vantage Pro2 or Vantage Pro2 Plus

Integrated Sensor Suite (ISS) equipped with a non-aspirated radiation shield.

Components

The upgrade kit includes the following components:

Closed Cap Plate

Open Cap Plate

Open Plate

SIM Cover

Fan Plate

Daytime Fan Kit Components

Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisnet.com

Installing the Daytime Fan Kit

The kit also includes the following hardware:

Tools Needed

You may need some or all of the following tools to complete the upgrade:

• A medium Phillips-Head screwdriver

• A medium slot-tip screwdriver

• Other tools as required to remove and re-mount the ISS

Installing the Daytime Fan Kit

Installation Overview

These are the steps to install the Daytime Fan components:

1. — Put the console into Setup Mode.For Consoles Only

2. Take the ISS down from its installed position.

3. Disassemble the standard radiation shield.

4. Check Temperature/Humidity sensor orientation.

5. Assemble the lower section of the fan-aspirated shield.

6. Install the fan unit.

7. Assemble the upper section of the fan-aspirated shield.

8. Re-Install the ISS.

9. Take the console out of Setup Mode.

For Consoles Only— Put Console in Setup Mode

If you have a console, you need to put it in Setup Mode. This prevents the

reception of erroneous data while you are removing the ISS.

If you have an Envoy and are concerned with erroneous data, you may edit the

data via the WeatherLink software. See the WeatherLink Online Help for more

information.

#8-32 x 3-1/4" Screws

(3)

#8-32 x 1/2" Screws

(3) Threaded Spacers

(3)

#8 Split-Lock Washers (6)

#8 Flat Washers (6)

12" Cable Ties (2)

Daytime Fan Kit Hardware

Produkt Specifikationer

Mærke:	Davis
Kategori:	Ikke kategoriseret
Model:	DAV-7747

Har du brug for hjælp?

Hvis du har brug for hjælp til Davis DAV-7747 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Davis Manualer

Davis DAV-7720 Manual

10 Januar 2025

Davis DAV-7716 Manual

10 Januar 2025

Davis DAV-7714 Manual

10 Januar 2025

Davis DAV-6351 Manual

10 Januar 2025

Davis DAV-7654 Manual

10 Januar 2025

Davis DAV-6316 Manual

10 Januar 2025

Davis DAV-6420 Manual

5 September 2024

Davis DAV-6410 Manual

5 September 2024

Davis DAV-7747 Manual

24 August 2024

Davis WeatherLink Manual

24 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

OmniMount POWER40 Manual

17 Juni 2025

OmniMount OL50FT Manual

17 Juni 2025

Intermatic FD30MHW Manual

17 Juni 2025

Toorx SRX-EVOLVE Manual

17 Juni 2025

OmniMount WorldMount 2N1-L Manual

17 Juni 2025

OmniMount WorldMount 4N1-L Manual

17 Juni 2025

Intermatic FD60MC Manual

17 Juni 2025

Microchip MPFS160TLS Manual

17 Juni 2025

Hughes & Kettner Metal Master Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16516310 Manual

17 Juni 2025