Diamond Audio LOC22 Manual

Diamond Audio Ikke kategoriseret LOC22

Læs gratis den danske manual til Diamond Audio LOC22 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Diamond Audio LOC22, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

LOC22 | 2 Channel Line-Output Converter

LOC24 | 4 Channel Line-Output Converter

Quick Start Guide

GAIN

Variable: -27.3dB — +3.2dB

Allows gain adjustment of

the output signal

CLIP

Indicates signal clipping when

gain is set to high

REMOTE

Rem ntrol Knobote Level Co

for Rear Channels

RCA SIGNAL OUTPUTS

BOOST

Variable: 0dB — 12dB

When LPF is ON, provides

Bass Boost (45Hz) for

Rear Channels

LPF

Low Pass Filter

Allows 250Hz low pass

filter for Rear Channels

LOAD SELECT

Selectable: 20Ω / 60Ω / 20kΩ

Default: 20kΩ

For factory audio systems

requiring a resistance load to

output audio, select 60Ω first,

then 20Ω. All others use 20kΩ

setting

SPEAKER SIGNAL INPUTS

Connect to head unit or

FULLY OPEN TERMINALS

BEFORE INSERTING WIRE

12V

Connect to a fused

+12V constant source

GND

Connect to a good

chassis ground

REM IN

Remote turn on input (+)

REM OUT

Remote turn on output (+)

The LPA will provide a

+12V Remote Output using

DC Signal Sense from the

Right channel inputs

GROUND ISOLATION

Selectable: GND / ISO / 200Ω

Default: ISO

If ground / engine noise is present,

the jumper can be repositioned

Features & Wiring Information

The Diamond Audio LOC22 and LOC24 can be used to add ampliﬁers to an audio that does not have RCA outputs

or when replacing OEM Radio and retaining the factory ampliﬁed system. Variable Gain Controls with Clipping

Indicators, Selectable Ground Isolation and Load Select features ensure a pu e, noise-fr ree signal for any type of

audio system.

This Quick Start Guide will get you going, but if you need additional help or information, please visit our website

or contact Technical Support.

Installation

Speaker level input from a radio to RCA level output for an aftermarket ampliﬁer is the most commonly used

conﬁguration for the LOC22 and LOC24. This will create RCA level outputs from a radio that only has speaker level

outputs.

Below, the Positive (+) and Negative (-) wires of two speakers are “tapped” and connected to the ampliﬁers turn-on/

When the radio is turned on. the LOC will continue to play as normal. The REM OUT is connected to the ampliﬁers

turn-on. When the radio is turned on, the Converter will automatically turn on the ampliﬁer. Lastly, the RCA Signal

Outputs from the LOC are connected to the aftermarket ampliﬁers inputs.

CHASSIS GROUND (-)

12V CONSTANT POWER (+)

REMOTE AMP TURN-ON

CHASSIS GROUND (-)

12V CONSTANT POWER (+)

REMOTE AMP TURN-ON

Produkt Specifikationer

Mærke:	Diamond Audio
Kategori:	Ikke kategoriseret
Model:	LOC22

Har du brug for hjælp?

Hvis du har brug for hjælp til Diamond Audio LOC22 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Diamond Audio Manualer

Diamond Audio MSHR4 Manual

9 Juni 2025

Diamond Audio MSDSP66 Manual

9 Juni 2025

Diamond Audio MSDSP88 Manual

9 Juni 2025

Diamond Audio LOC24 Manual

8 Juni 2025

Diamond Audio SB426 Manual

8 Juni 2025

Diamond Audio DXM1200.1D Manual

8 Juni 2025

Diamond Audio LOC22 Manual

8 Juni 2025

Diamond Audio HX02 Manual

8 Juni 2025

Diamond Audio DESMB8A Manual

8 Juni 2025

Diamond Audio HX42 Manual

8 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Edimax HP-5103 Manual

24 Juli 2025

Oceanic OCEACV100IFW2 Manual

24 Juli 2025

Aiphone GT-NSB Manual

24 Juli 2025

Edimax HP-5121ESK Manual

24 Juli 2025

Edimax EW-7438APn Manual

24 Juli 2025

Aiphone GF-1P Manual

24 Juli 2025

Gymrex GR-TR03 Manual

24 Juli 2025

DJI O4 Air Unit Manual

24 Juli 2025

Amica MTD 1016 Manual

24 Juli 2025

SilentiumPC Elementum E2 SI 450W Manual

24 Juli 2025