Digitus DN-80064-1 Manual

Digitus Skifte DN-80064-1

Læs gratis den danske manual til Digitus DN-80064-1 (5 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Digitus DN-80064-1, eller vil du spørge andre brugere om produktet?

Side 1/5
Gigabit Ethernet
Switch 8-port, unmanaged,
Desktop
Quick Installaon Guide
DN- 4-1 8006
2
Installaon
Precauons for Installation
Do not install the device in an unstable locaon such as on an
unsteady table or an inclined surface.
Do not place another hub or object that generates heat on this
unit.
Please route all cables properly to prevent people from tripping
over them.
Ensure the air vents on the product are not blocked by other
equipment or walls.
Only use the power cable included with the product. Using other
power cables may result in damage or re.
Mounng to a Wall
To mount the unit directly to the wall, use 2 screws (not included).
Install the screws apart and slide the mounng holes on the base of
the switch over them.
Install on the Desk
Put on the Desk, connect with the Network Cable and the power
adapter
1. INTRODUCTION
With this Gigabit Ethernet Switch you can easily expand your
Network with eight addional RJ45 Network ports. Thanks to the
Auto-MDI/MDI-X cable detecon every port can be used as uplink.
Automac detecon of network speeds 10/100/1000Mbps. No driver
of soware installaon necessary.


Produkt Specifikationer

Mærke: Digitus
Kategori: Skifte
Model: DN-80064-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Digitus DN-80064-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig