Dito Sama 600185 Manual

Dito Sama Ikke kategoriseret 600185

Læs gratis den danske manual til Dito Sama 600185 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Dito Sama 600185, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
Contents
Di󰀨erent models
Di󰀨erent models 1
Introduction 1
Installation 2
Use, safety 3
Cleaning and hygiene 5
Fault nding 6
Maintenance 6
Conformity with regulations 7
• Check that the model and its characteristics correspond on the
identication plate attached to the frame.
This document is to be used in conjunction with the original manufacturer’s manual.
The symbols correspond with the numbered drawings of the original manual.
1.1b
• Beater-mixers of 60/80 litre capacity with electric controls for
the speed variator and the bowl cradle.
• Beater-mixers of 60/80 litre capacity with accessory hub. Electric
controls..
Introduction
1.1 DESCRIPTION
• These beater mixers are professional bakery - confectionery
machines for kneading, mixing and whisking all types of foods-
tu󰀨s. The models "A" are adapted for use in the kitchen and
can be used to drive accessories.
A Stainless steel bowl, 60/80 litre capacity
B Protective guard with removable spout and with
additional plastic screen
C Planetary gear
D Control panel
E Head
G Column
I Bowl locking knob
J Bowl cradle
K Leg
L Rubber foot
• There are 3 standard tools available as standard:
A A spiral hook for kneading dough.
B A paddle for mixing.
C A whisk for emulsifying.
•
Common optional equipment for the 60/80 l models "A":
- Strengthened 40 litre and 60 litre whisks for di󰀩cult work.
- Reduced bowl of 40 litre with 3 tools (60/80 l).
- Reduced bowl of 60 litre with 3 tools (80 l).
- 60 litre perforated paddle for light mixing.
- 40/60 litre mixer for mixing meat (meat processing).
- 60/80 litre bowl scraper.
- 60 and 80 litre bowl trolleys (supplied as standard with the 80l).
• Optional equipment for 60/80 l models "A" only:
- Machine accessories (see §3-5).
- Dish holder for collecting products under the mincer, vegetable
cutter, sieve.
10/2023
GB
Introduction
The User Manual contains useful information for the user on how
to work correctly and in complete safety, and is designed to make it
easier to use the machine (called “machine” or “appliance” below).
What follows is in no case intended to be a long list of warnings
and constraints, but rather as a series of instructions meant to
improve the service provided by the machine in every respect,
and particularly to avoid a series of injuries or damage to equip-
ment that might result from inappropriate procedures for use
and management.
It is essential that all the people responsible for transporting,
installing, commissioning, using, maintaining, repairing or dis-
mantling the machine should consult this manual and read it
carefully before proceeding with the various operations, in order
to avoid any incorrect or inappropriate handling that might be
result in damage to the machine or put people’s safety at risk.
It is just as important that the Manual should always be available
to the operator and it should be kept carefully where the machine
is used ready for easy and immediate consultation in case of any
doubt, or in any case, whenever the need arises.
If after reading the Manual, there are still any doubts concerning
how to use the machine, please do not hesitate to contact the
Manufacturer or approved After Sales Service provider, who is
constantly available to ensure quick and careful service for im-
proved machine operation and optimum e󰀩ciency.
Note that the safety, hygiene and environmental protection stan-
dards currently applicable in the country where the machine is
installed must always be applied during all phases of machine
operation. Consequently it is the user’s responsibility to ensure
that the machine is operated and used solely under the optimum
safety conditions laid down for people, animals and property.
1 XBE60/80 GB 06 2015
The reference language for these instructions is French.
2.1a-b
Installation
In the case of the machine being handled manually, take all
necessary precautions to avoid it tilting, especially forwards
(centre of gravity marked G).
- To remove it from the pallet, raise the beater with a fork lift truck
(lifting points marked F).
2. DIMENSIONS - WEIGHT (for information only)1
A Gross weight packaged (kg).
B Net weight with equipment (kg).
C Dimensions of packaging (mm).
D Size of machine: L x W x H (mm).
• Handling - transport
- The beater is supplied packed on a wooden pallet.
2.1a
2.2 LOCATION
• To pack or level the machine (max. adjustment 10 mm):
- Unscrew the attachment screws of the feet (13 mm socket
spanner).
- Adjust the foot then lock in position.
2
.
2
- Check that it is stable by running the machine at high speed
with the paddle.
• To anchor the machine or table to the ground:
- Counter drill the attachment holes of the feet (8 mm dia. screw
max., min. length 30 mm, rawl plugs not supplied).
ATTENTION!!
Machine storage: -25°C to +50°C
Ambient temperature during operation: +4°C to +40°C
This machine is for professional use and must be used by sta󰀨 trained to use, clean and maintain it, in terms or reliability and safety.
Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard
EN 12464-1)
When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the
lower limbs.
The machine is not designed for use in explosive atmospheres.
2.3 ELECTRICAL CONNECTION
ATTENTION!!
Connection to the electrical power supply must be done according to proper professional practice by a qualied and authorised
person (see current standards and legislation in the country of installation).
If an adapter is used on the socket, a check must be made that the electrical characteristics of this adapter are not lower than those
of the machine.
Do not use multiple plugs
The AC power supply to the machine must comply with the following conditions EN60204-1;
- Maximum voltage variation: ±10%
- Maximum frequency variation: ±1% on a continuous basis, ± 2% over short periods
ATTENTION: the electrical installation must comply (for design, creation and maintenance) with the legal and standard
requirements in the country where used.
- Check that the electric mains voltage, the value shown on the specication plate.
- The machine’s electrical power supply must be protected against voltage surges (short-circuits and excess voltages) using a cir-
cuit breaker compliant with IEC60947-2 properly sized, of the appropriate gauge relative to the place of installation and machine
specications – see the specications shown in column G of gure 2.3a
ATTENTION: Concerning protection against indirect contact (depending on the type of power supply provided and connection
of the exposed conductive parts to the equipotential protection circuit), refer to point 6.3.3 of EN 60204-1 (IEC 60204-1) with
the use of protection devices for automatic shut-o󰀨 of power in the event of an insulation fault with a TN or TT, system, or
for the IT system, with the use of a permanent insulation or di󰀨erentials controller for automatic shut-o󰀨. The requirements
of IEC 60364-4-41, 413.1 must apply for this protection.
For example: in a TT system, a di󰀨erential circuit breaker must be installed upline of the power supply, with a suitable power
cut-o󰀨 (e.g.: 30 mA) on the earthing installation for the place where it is planned to install the machine.
ATTENTION: Failure to comply with these instructions means the customer runs the risk of machine failure and/or accidents
due to direct or indirect contacts.
XBE60/80 GB 10 2023 2

