Dito Sama 600456 Manual

Dito Sama Ikke kategoriseret 600456

Læs gratis den danske manual til Dito Sama 600456 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Dito Sama 600456, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Refer to the numbered drawings that relate to the numbered paragraphs

K45-55-70 GB 10 06

1.1

2.1

Contents

Introduction 1

Installation 1

Use and safety 2

Cleaning and hygiene 4

Fault-ﬁnding 4

Maintenance 4

Compliance with regulations 5

Parts list - exploded view A

Electrical diagrams M

Introduction

1.1 DESCRIPTION

• This professional food processor / emulsiﬁer can be used in

the preparation of minces, blends and emulsions, in particular

in a hospital environment, in gourmet catering and in dietetics.

It can also be used as a food processor / mixer by removing the

scraper for grinding or kneading the hardest of products.

• For special preparations which do not come under the scope

of food: (PLEASE CONTACT US)

A Removable bowl-lid scraper handle with

centre pourer hole

B Removable transparent lid with centre pourer hole

C Lid locking handle

D Bowl handle

E Bowl (capacity 4.5, 5.5 or 7 litres depending on model)

F Casing

G Non-slip pads

H Body

I Power supply lead

J Control panel

K Locking pin

Installation

2.1 DIMENSIONS - WEIGHT (INDICATION ONLY)

A Gross packaged weight (Kg)

B Net weight (Kg)

C Packaging dimensions (mm): L x W x H

D Machine dimensions: L x W x H (mm)

E Space required for opening and removal: L1 x W x H1

(mm)

09/2021

Introduction

The User Manual contains useful information for the user on

how to work correctly and in complete safety, and is designed

to make it easier to use the machine (called “machine” or “ap-

pliance” below).

What follows is in no case intended to be a long list of warnings

and constraints, but rather as a series of instructions meant to

improve the service provided by the machine in every respect,

and particularly to avoid a series of injuries or damage to equi-

pment that might result from inappropriate procedures for use

and management.

It is essential that all the people responsible for transporting,

installing, commissioning, using, maintaining, repairing or dismant-

ling the machine should consult this manual and read it carefully

before proceeding with the various operations, in order to avoid

any incorrect or inappropriate handling that might be result in

damage to the machine or put people’s safety at risk.

It is just as important that the Manual should always be available

to the operator and it should be kept carefully where the machine

is used ready for easy and immediate consultation in case of any

doubt, or in any case, whenever the need arises.

If after reading the Manual, there are still any doubts concerning

how to use the machine, please do not hesitate to contact the

Manufacturer or approved After Sales Service provider, who

is constantly available to ensure quick and careful service for

improved machine operation and optimum efﬁciency.

Note that the safety, hygiene and environmental protection stan-

dards currently applicable in the country where the machine is

installed must always be applied during all phases of machine

operation. Consequently it is the user’s responsibility to ensure

that the machine is operated and used solely under the optimum

safety conditions laid down for people, animals and property.

ATTENTION!!

Machine storage: -25°C to +50°C

Ambient temperature during operation: +4°C to +40°C

This machine is for professional use and must be used by staff trained to use, clean and maintain it, in terms or reliability and

safety.

Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard

EN 12464-1)

When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the

lower limbs.

The machine is not designed for use in explosive atmospheres.

2.2 POSITION

• Stand the appliance on a working surface (table, base, etc.)

of a height of between 700 and 900 mm. Its 4 pads provide it

with perfect stability.

• It does not need to be ﬁxed and can easily be moved.

The reference language for these instructions is French.

Produkt Specifikationer

Mærke:	Dito Sama
Kategori:	Ikke kategoriseret
Model:	600456

Har du brug for hjælp?

Hvis du har brug for hjælp til Dito Sama 600456 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dito Sama Manualer

Dito Sama 602285 Manual

13 August 2025

Dito Sama 603511 Manual

13 August 2025

Dito Sama 600454 Manual

13 August 2025

Dito Sama 600171 Manual

13 August 2025

Dito Sama 603506 Manual

13 August 2025

Dito Sama 602284 Manual

13 August 2025

Dito Sama 600139 Manual

13 August 2025

Dito Sama 600182 Manual

13 August 2025

Dito Sama 600453 Manual

13 August 2025

Dito Sama 600166 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rothenberger ROWELD P110 Manual

12 November 2025

Rothenberger ROWELD P500B Premium CNC SA Manual

12 November 2025

Jacuzzi ST06826 Manual

12 November 2025

KUCACCI Keypad Smart Door Lock Manual

12 November 2025

Soundsphere SS-Q-12AWR Manual

12 November 2025

PowerWalker BP A72T-6x9Ah Manual

12 November 2025

Sunnydaze Decor CRE-621 Manual

12 November 2025

Advance AquaPLUS AXP Manual

12 November 2025

Pentax IQZoom 105WR Manual

12 November 2025

EXSYS EX-44044-2 Manual

12 November 2025