Draper 34279 Manual

Draper Ikke kategoriseret 34279

Læs nedenfor 📖 manual på dansk for Draper 34279 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.3 stjerner i gennemsnit af 3 brugere

Download PDF

Side 1/2

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0624

13AMP

SOCKET TESTER

34279 – INSTRUCTIONS FOR USE

2. Specication

Stock No. 34279

Part No. ST-2

Rated Voltage: 230V

Rated Frequency: 50Hz

Test Time: 60 – 90seconds

Working Temperature: 0 - 40°C

Relative Humidity: <80%

Dimensions: 71 X 62 X 62mm

Net Weight: 63g

1. Product Introduction

1.1 Intended Use

This product is designed to test and nd electrical faults on 13A sockets.

A combination of the three indicator lights and the coding chart provided will

show the condition of the socket wiring. Any other application beyond the

conditions established for use will be considered misuse. Draper Tools accepts

no responsibility for improper use of this product.

Original Instructions

Version 2 – June 2024

3. Health and Safety Information

Important: Read all the Health and Safety instructions before attempting to

operate, maintain or repair this product. Failure to follow these instructions may

result in injury or damage to the user, the product or the socket.

WARNING!

• The tester provides an instant reading of the socket wiring. DO NOT LEAVE

INSERTED INTO THE LIVE MAINS SOCKET FOR LONGER THAN THE

MAXIMUM TEST TIME OF 90SECONDS.

• To prevent electric shocks:

– Use the correct safety measures when working with voltages above 32V

RMS, 42V AC peak or 60V DC.

– DO NOT touch any conductors with hands or skin.

• If a plug adapter must be used to test a socket or a lead connection, ensure

that it is in perfect condition especially the protective conductor connection

to avoid faulty test results.

• Check the tester before each use and use if any damage, broken or DO NOT

cracked parts.

• Before use check the tester with a known voltage source to verify it is in

perfect working order.

• The tester must only be used under the conditions and for the purpose it has

been designed for.

• DO NOT use tester if wet or damaged in any way. Keep it dry and free from dust.

• The tester cannot detect between Neutral/Earth reverse.

Read this manual in full before using this product and retain it for future use. Always use the latest version of the manual.

Please visit drapertools.com/manuals for the latest version.

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0624

4. Identication and Unpacking

4.1 Product Overview – Fig.1

1. Indicator light

2. Indicator light

3. Indicator light

4. Coding chart

Fig. 1

(1)

(2)

(4)

(3)