Doro Primo 366 Manual

Doro Mobiltelefon Primo 366

Læs gratis den danske manual til Doro Primo 366 (1 sider) i kategorien Mobiltelefon. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Doro Primo 366, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Tip: Some features require extra

memory, to expand your phone’s storage

capacity, install a micro SD card.

3. Micro-SD card

(optional)

Lightly press the

card holder and

push it carefully

toward SIM card

holder until it unlocks. The card holder

can now be ipped up vertically. Place

the memory card in the plastic bracket.

Make sure that the memory card

contacts face down and that the card is

placed in formed area area. Do not

scratch or bend the card contacts.

Push the metal holder back down,

press it at and slide it until it snaps

into place.

1. Left soft key Press to open main

2. Right soft key Press to open phone-

book

3. Call key Make and answer

calls;

Press once to open

Call log

4. End key Press to end a call;

press to return to

standby;

press and hold to turn

the

phone on and off

5. Speed

dial/Quick

functions

keys

M1 and M2 are speed

dial keys.

Camera and SMS key

for quick access

6. Arrow keys Press to open

shortcut functions;

press to open

messages;

scroll up and down in

menus and lists

7. Numerical

keys

Press to enter num-

bers;

long press key 1, to

call your voice mail-

box (phone number

must be stored);

when writing, press

to input numbers or

characters

8. * key Press to enter

“*”/ “+” / “P”/“W“;

when writing, press to

enter special charac-

ters

9. Charging cradle

10.

# key Long press to toggle

between Silent and

Normal mode

11. Cradle charging contacts

12. Micro-USB

port

For charger

13. Headset

socket

For 3.5 mm standard

headset

14. Torch LED

15. Camera lens

16. Loudspeaker

17. Assistance key

18. Torch key Switch torch on and

off

19. Keypad lock lock/unlock

20. + and - keys Adjust ring volume

and loudspeaker

volume

21. LEDs Blue = battery full;

Red = battery charg-

ing

Install the SIM card and the battery

The SIM card holder is located inside the

battery compartment.

CAUTION

Only use batteries, charger and

accessories that have been approved for

use with this particular model. Connecting

other accessories may be dangerous and

may invalidate the phone’s type approval

and guarantee.

1. Remove the cover

Slide your

ngernail into the

small notch on the

bottom side of the

phone and pull

the cover upward.

If the battery is installed, slide your

ngernail in the notch below the

Assistance key to lift it up.

2. Insert the SIM card

(required)

Insert the SIM

card by carefully

slide it under the

metal bracket.

Make sure the contacts on the SIM

card face down and the cut off corner

is positioned according to the gure.

Do not scratch or bend the card

contacts. Try not to touch the contacts

with your ngers.

English

QSG_Primo_by_Doro_366_en_A3(A7)_v1.1

English

Version 1.1 0359

Specications

Network: GSM 900/1800/1900

(Triband) MHz

Dimensions: 119 mm x 56 mm x 12 mm

Weight: 88 g

Battery: 3.7V/1000 mAh Li-ion

battery

Operating ambient

temperature:

Min: 0°C (32°F)

Max: 40°C (104°F)

Charging ambient

temperature:

Min: 0°C (32°F)

Max: 40°C (104°F)

Storage

temperature:

Min: -20°C (-4°F)

Max: 60°C (140°F)

Changes and errors excepted.

IMPORTANT!

Use only compatible memory cards

with this device. Compatible card type:

microSD, microSDHC.

Incompatible cards may damage the

card itself, the device and corrupt any

data stored on the card. Depending on

the market some phones may have a

pre-installed memory card.

4. Insert the battery

(required)

Push it into the

battery

compartment

ensure that the

three contacts on the battery touches

the three spring contacts in the battery

compartment.

5. Replace the cover and press it all the

way around to make sure it is closed

When battery performance is low, the

empty battery symbol ashes. To recharge

the battery, connect the mains adapter to

the micro USB connector on the bottom

side of the phone. Alternatively you can

place the telephone in the charge cradle

connected to the mains adapter via the

USB cable.

During charge, the red charge LED is on.

The battery charge icon moves during

charge (visible in the upper right corner

of the display). It takes approximately 3

hours to fully charge the battery. When fully

charged the charge icon stops moving.

Power on the phone

Press and hold the red key on the

phone at least 2 sec. to turn it on and off.

If the SIM card is valid and protected with a

PIN code (Personal Identication Number),

Enter PIN

is displayed.

