Delta GT-DB-01b Manual

Delta Dørklokke GT-DB-01b

Læs gratis den danske manual til Delta GT-DB-01b (2 sider) i kategorien Dørklokke. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Delta GT-DB-01b, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Model

GT-DB-02w / GT-DB-02b

In the box

• Transmitter (doorbell, inscribable), incl. mounting

plate, 2 wall plugs, 2 screws and double-sided ad-

hesive foam.

• Receiver (mains connection plug)

• Operating instructions incl. warranty

Explanation of symbols

This symbol/signal word indicates a

hazard with a moderate risk which,

if it is not avoided, can result in fatal or serious injury.

This signal symbol/word warns of

possible material damage.

This symbol gives you additional useful informa-

tion on the layout or operation of the product.

Class III: appliances in this class are operated

with safety extra-low voltage (SELV).

Class II: increased or double insulation be-

tween active and touchable parts. Mostly

without connection to the protective conductor.

IPX4 Protection against splashing water.

IP20:

Protected against penetration by solid objects

with a diameter >12.5 mm. No protection against water.

Transmitter: suitable for indoor and outdoor

use.

Receiver: only for use indoors

Alternating current

RCM (Regulatory Compliance Mark)

The product complies with the requirements

of the applicable Australian standards.

Application notes and warnings

Before starting up the product, please read

and follow the instructions, particularly

the safety and installation instructions.

Keep the instructions for reference later and pass

them on to any subsequent owner.

The Transmitter (doorbell) is suitable for indoor and

outdoor use.

The Receiver (mains connection plug) is only suita-

ble for indoor use.

The product is designed for private use.

Metal objects can have a negative effect on

the range between the Transmitter and Re-

ceiver. Do not position the Transmitter and Receiver

on or near metal objects.

Risk of suffocation! Children play-

ing with the packaging ﬁ lm can

become entangled in it and choke.

This electrically operated product is not a toy. Do not let

children play with the product or the packaging ﬁ lm.

Keep the product out of reach of children.

This product can be used by children from age 8 and

by persons with reduced physical, sensory, or men-

tal skills or lack of experience and/or knowledge, if

they are supervised or have been instructed in safe

use of the product and have understood the result-

ing dangers.

Cleaning and maintenance may not be carried out

by unsupervised children.

Risk of electric shock! Do not op-

erate the Receiver (mains connec-

tion plug) with wet hands.

Keep the Receiver away from contact with mois-

ture/water or any other liquid.

Checking the package contents

Risk of electric shock! Do not make

any technical changes to the

Transmitter and Receiver. Do not open the hous-

ing and do not insert any objects into the inside of

the housing

If parts are visibly damaged, stop using the prod-

uct to prevent hazards.

Remove all parts from the packaging and check that

the contents are complete and undamaged. Contact

the service address given on the guarantee card if

necessary.

Dispose of the packaging material in an environ-

mentally friendly way.

Starting up

Fire risk!

Do not cover the connected Receiver (mains con-

nection plug), e.g. with fabric, paper or plastic.

Risk of damage!

Only connect the Receiver (mains connection plug)

if the mains voltage of the power socket matches the

data on the nameplate.

Connect the Receiver only to an easily accessible

socket, so that you can disconnect it from the mains

quickly in the event of a fault.

Installation

Before you install the Transmitter in the planned

place, make sure that it functions properly. The

Transmitter and Receiver must be connected ﬁ rst if

necessary (radio connection).

- Connect the Receiver to the planned power socket.

- Press the Bell button on the Transmitter:

No signal at the receiver? –> Keep Melody

button 1 pressed for approx. 3 seconds until

2 short sounds can be heard.

Press the Bell button 2 brieﬂ y within 30 seconds.

- Position the Transmitter in the planned place and

press the Bell button to make sure that the Re-

ceiver receives the signal from the transmitter.

The distance may be too large, or the signal

is disrupted by metal objects. In this case,

you can remove the reception by moving the

Transmitter or Receiver.

Disconnecting the connection between the Re-

ceiver and Transmitter

If you want to disconnect the Transmitter (door-

bell) from the Receiver, press the Melody but-

ton 1 for approx. 10 seconds. After 2 short sounds can

be heard for the second time, the radio connection no

longer exists.

Attaching the Transmitter with the adhesive foam

With the help of the foam, the Transmitter

(doorbell) can be connected horizontally or

vertically to a smooth surface. It can then be removed

from the mounting plate, if necessary, by pushing in

the direction of the labelling ﬁ eld.

Attaching the Transmitter with wall plugs and

screws

Risk of electric shock! Before install-

ing, make sure that there are no wa-

ter pipes or power cables in the area of the drillholes!

Risk of damage!

DIY skills and tools are required for the permanent in-

stallation. Contact an experienced ﬁ tter if necessary.

Push the mounting plate in the direction of the Bell

button to remove it from the back of the Transmitter.

- Use a screwdriver, for example, to clear the screw

holes provided.

- Position the mounting plate in the planned place

and mark the drilling points.

- Use a 6 mm drill bit to drill holes 35 mm deep.

- Insert the wall plugs and screw on the mounting

plate.

Use the elongated screw retainer of the mount-

ing plate to align the plate horizontally or verti-

cally before tightening the screw if the drilled holes

are not exactly horizontal or vertical.

- Position the Transmitter on the mounting plate

and push it in the direction of the Bell button.

