Draper 30883 Manual

Draper Ikke kategoriseret 30883

Læs gratis den danske manual til Draper 30883 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Draper 30883, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Original Instructions

Version 1 – August 2025

30883

6 TONNE

RATCHETING

AXLE

STANDS

Read this manual in full before using this product and

retain it for future use. Always use the latest version of

the manual. Please visit drapertools.com/manuals for

the latest version.

1. Intended Use

These axle stands, feature ratchet adjustment which

prevents accidental release of the load - the more weight

applied, the tighter the post is locked. Sold in pairs.

Any other application beyond the conditions established

for use will be considered misuse. Draper Tools accepts

no responsibility for improper use of this product.

2. Specication

Stock No. 30883

Part No. AS6000R

Maximum safe working load (per stand) 6000kg

Maximum safe working load (per pair) 12000kg

Maximum height (approx.) 630mm

Minimum height (approx.) 400mm

Saddle dimension 29 x 107mm

3. Health and Safety Information

Important: Read all the Health and Safety instructions

before attempting to operate, maintain or repair this

product. Failure to follow these instructions may result in

injury or damage to the user, the product or the vehicle.

WARNING!

− DO NOT OVERLOAD AXLE STANDS BEYOND

RATED CAPACITY. OVERLOADING CAN

CAUSE DAMAGE TO, OR FAILURE OF,

THE AXLE STANDS.

− Position load on centre of saddle only.

− ALWAYS USE STANDS IN PAIRS on hard level

surface e.g. concrete, capable of sustaining the

load. Use of stands on other than hard level

surfaces can result in load instability and possible

loss of load.

• Use only as specied by the manufacturer.

• ALWAYS use in pairs on the same axle and at the

same height.

• DO NOT use stands simultaneously to support both

ends or one side of the vehicle.

• DO NOT exceed the maximum capacity marked on

each axle stand.

• Upper and lower columns are to be used only as

pair provided.

• Secure wheels with chocks in contact with ground.

Apply the vehicle’s handbrake (for automatics put

in ‘Park’).

• Ensure each stand is securely located.

• Exercise extra care when using with a three wheeled

vehicle or trailer.

• DO NOT modify or make any alterations to the stands.

DANGER! Take extremely caution to ensure

the vehicle or other load is slowly and

carefully lowered onto the centre of each axle

stand saddle.

• Ensure that each stand is securely located under a

strong point on the vehicle; consult the vehicle

manufacturer’s handbook for guidance.

• Ensure that height adjust locking mechanism is fully

located before applying any load to the axle stand.

• Check that the axles and vehicle are stable and

correctly supported and cannot move before

commencing any work.

• Inspect the axle stands before each use. DO NOT use

if they show signs of damage or if they may have

been overloaded.

• Replace any warning or instruction labels on the axle

stand should they become illegible.

• DO NOT use axle stands on the highway, or anywhere

else if it is deemed to be unsafe.

• DO NOT push or twist the vehicle/load whilst it is

supported on stands.

• DO NOT allow children or animals in the vicinity of a

vehicle supported on axle stands.

• DO NOT leave a vehicle on axle stands in an area that

could be considered a hazard to others or property.

• Ensure a minimum clearance of 25mm between

the bottom of the column and its lowest setting and

the ground.

Produkt Specifikationer

Mærke:	Draper
Kategori:	Ikke kategoriseret
Model:	30883

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper 30883 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Draper Manualer

27 September 2025

25 September 2025

25 September 2025

24 September 2025

Draper Expert 27118 Manual

24 September 2025

Draper 16851 Manual

24 September 2025

Draper 30881 Manual

24 September 2025

Draper 60990 Manual

24 September 2025

Draper Expert 21721 Manual

24 September 2025

Draper 17993 Manual

23 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech VEGA-320 Manual

27 September 2025

Sanus VisionMount LMT15 Manual

27 September 2025

Advantech PCE-7B19-0GA1 Manual

27 September 2025

Advantech PPC-417 EHL Manual

27 September 2025

Yato YT-73631 Manual

27 September 2025

Advantech MIC-711-ON Manual

27 September 2025

Yato YT-73832 Manual

27 September 2025

Advantech ASR-A502 Manual

27 September 2025

Graco TC Pro PLUS Cordless 17N223 Manual

27 September 2025

Yato YT-7367 Manual

27 September 2025