Draper 44005 Manual

Draper Ikke kategoriseret 44005

Læs gratis den danske manual til Draper 44005 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Draper 44005, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

3. What’s in the Box?

FOLDING

PLATFORM

TROLLEY

44005 – FRT ASSEMBLY INSTRUCTIONS

Read this manual in full before using this product and retain it for future use.

Always use the latest version of the manual. For the latest version of this

manual please visit drapertools.com/manuals

1. Specication

Stock No. 44005

Part No. FRT

Max. static load: 150kg

Max. dynamic load: 100kg approx.

Wheel diameter: 100mm

Dimensions: L 725 x W 475 x H 830mmm

Folded body height: 220mm

Net weight: 7kg

2. Health and Safety Information

Important: Read these instructions before attempting to assemble, use or

maintain this product. Failure to follow may result in injury or damage to the

user, the product or the load.

• Keep your work area well lit, with bystanders at a safe distance.

• Assemble this product only in the manner depicted and do not modify the

product in any way.

Original Instructions

Version 1 - May 2024

• Before every use, inspect the trolley for broken or cracked parts and

loose xtures.

• Only use this product on rm, level surfaces capable of supporting both

the trolley and its load.

− DO NOT use this product on sloped or slippery surfaces.

− Where available, use ramps to mount kerbs and other raised edges.

• DO NOT ride on or allow others to ride on this product.

• DO NOT exceed the maximum rated capacities of this product.

• When in use, ensure that the load is distributed evenly and that the trolley

is not overbalanced.

− Be mindful of changes to the weight distribution when loading

and unloading.

• ALWAYS ensure that the heaviest part of the load is at against the

trolley platform.

• Ensure that the load is stable and secure before transporting it.

• Manoeuvre the product using the handle ONLY and maintain full control

of the trolley at all times.

− This product is intended to be pushed; only pull if

absolutely necessary.

• Plan your route and ensure that the castors are not obstructed before

moving the trolley.

• DO NOT leave the trolley unattended while under load.

(C)(B)

(D)

(A)

(E)

A. 1 x Trolley platform

B. 2 x Swivel castors

C. 2 x Fixed castors

D. 16 x M8 x 10mm hex bolts

E. 16 x M8 spring washers

Carefully remove the product from the packaging and examine it for any

signs of damage that may have occurred during shipment.

Before assembling the product, lay the contents out and check them against

the parts shown below. If any part is damaged or missing, do not attempt to

use the product. Please contact the Draper Helpline; contact details can be

found at the back of this manual.

Please visit drapertools.com for our full range of accessories

and consumables.

Keep the product packaging for the duration of the warranty period in

case the product needs to be returned for repair.

WARNING! Keep packaging materials out of reach of children.

Dispose of packaging correctly and responsibly and in accordance

with local regulations.

WARNING! DO NOT use this product if any parts are damaged.

Tighten, replace or repair all aected parts before use.

4. Assembly Instructions

Important: Before assembling this product, read and understand all the

safety instructions listed in this manual. Screw all bolts nger-tight and

tighten when assembly is complete.

1. Position the trolley platform (A) upside down with the folded handle

against the oor.

2. Use the M8 x 10mm hex bolts (D) and M8 spring washers (E) to attach the

swivel castors (B) to the back of the trolley platform (where the handle is

attached) and the xed castors (C) to the front end.

3. Tighten all bolts, then turn the trolley over onto the castors and open the

trolley handle.

Important: To prevent warping of the wheels, the swivel castors be MUST

installed at the back of the trolley (beneath the handle).

5. Opening and Folding the Handle

To open or fold the handle, press down on the locking bar with your foot and

manoeuvre the handle to the desired position. Carefully release the locking

bar when the desired position has been reached.

Important: The handle is not locked in position when folded away. Take care

when transporting the trolley as the handle may swing open and cause injury.

6. Maintenance and Disposal

• Periodically check that all bolts are tightly secured and lubricate all

moving parts.

• Store this product in a clean and dry environment, out of direct sunlight

and out of reach of children.

• At the end of its working life, dispose of the product responsibly and in line

with local regulations.

• Recycle where possible.

7. Warranty

Should the tool develop a fault, return the complete tool to your

nearest distributor or contact Draper Tools directly. Proof of purchase

must be provided.

If, upon inspection, it is found that the fault occurring is due to defective

materials or workmanship, repairs will be carried out free of charge.

This warranty covers parts and labour for 12 months from the date of

purchase. However, if the tools are hired out, the warranty period is

90 days from the date of purchase.

This warranty does not apply to any consumable parts, batteries or normal

wear and tear, nor does it cover any damage caused by misuse, careless or

unsafe handling, alterations, accidents, or repairs attempted or made by

any personnel other than the authorised Draper Tools repair agent.

For full details, visit drapertools.com/warranty

8. Explanation of Symbols

Read the instruction manual

Overall body length

Overall body width

Overall body height

Folded body height

Max. capacity on level ground

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Delta International, Delta International BV, Oude Graaf 8, 6002 NL, Weert, Netherlands

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0524

Fig.1

(A)

(D)

(E)

(C)

(B)

725mm

475mm

830mm

220mm