Draper 85634 Manual


Læs gratis den danske manual til Draper 85634 (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Draper 85634, eller vil du spørge andre brugere om produktet?

Side 1/11
85634
EN
STEEL MESH
CART
Original Instructions
Version 3 August 2024
2
For the latest version of this manual, please visit
1. Intended Use
This product is designed to transport and move loads
of up to 450kg and is particularly suited to garden
materials. Any other application beyond the conditions
established for use will be considered misuse. Draper
Tools accepts no responsibility for improper use
2. Specication
Stock No. 85634
Part No. GMC/450
Max. load 450kg
Cage capacity 200L
Max. tyre pressure 2.1bar (30psi)
Dimensions
Cage L 1,220 x W 610 x H 274mm
Full L 1,370 x W 630 x H 1,050mm
Net weight 26.6kg
3. Health and Safety Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result
in injury or damage to the user or product.
• Observe all standard Health and Safety precautions
when using this cart in an outdoor environment.
• Before every use, inspect the cart for broken, cracked,
loose or corroded parts.
Important: DO NOT use this product if it is damaged
in any way. Contact Draper Tools to discuss repair and
replacement options.
• Wear protective footwear when using this product
under heavy loads.
• DO NOT sit, stand or ride on this cart at any time.
• DO NOT allow children to play with the cart.
•  exceed the maximum load specied.DO NOT
• Ensure that the tyres are suitably inated before use.
DO NOT exceed a tyre pressure of 2.1bar (30psi).
• Distribute the load evenly within the cage.
• Ensure that the load is safely contained within the
cage and unlikely to fall.
DO NOT load items onto the top edges of
the cage.
• Inspect the intended route and clear any obstructions
before moving the cart under load.
• Take care when moving the cart under load.
ALWAYS ensure that all parts are secured before
moving the cart.
DO NOT use the cart on uneven surfaces that
may cause it to tip over.
• The wheels of this product DO NOT lock.
Ensure that the cart will not roll once positioned
for use.
• Take particular care when using the cart on
sloped surfaces.
• Ensure that the handle is in an upright position
when not in use to avoid a trip hazard.
• ONLY use spare parts supplied by Draper Tools.
4. Identication and Unpacking
4.1 What’s in the Box?
Carefully remove the product from the packaging and
examine it for any signs of damage that may have
occurred during shipment.
Before assembling the product, lay the contents out
and check them against the parts and xings shown.
If any part is damaged or missing, do not attempt to
use the product. Please contact the Draper Helpline;
contact details can be found at the end of this manual.


Produkt Specifikationer

Mærke: Draper
Kategori: Ikke kategoriseret
Model: 85634

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper 85634 stil et spørgsmål nedenfor, og andre brugere vil svare dig