Draper 09443 Manual
Draper
Ikke kategoriseret
09443
Læs nedenfor 📖 manual på dansk for Draper 09443 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 3 brugere
Side 1/4
09443
EN
Original Instructions
Version 1
June 2024
16 PIECE
PNEUMATIC
WIND BACK KIT
User Manual for: Pneumatic Wind Back Kit
Stock No: 09443
Part No: PWBK-16
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
1. Intended Use
This air-powered wind-back kit is designed to adjust the pistons
on front and back braking systems when servicing braking
systems or replacing brake pads. The tool is suitable for
operating left and right threaded pistons, and the magnetic tip
will hold adapters in place. The kit has 15 adapters suitable for
servicing most car types.
Any other application beyond the conditions established for use
will be considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
This product is suitable for use by enthusiasts and
tradespersons alike.
2. Specication
Stock No. 09443
Part No. PWBK-16
Working air pressure: 5-8bar
Net weight: 3.2kg
3. Health and Safety Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result in
injury or damage to the user, the product or the vehicle.
WARNING! Ensure Health and Safety, local authority
and general workshop practice regulations are
adhered to when using tools and equipment.
• ALWAYS follow the vehicle manufacturer’s
instructions, warnings and service procedures.
• This tool should only be used by qualied trained
personnel.
• Ensure the correct air pressure is maintained and DO
NOT exceed the maximum specied of 8 bars.
• Keep this tool in good working order and condition.
DO NOT operate if any parts are damaged or missing
as this may cause failure and/or personal injury.
• DO NOT use the kit to perform a task for which it is not
designed.
• ALWAYS wear suitable eye and hand protection.
4. Identication
1. Piston rotation lever
2. Air pressure trigger
3. Lever release button
4. Push spindle
5. Magnetic adaptor holder
6. 15 Brake piston winder adaptors (Refer to chart Section 5)
7. Storage box
8. Air supply connector (1/4” BSP)
4.1 Packaging
Keep the product packaging for the duration of the
warranty period in case the product needs to be returned
for repair.
WARNING! Keep packaging materials out of reach
of children. Dispose of packaging correctly and
responsibly and in accordance with local
regulations.
Please visit for our full range of drapertools.com
accessories and consumables.
Preface
– 2 –
(4)
(7)
(5)(3)
(6)
(1)
(2)
(8)
Produkt Specifikationer
| Mærke: | Draper |
| Kategori: | Ikke kategoriseret |
| Model: | 09443 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Draper 09443 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Draper Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
Ikke kategoriseret Manualer
- Ikke kategoriseret Honeywell
- Ikke kategoriseret ClimeMET
- Ikke kategoriseret Silva
- Ikke kategoriseret Vanson
- Ikke kategoriseret FSP/Fortron
- Ikke kategoriseret Ebro
- Ikke kategoriseret Mitsubishi
- Ikke kategoriseret Alba
- Ikke kategoriseret Pelgrim
- Ikke kategoriseret Asetek
- Ikke kategoriseret Xiaomi
- Ikke kategoriseret Technical Pro
- Ikke kategoriseret Axxent
- Ikke kategoriseret Palson
- Ikke kategoriseret Medion
Nyeste Ikke kategoriseret Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025