Kinetic wireless doorbell

GT-DB-02wGT-DB-02b

User Manual

MODEL:

GT-DB-02w, GT-DB-02b

831615

02/2024

The Transmitter name-

plate can be inscribed. To

do so, unhook the protective

ﬁ lm ﬁ rst.

- Press the ﬁ lm down slightly

with your ﬁ ngernail or a suit-

able object and remove it.

- Foil can be reinserted accord-

ingly.

Operation

The Receiver has 18 melo-

dies to choose from as a signal sound and a sig-

nal light. The sound volume can be set to 4 levels.

Setting the volume

Press the Volume button 3 repeatedly to increase the

signal volume in 4 levels.

Setting the melody

Press the Melody button 1 repeatedly to select the re-

quired signal melody (18 melodies).

Setting the signal type

You can choose between the following with the posi-

tion of the selector switch 4:

- melody signal only (switch in top position),

- light signal only (switch in middle position),

- melody with light signal (switch in bottom position).

Cleaning and Storage

Before cleaning, always discon-

nect the mains connection plug

from the mains! Risk of electric shock!

Risk of damage!

Do not use abrasive, solvent, or sharp-edged tools!

Clean the product with a slightly dampened cloth

and a mild washing up liquid.

Leave the product to properly dry and ideally store it

in its original packaging.

Disposal

Disposing of the packaging

Dispose of the packaging separated into single type ma-

terials. Dispose of cardboard and carton as waste paper

and foils via the recyclable material collection service.

Disposing of old devices

Old devices must not be disposed of with

household waste!

Should the device no longer be capable of being used

at some point in time, dispose of it in accordance with

the regulations in force in your city or state.

Please ensure your recycling information applies to

the local regulations.

Technical data

Receiver (mains connection plug)

(Class II, suitable for indoors)

IP20

Input: 220-240 V~, 50 Hz

Range: approx. 100 m (clear view)

Frequency: 433,05 - 434,79 MHz

Transmitter (doorbell)

(Class III, suitable for indoors and outdoors)

IPX4

Range: approx. 100 m (clear view)

Frequency: 433,05 - 434,79 MHz

Signal strength: max. 10 dBmv

Design and technical changes are possible, as we

continuously develop and improve our products.

These operating instructions can also be downloaded

from our website www.gt-support.de as a PDF ﬁ le.

ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you

are not entirely satisfied with this product, please return it to the nearest ALDI store within 60 days from the

date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the

supplier’s Customer Service Hotline.

Made in China

DELTA® is a registered trademark of ALDI Stores

DISTRIBUTED BY:

ALDI STORES

1 SARGENTS ROAD

MINCHINBURY NSW 2770

www.aldi.com.au

Kinetic wireless doorbell

Repair and Refurbished Goods

or Parts Notice

TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

Unfortunately, from time to time, faulty products are manufactured

which need to be returned to the Supplier for repair.

Please be aware that if your product is capable of retaining user-

generated data (such as files stored on a computer hard drive,

telephone numbers stored on a mobile telephone, songs stored on a

portable media player, games saved on a games console or files stored

on a USB memory stick) during the process of repair, some or all of your

stored data may be lost.

We recommend you save this data elsewhere prior to sending the

product for repair.

You should also be aware that rather than repairing goods, we

may replace them with refurbished goods of the same type or use

refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are

only used where they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you

may escalate your complaint. Please telephone us on 1800 269 981 or

write to us at:

Wunsche (Australia) Pty Ltd

c/o Install and Fix Solutions Pty Ltd

Unit 1, 9 Kingsbury Street Brendale, Queensland 4500

AUSTRALIA

Hotline: 1800 269 981

Operating hours: 8.30-6.00 pm Monday – Friday

support@wunsche.com.au

YEAR

WARRANTY

YEAR

WARRANTY

AFTER SALES SUPPORT AFTER SALES SUPPORT

support@wunsche.com.au support@wunsche.com.au1800 269 981 1800 269 981

Kinetic wireless doorbell

Warranty Details

TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

The product is guaranteed to be free from defects in workmanship and

parts for a period of 12 months from the date of purchase. Defects that

occur within this warranty period, under normal use and care, will be

repaired, replaced or refunded at our discretion. The benefits conferred

by this warranty are in addition to all rights and remedies in respect

of the product that the consumer has under the Competition and

Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund

for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Produkt Specifikationer

Mærke:	Delta
Kategori:	Dørklokke
Model:	GT-DB-01b

Har du brug for hjælp?

Hvis du har brug for hjælp til Delta GT-DB-01b stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Dørklokke Delta Manualer

Delta GT-DB-01b Manual

4 September 2024

Delta GT-DB-01w Manual

1 September 2024

Dørklokke Manualer

Nyeste Dørklokke Manualer

Heidemann 70027 Manual

14 September 2025

Heidemann 70519 Manual

14 September 2025

Cata CORONA WH 60 Manual

11 September 2025

Cata LEGEND 7000 XGBK Manual

11 September 2025

Cata THALASSA 900 GBK Manual

11 September 2025

Cata GOYA PRO 90 BK Manual

11 September 2025

Cata GOYA 70 BK &ROCA Manual

11 September 2025

Cata TFB-5150 X Manual

11 September 2025

Cata GRECO 80 WH &ROCA Manual

11 September 2025

Cata THALASSA PRO 600 GBK Manual

11 September 2025