Denver BTN-210 Manual

Denver Headset BTN-210

Læs gratis den danske manual til Denver BTN-210 (4 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 81 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 41 anmeldelser. Har du et spørgsmål om Denver BTN-210, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Safety information

Please read the safety instructions carefully before using the product for the ﬁrst time

and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.

2. Warning: This product includes lithium polymer batteries.

3. Keep product out of the reach of children and pets to avoid chewing and swallowing.

4. Product operating and storage temperature is from 0 degree Celsius to 40 degree

Celsius. Under and over this temperature might affect the function.

5. Never open the product. Touching the inside electrics can cause electric shock. Repairs

or service should only be performed by qualiﬁed personnel.

6. Do not expose to heat, water, moisture, direct sunlight!

7. Please remove the earphones in case of any leakage or excessive heat from the product

to avoid burns or rash.

8. Please protect your ears against loud volume. Loud volume can damage your ears and

risk in hearing loss.

9. Bluetooth wireless technology operates within a range of about 10 m (30 feet). The

maximum communication distance may vary depending on the presence of obstacles

(people, metal objects, walls, etc.) or the electromagnetic environment.

10. Microwaves emitting from a Bluetooth device may affect the operation of electronic

medical devices.

11. The unit is not waterproof. If water or foreign objects enter the unit, it may result in ﬁre

or electric shock. If water or a foreign object enters the unit, stop use immediately.

Charge It

• On the right earcup,carefuIIy plug the Type-C cable into Type-C charging port. and

connect the other end of the cable to either a computer USB port or to a USB-compatible

car or wall charger.

• Solid red LED light will appear to indicate when the headphone is charging.

• When charging is complete, the LED light will turn Blue.

• Charging time is approximately 2 hours.

Turn It On/Off

• Press & hold the power button on the right side of the headphone for about 3 seconds

until the LED indicator light turns on.

• Press & hold the power button again for 4 seconds until the LED light turns off.

Pair & Connect With New Device

ENG 1

• Power on the wireless bluetooth headphone(refer to the "Turn It On" section).

• To pair the headphone with a new device,the Red and blue LED light blink to indicate it

isready to be paired with your device.

NOTE:If the headphone is not used within 5 minutes.the headphones will automatically

turn off to save battery.

Play

Touch Function

• Press + area(refer to product Diagram) to nex track.

• Press - area(refer to product Diagram) to previous track.

• Press & Hold + area(refer to product Diagram) to turn up the volume.

• Press & Hold - area(refer to product Diagram) to turn down the volume.

• Press ANC buton once then the White LED light on means ANC function turn on.

ENG 2

Troubleshooting

• No power

- Recharge your wireless bluetooth headphone using the Type-C cable.

• Music is not playing over Bluetooth

- Make sure your Bluetooth device has A2DP proﬁle. Check if both devices are paired and

connected over Bluetooth.Restart the headphone to reconnect your Bluetooth device.

• Bluetooth device will not reconnect with the headphone

- Navigate to your Bluetooth settings menu on your Bluetooth device,tap “DENVER

BTN-210” , and select "Forget" .

- Now follow the steps to pair your device again.Or, press & hold the power button on the

headphone (while powered on) to disconnect the headphones from any connected

devices. hen follow the steps to reconnect your device.

• For safety reasons,please do not charge the headphones while using them.

• Connect your device to the headphone via Bluetooth(refer to the” Pair & Connect" section)

• Open your favorite music app and press play.

• Control the music,track & volume from your device,or control the music & volume.Press the

Power button once to play/pause music & answer caIIs,press it twice to redial the last

number called on your phone,and press & hold it to reject an incoming call.

• All audio,incIuding music,games,videos,and notiﬁcations will be routed through the

headphone.

• On your Bluetooth-enabled smartphone,tabIet or media player,navigate to the Bluetooth

settings menu,turn on the Bluetooth feature,and search for new devices After a few

seconds you will see “DENVER BTN-210” listed.

• Tap this modei to select it.Solid blue LED light indicate your device has successfully paired.

• With your previously paired device’s Bluetooth turned on and in range,The headphone will

automatically reconnect to the last Bluetooth device it was connected to.

Produkt Specifikationer

Mærke:	Denver
Kategori:	Headset
Model:	BTN-210
Bredde:	190 mm
Dybde:	80 mm
Højde:	165 mm
Produktfarve:	Sort
Kontroltype:	Knapper
Batterikapacitet:	300 mAh
Produkttype:	Headset
Pakkevægt:	320 g
Pakkedybde:	75 mm
Pakkebredde:	200 mm
Pakkehøjde:	168 mm
Bluetooth:	Ja
Batteriteknologi:	Lithium-Ion (Li-Ion)
USB-stik:	USB Type-C
Volumenkontrol:	Knap
Antal:	1
Kabler inkluderet:	USB Type-C
Pakketype:	Kasse
Bluetooth-version:	5.1
Anbefalet brug:	Opkald/musik
Forbindelsesteknologi:	Trådløs
Bæremåde:	Headset
Headset type:	Binaural
USB-tilslutning:	Ja
Hovedtelefon følsomhed:	-25 dB
Mikrofontype:	Indbygget
Batteridrevet:	Ja
Batteritype:	Indbygget batteri
Opladningskilde:	USB
Trådløs rækkevidde:	10 m
Støjreduktion:	Ja
Ørekobling:	Intraaural
Støjreduktionstype:	Aktiv
Vedvarende afspilningstid, lyd:	20 t