Draper 21006 Manual


Læs gratis den danske manual til Draper 21006 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Draper 21006, eller vil du spørge andre brugere om produktet?

Side 1/1
Stock No.
20098, 20100, 20104, 20106
21260, 21278, 21262
Installing 6 Drawer /
5 Drawer / 13 Drawer
Roller Cabinet
STEP 1: ATTACH CABINET HANDLE
Position the cabinet handle over the
Attach with (4) M6 x 15mm bolts and
tighten with supplied hex key.
Note: the cabinet handle should be mounted on the
same side as the swivel castors with brake.
REMOVING AND REPLACING THE
DRAWERS:
Pull the drawer completely out.
Press down on the left tab and lift up the right tab.
Pulldrawerosliders.
To reinstall the drawer, realign with the internal
slider and push in until locked in place.
CASTOR MAINTENANCE
Grease the castors annually using high quality
bearing grease
CARE AND CLEANING
Periodically the surfaces should be cleaned with
a mild detergent and water. Grease and oil can be
removedwithmoststandardcleaninguids.For
safetyuseanon-ammablecleaninguid.
Autowaxwillpreservetheunit’slustrenishand
protects against scratches.
STEP 2: ATTACH CASTORS
Be sure the drawers are locked and place the cabinet
upside down.
Secure castors to the unit using the (4) M8 x 25mm
bolts and spring washers and
tighten with supplied
hex key.
Repeat this process on
the opposite of
the cabinet.
To make assembly easier we recommend having two
persons aid one another in assembly.
drapertools.com
DraperToolsLimited,HursleyRoad,Chandler’sFord,Eastleigh,Hampshire.SO531YFUK.


Produkt Specifikationer

Mærke: Draper
Kategori: Ikke kategoriseret
Model: 21006

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper 21006 stil et spørgsmål nedenfor, og andre brugere vil svare dig