Produkt Specifikationer

Mærke: Dito Sama
Kategori: Ikke kategoriseret
Model: 600185

Har du brug for hjælp?

Hvis du har brug for hjælp til Dito Sama 600185 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Dito Sama Manualer

Dito Sama

Dito Sama 602285 Manual

13 August 2025
Dito Sama

Dito Sama 603511 Manual

13 August 2025
Dito Sama

Dito Sama 600454 Manual

13 August 2025
Dito Sama

Dito Sama 600171 Manual

13 August 2025
Dito Sama

Dito Sama 603506 Manual

13 August 2025
Dito Sama

Dito Sama 602284 Manual

13 August 2025
Dito Sama

Dito Sama 600139 Manual

13 August 2025
Dito Sama

Dito Sama 600182 Manual

13 August 2025
Dito Sama

Dito Sama 600453 Manual

13 August 2025
Dito Sama

Dito Sama 600166 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

EasyMaxx

EasyMaxx 00632 Manual

3 Oktober 2025
Sony

Sony ODBK-201 Manual

3 Oktober 2025
Sony

Sony CCMC-SA10 Manual

3 Oktober 2025
Arctic

Arctic Céramique 2 Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 12803 Manual

3 Oktober 2025
Sony

Sony BKM-200M Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 01950 Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 00629 Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 15642 Manual

3 Oktober 2025
Vestil

Vestil EHLTP-3064-1-60-A3 Manual

3 Oktober 2025