Dito Sama 600142 Manual

Dito Sama Ikke kategoriseret 600142

Læs gratis den danske manual til Dito Sama 600142 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Dito Sama 600142, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Introduction

1.1 DESCRIPTION

• This electronic beater-mixer is an appliance for professional

use in bakery-patisserie and in the kitchen designed for kneading,

mixing and whipping all kinds of food products. Version A (with the

accessory drive hub) adapted for in the kitchen allows accessory

machines to be driven.

A Stainless steel bowl, 9.9 litre capacity

B Removable safety guard

C Planetary gear

D H12 type accessory socket

E Head

F Top cover

G Control panel

Contents

• There are 3 standard tools available:

A A spiral hook for kneading dough

B A paddle for mixing

C A whisk for emulsifying

1 XBE10 GB 10 2023

10/2023

Introduction 1

Installation 1

Use, safety 3

Cleaning, hygiene 5

Fault nding 5

Maintenance 6

Conformity with regulations 8

This document is to be used in conjunction with the original manufacturer’s manual.

The symbols correspond with the numbered drawings of the original manual.

H Frame

I Bowl cradle

J Legs

1.1a

1.1b

• Optional equipment:

- Accessory machines: vegetable preparation machines, mincers,

etc. (see § 3.6).

The reference language for these instructions is French.

Introduction

The User Manual contains useful information for the user on how

to work correctly and in complete safety, and is designed to make it

easier to use the machine (called «machine» or «appliance» below).

What follows is in no case intended to be a long list of warnings and

constraints, but rather a series of instructions meant to improve the

service provided by the machine in every respect, and particularly

to avoid a series of injuries or damage to equipment that might

result from inappropriate procedures for use and management.

It is essential that all the people responsible for transporting, ins-

talling, commissioning, using, maintaining, repairing or dismantling

the machine should consult this manual and read it carefully be-

fore proceeding with the various operations, in order to avoid any

incorrect or inappropriate handling that might be result in damage

to the machine or put people’s safety at risk.

It is just as important that the Manual should always be available

to the operator and it should be kept carefully where the machine

is used ready for easy and immediate consultation in case of any

doubt, or in any case, whenever the need arises.

If after reading the Manual, there are still any doubts concerning

how to use the machine, please do not hesitate to contact the

Manufacturer or approved After Sales Service provider, who is

constantly available to ensure quick and careful service for im-

proved machine operation and optimum e󰀩ciency.

Note that the safety, hygiene and environmental protection stan-

dards currently applicable in the country where the machine is

installed must always be applied during all phases of machine

operation. Consequently it is the user’s responsibility to ensure

that the machine is operated and used solely under the optimum

safety conditions laid down for people, animals and property.

Installation

ATTENTION!!

Machine storage: -25°C to +50°C

Ambient temperature for operation: +4°C to +40°C

This machine is for professional use and must be used by sta󰀨 trained to use, clean and maintain it, in terms or reliability and safety.

Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard

EN 12464-1)

When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the

lower limbs.

The machine is not designed for use in explosive atmospheres.

2.2 LOCATION

• The beater mixer must be tted on a support that is perfectly

stable and horizontal, between 400 and 700 mm high and not

resonant (e.g. a unit, table, etc.).

• Check the direction of rotation

- Of the planetary gear, anti-clockwise (See arrow on head).

- Or of the tool, in a clockwise direction .

To change the direction of rotation, see § 5.2

2.1 DIMENSIONS - WEIGHT (for information only)

- Gross weight packaged : 58 Kg

- Net weight with equipment : 37 Kg

- Dimensions of packaging : 650 x 480 x 800 mm

- Overall dimensions : 601 x 454 x 656 mm

• Motor characteristics :

• This mixer-whisk is to be supplied with single-phase current.

• Provide an accessible standardized wall outlet with 2 poles +

ground, rated at 16A in accordance with IEC60309, and a cor-

responding waterproof plug to be installed on the power cord.

Supply Nominal Frequency Current Electrical

voltage. (V) output (W) (Hz) (A) cons..(Kw/h)

230 750 50/60 4,3 0,8

115 750 50/60 8,6 0,8

2.3

2.1

The machine must be earthed

In certain circumstances depending on the sensitivity of the

protective cut-outs, it may be necessary to install SI-type

(super immunity) devices to prevent untimely triggering.

Note: The machine can only be used on TN (earthing

to neutral) and TT (earthed neutral) type supplies.

