Dito Sama CC0H65 Manual

Dito Sama Skæremaskine CC0H65

Læs gratis den danske manual til Dito Sama CC0H65 (8 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Dito Sama CC0H65, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Refer to the numbered drawings which correspond to the paragraph

numbers in the instructions

Introduction 1

Installation 1

Use and safety 3

Cleaning, hygiene and storage 6

Fault nding 6

Maintenance 7

Conformity with regulations 8

1 TR260 GB 08 2024

1.1

2.1

Contents

Introduction

1.1 DESCRIPTION

•

This multi-purpose vegetable cutter can be used to slice, slice

thinly, shred, grate and cut into cubes various food products

(preparation of crudités, vegetables, fruits, cheese, etc.)

With its varied cutting equipment which provides a high hourly

throughput, it is the professional vegetable cutter for community

kitchens and small industrial kitchens.

D Lid locking

E Motor protection casing

F Hopper raising handle

G Automatic hopper

H Feed stick

I Small hopper

J Lever-operated hopper

L Lid hinge pin

A Storage rack

B Press lever

C Electric controls

Installation

2.1 OVERALL DIMENSIONS - WEIGHT (for information only)

•

Dimensions of the machine with auto. hopper

- without table: 750 x 490 x 680

- with table: 750 x 490 x 1345

•

Dimensions of the machine with standard hopper

- without table: 860 x 535 x 615

- with table: 860 x 535 x 1280

•

Handling - Transport

- When packed the machine is meant to be lifted using a forklift

truck or a pallet transporter.

- Where the machine is manually handled on its own, two persons

will be required.

•

Packaged dimensions L x w x h (mm):

- TR260 motor unit: 800 x 520 x 580

- Net weight: 49 kg - Packaged weight: 58 kg

- Auto. hopper: 800 x 520 x 580

- Net weight: 15 kg - packaged weight: 23 kg

- Standard hopper + container: 560 x 490 x 610

- Net weight: 18 kg - Packaged weight: 22 kg

- Cabbage hopper: 560 x 490 x 610

- Net weight: 15 kg - Packaged weight: 19 kg

•

Table packaged dimensions: 750 x 500 x 200

08/2024

Introduction

The User Manual contains useful information for the user on how

to work correctly and in complete safety, and is designed to make

it easier to use the machine (called «machine» or «appliance»

below).

What follows is in no case intended to be a long list of warnings and

constraints, but rather a series of instructions meant to improve the

service provided by the machine in every respect, and particularly

to avoid a series of injuries or damage to equipment that might

result from inappropriate procedures for use and management.

It is essential that all the people responsible for transporting,

installing, commissioning, using, maintaining, repairing or dis-

mantling the machine should consult this manual and read it

carefully before proceeding with the various operations, in order

to avoid any incorrect or inappropriate handling that might be

result in damage to the machine or put people’s safety at risk.

It is just as important that the Manual should always be available

to the operator and it should be kept carefully where the machine

is used ready for easy and immediate consultation in case of any

doubt, or in any case, whenever the need arises.

If after reading the Manual, there are still any doubts concerning

how to use the machine, please do not hesitate to contact the

Manufacturer or approved After Sales Service provider, who is

constantly available to ensure quick and careful service for im-

proved machine operation and optimum e󰀩ciency.

Note that the safety, hygiene and environmental protection stan-

dards currently applicable in the country where the machine is

installed must always be applied during all phases of machine

operation. Consequently it is the user’s responsibility to ensure

that the machine is operated and used solely under the optimum

safety conditions laid down for people, animals and property.

The reference language for these instructions is French.

ATTENTION !!

Machine storage: -25°C to +50°C

Ambient temperature during operation: +4°C to +40°C

This machine is for professional use and must be used by sta󰀨 trained to use, clean and maintain it, in terms or reliability and safety.

Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard

EN 12464-1)

When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the

lower limbs.

The machine is not designed for use in explosive atmospheres.

Produkt Specifikationer

Mærke:	Dito Sama
Kategori:	Skæremaskine
Model:	CC0H65

Har du brug for hjælp?

Hvis du har brug for hjælp til Dito Sama CC0H65 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Dito Sama Manualer

Dito Sama 600438 Manual

13 August 2025

Dito Sama 600980 Manual

13 August 2025

Dito Sama 600979 Manual

13 August 2025

Dito Sama 600435 Manual

13 August 2025

Dito Sama 600433 Manual

13 August 2025

Dito Sama 602206 Manual

13 August 2025

Dito Sama 603432 Manual

13 August 2025

Dito Sama 600982 Manual

13 August 2025

Dito Sama 600970 Manual

12 August 2025

Dito Sama 600428 Manual

12 August 2025

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Vollrath Redco Instacut Manual

15 December 2025

Maestro MR-590 Manual

8 December 2025

Maestro MR-591 Manual

8 December 2025

Omcan 11399 Manual

5 December 2025

Vevor SK-720L Manual

2 December 2025

Vevor PGYHJ3626 Manual

2 December 2025

Lakeland 62167 Manual

2 December 2025

Vevor PGYHJ2814 Manual

1 December 2025

Vevor PGYHJ2615 Manual

30 November 2025

Sommertal AS170 Manual

30 November 2025