Draper 13198 Manual


Læs nedenfor 📖 manual på dansk for Draper 13198 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 3 brugere

Side 1/4
13198
EN
Original Instructions
Version 3
Augist 2024
UNDERBODY
COATING
GUN
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
1. Intended Use
Part of our core range, this product is suitable for
enthusiasts and tradespersons alike. This vehicle
underbody coating gun can be used on the vehicle
chassis for rustproong and is suitable for various kinds
of primer and sub coat paints. It accepts most types of 1L
coating tins and it is supplied with a ¼ BSP adaptor.
2. Specication
Stock No: 13198
Part No: DAT-GUCG
Air inlet: 1/4 BSP
Rated air pressure: 30~58 psi
Maximum air pressure: 116 psi
Air consumption: 270 L/min
Recommended air pressure: 2 4 bar
Nett weight: 290g
4. Warranty
12 months Warranty -
Visit for full details.drapertools.com/warranty
5. HealthandSafety
Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result in
injury or damage to the user or the product.
Compressed air is a source of considerable energy. When
handling products dealing with compressed air, the
following precautions must be taken to prevent
accidents.
5.1GeneralSafetyInstructionsFor
CompressedAir
• Ensure that compressed air is not blocked or in
contact with any part of your body.
• Before connecting any pneumatic equipment to the
compressed air supply, all mounted ttings, piping
assemblies and electrical connections should be
checked for security. All plastic plugs in the
equipment used for protection during shipping should
be removed.
• No piping alterations, removal of ttings, repairing of
equipment etc. Should be attempted with air supplies
connected. Air and electrical supplies must be
disconnected before beginning any adjustment,
maintenance or dismantling of equipment.
• The maximum allowable operating pressures,
temperature, ows etc. must be strictly observed.
Failure to do so might result in catastrophic failure of
equipment, and result in serious personal injury and /
or death. Refer to individual catalogues for this
information, and any other operating or application
limitations.
5.2 CompressedAirSafetyfor
PneumaticEquipment
WARNING!
Compatibility of pneumatic equipment
Ensuring the compatibility of the procured FRL
equipment is the responsibility of the person who
designs the Pneumatic system and/ or System
specications. This should be based on specications or
after analysis and / or tests to meet specic
requirements.
Repair & Maintenance
Assembly, handling, or repair of pneumatic systems
should be performed by only trained and experienced
operators.
Safety First
Do not service machinery / equipment or attempt to
remove any component until safety Is conrmed.
Inspection and maintenance of machinery /
equipment should only be performed after
conrmation that both compressed air and
electrical supply have been positively
disconnected and all residual compressed air in
2


Produkt Specifikationer

Mærke: Draper
Kategori: Ikke kategoriseret
Model: 13198

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper 13198 stil et spørgsmål nedenfor, og andre brugere vil svare dig