Doepfer A-180 Manual


Læs gratis den danske manual til Doepfer A-180 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Doepfer A-180, eller vil du spørge andre brugere om produktet?

Side 1/4
doepfer System A - 100 MULTIPLES A-180
1
1. Introduction
Module A-180 (MULTIPLES) is a multi-connector.
It has eight inter-connected sockets, so that you can
patch more inputs or outputs into any module.
The sockets can be split into two groups of four by
disconnecting an internal solder bridge.
Modification from Dezember 2003: The module is
shipped in the dual quad version (two groups with 4
connected sockets each, no solder bridge). To obtain
a 8-fold multiple the solder bridge has to be installed.
The modification was made as normally two quad
multiples are more often needed that a 8-fold multiple.
A-180
MULTIPLES
solder bridge
A-180 MULTIPLES System A - 100 doepfer
2
2. Overview In / Outputs
! ... (: 8 interconnected sockets
H By removing the internal solder link between
sockets $ and % you can split the multiples
into two groups of four:
Group 1: sockets ! to $
Group 2: sockets % to (.
That way, you have two separate four-way
distribution matrices.
H From Dezember 2003 this version is the
factory setting !
A-180
MULTIPLES


Produkt Specifikationer

Mærke: Doepfer
Kategori: Ikke kategoriseret
Model: A-180

Har du brug for hjælp?

Hvis du har brug for hjælp til Doepfer A-180 stil et spørgsmål nedenfor, og andre brugere vil svare dig