- 2 -
1. Contents
Instructions
Important
Product
Informations
2. Presentation
TYXAL+ DME 180 is a passive infrared motion detector, designed to detect the infrared
radiation emitted by human bodies.
This motion detector aims to protect the outside of a building by detecting intrusions prior to
penetration into the premises. As soon as a presence is detected, it raises the alarm.
TYXAL+ DME 180 has an automatic system to protect it against being opened or ripped from
its mount.
It is also equipped with anti-masking detection, to prevent attempts to mask the lens.
2 installation heights are possible:
- low position, between 0.8 and 1.2 m: 180° detection, 12 m range.
- high position, 2 m : 180° detection, 9 m range.
• Paired with a control unit:
- alarm signal.
- pre-alarm signal: as soon as a person enters the protected zone, an audible and visual
signal (outdoor siren) warns you of the imminent alarm.
Read the entire guide before
starting to install the device.
Note
This product detects temperature dierences between moving and background targets
within the detection zone.
If the target remains motionless, the motion detector cannot detect it. This may aect the
detector's maximum detection range.
N°1
For optimal operation, please comply with the following recommendations:
In the event of non-compliance, the product may present malfunctions or may not function
optimally.
2 installation heights are possible:
- low position, between 0.8 and 1.2 m: 180° detection, 12
m range.
- high position, 2 m : 180° detection, 9 m range.
3. Location