Enter the SIM PIN code and press

( upper left corner of keypad). Delete

with

Delete

( upper right corner of

keypad).

Set the language

By default the phone’s menu language

is determined by the SIM card. You can

always switch between the languages

supported by the phone.

1. Press

Settings

2. Select

Phone settings

3. Select

Language

4. Select language from the list â

Answer a call

1. Press or

Answer

to accept the call

or press

Reject

to reject the call (busy

signal).

Alternatively, you can press to

reject the call directly.

2. Press to end the call.

Create phonebook entry

1. Press

Phonebook

2. Select

Add new contact

Add

3. Select whether you want to save the

contact on the SIM card or in the phone.

4. Enter a name for the contact.

5. Press .

6. Enter the phone number including the

area code.

7. Press .

8. Then press

Options

Save

Tip: For international calls, always enter

a symbol before the country code to be +

able to use the phonebook optimally in

any country.

Press the * key twice to enter the inter-

national area code .+

Speed dial (M1, M2)

Note!

The contacts for the speed dial keys

must already be stored in the Phonebook.

M1 and M2 setup

1. Press

Contacts

2. Select a contact for

keys.

3. Press

Options

Speed dial

4. Select the line

Save

5. Conrm the

Save?

with

Yes

Set time and date

1. Press

Settings

2. Select

Phone settings

3. Select

Time and date

4. Select

Set time/date

5. Enter the time (HH:MM) .â

6. Enter the date (DD.MM.YYYY) .â

7. Use * and # to select

Daylight saving

Off

Save

Make a call

1. Enter the phone number with the area

code. You can delete digits with

Clear

2. Press to dial. Press

Abort

cancel the call.

3. Press to end the call.

Tip: For international calls, always enter

a symbol before the country code to be +

able to use the phonebook optimally in

any country.

Press the * key twice to enter the inter-

national area code .+

SOS calls

As long as the phone is switched on, it is

always possible to place an SOS call by

entering the main local emergency number

for your present location followed by .

Some networks accept calls to emergency

numbers without a valid SIM card. Contact

your service provider for more information.

Note! Credit is NOT required - but the SIM

card must be registered and activated.

Emergency numbers are only intended

for urgent assistance, and should only

be called in an emergency. Please do

not misuse the emergency number as

this may prevent someone with a real

emergency from getting through.

Volume control

You can adjust the volume during a call

using the side keys

+/-

.The volume level is

shown on the display.

Enter text

Select character

• Press a numerical key repeatedly until

the desired character is shown.

• Wait a few seconds (until the blue or

yellow background of the character has

disappeared) before entering the next

character.

Special characters

• Press * to view a list of special

characters.

• Select the desired character with * or #

(to move left and right) and press

enter.

Move the cursor within text

• Use the keys

to move the

cursor within the text.

Upper case, lower case and numerals

• Press # to choose the input mode.

The symbol at the top left in the display

indicates the input mode.

Primo™ 366

Instructions

Produkt Specifikationer

Mærke:	Doro
Kategori:	Mobiltelefon
Model:	Primo 366

Har du brug for hjælp?

Hvis du har brug for hjælp til Doro Primo 366 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mobiltelefon Doro Manualer

Doro PhoneEasy 740 Manual

8 August 2024

Doro PhoneEasy 615 GSM Manual

20 Juli 2024

Doro Claria Manual

19 Juli 2024

Doro PhoneEasy 620 Manual

19 Juli 2024

Doro PhoneEasy 520 Manual

10 Juli 2024

Doro 1380 Manual

26 April 2024

Doro PhoneEasy 515 Manual

26 Februar 2023

Doro PhoneEasy 605 Manual

9 December 2022

Doro Primo 366 Manual

5 December 2022

Doro HandlePlus 324gsm Manual

1 December 2022

Mobiltelefon Manualer

Nyeste Mobiltelefon Manualer

Asus MyPal A730 Manual

4 November 2025

NGM Tango 1 Manual

19 Oktober 2025

NGM Pico Manual

19 Oktober 2025

NGM Prestige Manual

19 Oktober 2025

ZTE Blade A3 Joy Manual

19 Oktober 2025

ZTE S512 Manual

18 Oktober 2025

ZTE Z957 Manual

18 Oktober 2025

ZTE Chorus Cricket Manual

18 Oktober 2025

ZTE Vodafone 520 Manual

18 Oktober 2025

ZTE Blade L9 Manual

18 Oktober 2025