Doepfer A-198 Manual

Doepfer Ikke kategoriseret A-198

Læs gratis den danske manual til Doepfer A-198 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Doepfer A-198, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

doepfer System A - 100 Trautonium / Ribbon Controller A-198

1. Introduction

Module resp. A-198 is a so-called Trautonium Rib-

bon Controller. It provides variable Control Voltages

and Gate signals generated by combined position /

pressure sensor. The controlling element of the A-

198 is a linear position sensor (length about 50 cm)

that has available a pressure sensor too.

Touching the sensor with a finger generates a Con-

trol Voltage that is proportional to the position of

the finger. The Scale - i.e. the relation between

position difference and voltage difference - is ad-

justable with a potentiometer at the front panel. A

Hold switch is used to determine if the CV voltage is

held after removing the finger or if the voltage jumps to

0V. In the last case (Hold = off) a Gate signal is

derived from the CV voltage whenever a finger tou-

ches the sensor (e.g. for triggering an Envelope Gene-

rator / ADSR).

A pressure sensor made of conductive rubber arran-

ged below the position sensor generates a second

Control Voltage that increases with higher pressure

of the finger. Even for this CV the Scale is adjustable.

A second Gate signal is triggered as soon as the

pressure exceeds a certain value. The Gate Thres-

hold is adjustable at the front panel.

A-198

Trautonium / Ribbon Ctr.

Scale

Gate

Position

Scale

Gate

Pressure

Control

Board

Off

OnHold

Thres

A-198 Trautonium / Ribbon Controller System A - 100 doepfer

2. Overview Controls:

1 Scale : Scale / spread control for Position Con-

trol Voltage output !

2 Hold : Hold function switch

3 LED : Gate signal indicator for Position Gate at

output " (active only if Hold = off)

4 Thres : Threshold control for Pressure Gate si-

gnal at output $

5 LED : Gate signal indicator for Pressure Gate at

output $

6 Scale : Scale / spread control for Pressure Con-

trol Voltage output §

In / Outputs:

! CV : Position Control Voltage output

" Gate : Position Gate output (active only if Hold =

off)

§ CV : Pressure Control Voltage output

$ Gate : Pressure Gate output

% Contr. Board: Connector for manual (USB type)

A Do not connect USB devices to this socket!

Produkt Specifikationer

Mærke:	Doepfer
Kategori:	Ikke kategoriseret
Model:	A-198

Har du brug for hjælp?

Hvis du har brug for hjælp til Doepfer A-198 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Doepfer Manualer

Doepfer A-100 Manual

1 September 2024

Doepfer Dark Link Manual

21 August 2024

Doepfer A-196 Manual

20 August 2024

Doepfer A-134 Manual

20 August 2024

Doepfer A-135-2v Manual

19 August 2024

Doepfer A-145 Manual

19 August 2024

Doepfer A-101-2 Manual

19 August 2024

Doepfer A-99 Manual

19 August 2024

Doepfer A-103 Manual

19 August 2024

Doepfer A-165 Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ambient Weather WS-0265 Manual

18 September 2025

Emerson BAR322 Manual

18 September 2025

Ambient Weather EZ-29-24 Manual

18 September 2025

Newline TT-8624QPRO Manual

18 September 2025

Babysense Dreamer Manual

18 September 2025

Wesco 272755 Manual

18 September 2025

Newline TT-6523QA Manual

18 September 2025

Ambient Weather WS-8400 Manual

18 September 2025

Emerson ER100803 Manual

18 September 2025

Ambient Weather WS-YG501 Manual

18 September 2025