Where a machine has to be installed on an IT (impeding

or isolated neutral) supply, there is a solution which

consists of inserting an isolating transformer and locally putting

on the machine on TN or TT supply.

• Warning for the installer:

This electronic whisk is tted with a lter which sends any in-

terference from the mains to earth without going through the

variator. To work properly, the appliance earth connection must

be sound otherwise the interference may go through the variator

and damage it.

NO EARTH = NO PROTECTION = RISK OF BREAKDOWN

Note: The earth values are dened according to the

residual di󰀨erential current. Non-compliance with these

instructions may result in invalidation of the warranty.

To PAT test the Electrolux Range of Food Preparation Equipment,

the PCB board needs to be disconnected before any test is done.

This is due to the fact that the boards are tted with a grounding

diode that can give incorrect result during such a test. Also on a

standard appliance a ash test of 25 amps and up to 3000v is

used but, as you would expect, to use this on equipment, which

has a printed circuit, board would be quite destructive to that

board. We would recommend the use of a PAT tester approved

for computer systems which use a lower rate of amps.

The appliance is perfectly safe and is CE certicated. There are

two ways to get overcome this problem.

· Disconnect the board as instructed and test using test for PC’s,

· Or install the mixer on a fused spur (no plug) as this takes it

away from being a portable appliance and the PAT test is then

not needed.

ATTENTION!!

Connection to the electrical power supply must be done according to proper professional practice by a qualied and authorised

person (see current standards and legislation in the country of installation).

If an adapter is used on the socket, a check must be made that the electrical characteristics of this adapter are not lower than those

of the machine.

Do not use multiple plugs

The AC power supply to the machine must comply with the following conditions (EN60204-1);

- Maximum voltage variation: ±10%

- Maximum frequency variation: ±1% on a continuous basis, ± 2% over short periods

ATTENTION: the electrical installation must comply (for design, creation and maintenance) with the legal and standard

requirements in the country where used.

- Check that the electric mains voltage and the value shown on the specication plate.

- The machine’s electrical power supply must be protected against voltage surges (short-circuits and excess voltages) using a

circuit breaker compliant with IEC60947-2 properly sized, of the appropriate gauge relative to the place of installation and machine

specications

ATTENTION: Concerning protection against indirect contact (depending on the type of power supply provided and

connection of the exposed conductive parts to the equipotential protection circuit), refer to point 6.3.3 of EN 60204-1 (IEC

60204-1) with the use of protection devices for automatic shut-o󰀨 of power in the event of an insulation fault with a TN or

TT, system, or for the IT system, with the use of a permanent insulation or di󰀨erentials controller for automatic shut-o󰀨.

The requirements of IEC 60364-4-41, 413.1 must apply for this protection.

For example: in a TN or TT system, a di󰀨erential circuit breaker must be installed upline of the power supply, with a suitable

power cut-o󰀨 (e.g.: 30 mA) on the earthing installation for the place where it is planned to install the machine.

ATTENTION: Failure to comply with these instructions means the customer runs the risk of machine failure and/or acci-

dents due to direct or indirect contacts.

2.3 ELECTRICAL CONNECTION

XBE10 GB 10 2023 2

Produkt Specifikationer

Mærke:	Dito Sama
Kategori:	Ikke kategoriseret
Model:	600142

Har du brug for hjælp?

Hvis du har brug for hjælp til Dito Sama 600142 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dito Sama Manualer

Dito Sama 602285 Manual

13 August 2025

Dito Sama 603511 Manual

13 August 2025

Dito Sama 600454 Manual

13 August 2025

Dito Sama 600171 Manual

13 August 2025

Dito Sama 603506 Manual

13 August 2025

Dito Sama 602284 Manual

13 August 2025

Dito Sama 600139 Manual

13 August 2025

Dito Sama 600182 Manual

13 August 2025

Dito Sama 600453 Manual

13 August 2025

Dito Sama 600166 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Eliminator Lighting Electro 86 Manual

13 August 2025

American Audio Accu Roller 250 Manual

13 August 2025

Moulinex Inicio IM1226 Manual

13 August 2025

Adj Eco UV Bar Plus Manual

13 August 2025

American Audio Q-SD Manual

13 August 2025

Tefal Pro Minute Anti-Calc GV8800 Manual

13 August 2025

American Audio Tri Star Manual

13 August 2025

American Audio CDI-500 Manual

13 August 2025

Rowenta Gourmet Pro OC7878 Manual

13 August 2025

Plus More MO-T008 Manual

13 August 2025