Dell W-AP105 Manual

Dell Ikke kategoriseret W-AP105

Læs gratis den danske manual til Dell W-AP105 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Dell W-AP105, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

AP-105 Mounting Kit

Installation Guide

0510651-02 | July 2010 1

Introduction

The AP-105 Wall Mounting kit provides two options, with built-in security features, for mounting your

AP-105 to a wall. Use the Box Mount Bracket to install the AP over wall box and use the Wall Mount

Bracket to install the AP directly on a wall.

The kit includes the following:

z1x plastic Box Mount Bracket

z1x plastic Wall Mount Bracket

Figure 1 AP-105-MNT

Figure 2 AP-105-MNT-DC

Required Tools

zA screwdriver that matches the screws used for mounting your brackets.

zAn M5 (Metric) or 3/16" (Standard) hex key.

N O T E

This installation guide pertains to both the AP-105-MNT and AP-105-MNT-DC. The AP-105-MNT can only be

used with an AP that is powered by Power Over Ethernet (PoE), while the AP-105-MNT-DC allows the use of a

DC power source.

AP105_008

Box Mount Bracket Wall Mount Bracket

AP105_008

Wall Mount Bracket

Box Mount Bracket

2 AP-105 Mounting Kit | Installation Guide

Installation

1. Before securing your mount to a double-gang box or directly to the wall, route the ethernet cable

through the openings show in Figure 3.

Figure 3 Cable Routing

2. Install your mounting bracket.

For the Wall Mount Bracket (Figure 4):

a. Before installing your Wall Mount Bracket, install the appropriate wall anchors. Screws and wall

anchors are not included.

b. Align the screw holes in the mount with the holes or anchors on the wall.

c. Insert the screws and tighten them to secure your Wall Mount Bracket.

Figure 4 Wall Mount Bracket Installation

For the Box Mount Bracket:

a. Align the screw holes in the mount with the those in the gang box, as shown in Figure 5.

b. Insert the screws and tighten them to secure your Box Mount Bracket.

AP105_010

Box Mount Bracket Cable Route

to ENET Port

Cable from

Gang Box

Wall Mount Bracket

AP105_012

N O T E

If you plan to permanently connect a serial console cable to the AP installed over a gang-box, you must use the

Wall Mount Bracket instead of the Box Mount Bracket. This provides the necessary space behind the AP to run

both cables.

Produkt Specifikationer

Mærke:	Dell
Kategori:	Ikke kategoriseret
Model:	W-AP105

Har du brug for hjælp?

Hvis du har brug for hjælp til Dell W-AP105 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dell Manualer

24 Juli 2025

5 Juli 2025

4 Juli 2025

8 Juni 2025

Dell Pro WH5024 Manual

20 Februar 2025

Dell PowerConnect B-DCX-4s Manual

8 December 2024

Dell NX3330 Manual

8 December 2024

Dell Latitude 9440 Manual

1 September 2024

Dell PowerConnect 3248 Manual

25 August 2024

Dell PowerConnect 6024 Manual

25 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025