DJI Ronin 4D Flex Manual

DJI Ikke kategoriseret Ronin 4D Flex

Læs gratis den danske manual til DJI Ronin 4D Flex (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om DJI Ronin 4D Flex, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
1
2 m.
No. Using the cable in series will destabilize the camera link and may lead to frame drops.
Ronin 4D Flex is only applicable to DJI Ronin 4D. It enables the X9 gimbal camera to be used
independently from the Ronin 4D main body.
You can mount accessories like the left and right Hand Grips of Ronin 4D, the Ronin 4D High-Bright Main
Monitor, and the DJI RS Focus Motor (2022) to the extended gimbal connector module.
Yes. Ronin 4D Flex supports up to three focus motors.
Motor (2022) to the extended gimbal connector module, update the focus motor to the latest rmware, fi
and connect it to the USB-C port on the bottom of the gimbal. <br>
Focus motors can be used in series.
1. Remove the main monitor from the Ronin 4D main body. Loosen the screws of the main monitor
pivot using a hex key. Attach the pivot to the lower mounting ports of the monitor, and fasten the
screws.
2. Connect the main monitor cable to the Display Port on the gimbal connector module of Ronin 4D Flex.
Attach the main monitor to the cold shoe of the gimbal connector module and tighten the screw.
3. Connect the Hand Grip Adapter to the CAN ports of Ronin 4D Flex.
4. Press and hold the power button on the gimbal connector module to turn on/o Ronin 4D. After ff
powering on, press the power button on the gimbal connector module once to start/stop recording.
FAQ
2
No.
DJI Ronin 4D Flex does not have independent rmware. When using with Ronin 4D, you need to update fi
Ronin 4D and the gimbal camera to the latest rmware.fi
No.
1. Make sure the lever of the left hand grip is in the unlocked position. Insert the left hand grip into the
hand grip adapter on the gimbal connector module until it clicks, and then push the lever all the way
down.
2. Attach the right hand grip following the same instructions.
No. Despite having the same port type, the internal communication line sequence is di erent.ff
No.
FAQ

Produkt Specifikationer

Mærke: DJI
Kategori: Ikke kategoriseret
Model: Ronin 4D Flex

Har du brug for hjælp?

Hvis du har brug for hjælp til DJI Ronin 4D Flex stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret DJI Manualer

DJI

DJI Ronin 4D Flex Manual

30 Juni 2025
DJI

DJI RC-N3 Manual

3 April 2025
DJI

DJI Mic Mini Charging Case Manual

21 Februar 2025
DJI

DJI Osmo Action Extreme Battery Plus Manual

6 November 2024
DJI

DJI Avinox Drive System Manual

23 September 2024
DJI

DJI Zenmuse H20 Manual

23 September 2024
DJI

DJI SDR Transmission Manual

5 September 2024
DJI

DJI RS 4 Manual

2 September 2024
DJI

DJI Power 1000 Manual

2 September 2024
DJI

DJI Power 500 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Jensen

Jensen Iso-Max VRD-1FF Manual

30 Juni 2025
Alphacool

Alphacool Core RX 7900XTX Red Devil Manual

30 Juni 2025
Ikea

Ikea TRIXIG 906.002.34 Manual

30 Juni 2025
Hoshizaki

Hoshizaki KM-1601SWJ Manual

30 Juni 2025
Supermicro

Supermicro MCP-220-82616-0N Manual

30 Juni 2025
Hoshizaki

Hoshizaki HS-5243 Manual

30 Juni 2025
Ikea

Ikea TRIXIG 606.002.40 Manual

30 Juni 2025
Ikan

Ikan Mylo MB4-TK Manual

30 Juni 2025
Mercyu

Mercyu MRU-93 Manual

30 Juni 2025
SilverCrest

SilverCrest VE-6037SCR Manual

30 Juni 2025