DLS CAD 15 Manual

DLS Bilradio/cd-afspiller CAD 15

Læs gratis den danske manual til DLS CAD 15 (12 sider) i kategorien Bilradio/cd-afspiller. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6 anmeldelser. Har du et spørgsmål om DLS CAD 15, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
How to install and operate
the
DLS CAD11
&
DLS CAD15
digital mono amplifiers
Welcome!
This owners manual is written in easy english and
uses a lot of drawings to simply the installation and
use of the above amplifier.
Your DLS amplifier must be installed correctly in or-
der to work well. This manual will show you how to
install the amplifier like a pro. Please read the entire
manual before beginning the installation.
Install the amplifier yourself if you feel confident with
our instructions and if you have the proper tools.
However if you feel unsure, turn over the installa-
tion job to someone better suited to it.
Warranty Service
This amplifier is covered by warranty, depending
on the conditions in the country where it is sold. If
the amplifier is returned for service, please include
the original dated receipt with the product.
Technical Assistance
For technical assistance ask the shop where the
product was sold or the distributor in your very coun-
try.
You can always phone the DLS Helpdesk in Sweden
+ 46 31 84 00 60 or send an e-mail to info@dls.se.
Information can also be found on our WEB-site
www.dls.se
Contents
Specifications................................ 1
Features…………………………….. 2
Installation…………………….……. 2
Tools and materials needed………. 3
Amplifier installation kit………….... 3
Routing Wires…………………….... 3
Wiring
Power and Outputs……………..…. 4
Inputs and controls………………... 5
Input level control.......................... 5
Crossovers…………...................... 5
Phase control.....………………...… 5
Bass boost control......................... 6
Remote bass level control............. 6
Speaker wiring:
Single amplifier system………….…. 6
Testing............................................. 6
Bridging two CAD11......................... 7
Bridging two CAD15........................ 8
Subwoofer connections…………….. 9
Professional tips............................... 10
Technical data.................................. 11
Trouble shooting.............................. 11
DLS Svenska AB
P.O. Box 13029
S-40251 Göteborg, Sweden
Tel: +46 31 840060
Fax: +46 31 844021
E-mail: info@dls.se
www.dls.se
DLS Svenska AB - 2007-01-10
We follow a policy of continuous advancement in
development. For this reason all or part of specifications
& designs may be changed without prior notice.
Approval of electromagnetic compatability according
to the EEC Directive 95/54/EC
E 13 CAD15 approval No: 022944
CAD11 approval No: 022495
CAD11 &15 include
RCA input and output
High level input with auto start
Continuous variable low pass crossover
Continuous variable subsonic crossover
Bass boost feature
Remote bass level control
Phase control cont. variable 0-180 degrees
Bridge mode master / slave selector
Electronic protection circuitry against
short-circuit, DC offset and thermal overload.
Installation
Before you begin the install
Before you begin you need to read the manual, to have
some tools, cables and other material available. There
is one such list of material on the following page.
Amplifier location
Important
Allow air circulation around the amplifier.
2
Disconnect Battery
Before starting the instal-
lation, always disconnect
the negative terminal of
the battery.
The DLS Peformance series of amplifiers have a
compact design that allows great flexibility in
mounting. You can mount it under a seat or in the
trunk.
When you select a location, do remember that the
amplifier generates a lot of heat.
Choose a location where air can circulate freely
around the amplifier. Do not cover the amplifier with
carpets or hide behind trim panels.
Do not mount the amplifier in an inverted or upside
down position.
Check all locations and placements carefully before
making any cuts, drilling any holes or making any
connections.
This is the best direction to
mount the amplifier to get
the best cooling.
CAD11, CAD15
DLS logo on amplifier cooling flange
The DLS logo on top of the amplifier is attached
with two hex. screws. The logo can be removed
and twisted 90 or 180 degrees, and then screwed
back in wanted position. The logo can be mounted
in four different ways to match your installation.
Removal of side flanges
In order to fasten the amplifier to the surface and
connect speaker and power cables, the flanges on
the sides must be removed. This is done by
loosening the hex screws on top of the amplifier.
Use a 3 mm hex key.
Remove these
screws using a 3
mm hex. key for
removal of side
flange. Remount
after fastening the
amplifier and
connection of the
speaker and power
cables.

Produkt Specifikationer

Mærke: DLS
Kategori: Bilradio/cd-afspiller
Model: CAD 15

Har du brug for hjælp?

Hvis du har brug for hjælp til DLS CAD 15 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bilradio/cd-afspiller DLS Manualer

DLS

DLS RA 10 Manual

25 August 2024
DLS

DLS CAD 15 Manual

25 August 2024

Bilradio/cd-afspiller Manualer

Nyeste Bilradio/cd-afspiller Manualer

JVC

JVC KS-AX6604 Manual

15 Januar 2025
Fusion

Fusion PP-AM8004 Manual

19 September 2024
Belson

Belson BS12100 Manual

26 August 2024
Mx Onda

Mx Onda MX1500 Manual

25 August 2024
Belson

Belson BS12150 Manual

25 August 2024
Belson

Belson BS11900 Manual

25 August 2024
Belson

Belson BS11520 Manual

25 August 2024
Mx Onda

Mx Onda HUESCA Manual

25 August 2024
Mx Onda

Mx Onda BAEZA Manual

25 August 2024
Mx Onda

Mx Onda T825M Manual

25 August 2024