Draper Expert 23311 Manual

Draper Ikke kategoriseret Expert 23311

Læs gratis den danske manual til Draper Expert 23311 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Draper Expert 23311, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
BRAKE PIPE
FLARING
SLIDER KIT
23311 – BPF/PRO/SLIDER INSTRUCTIONS FOR USE
Read this manual in full before using this product and retain it for future use. Always use the latest version of
the manual. Please visit drapertools.com/manuals for the latest version.
1. Intended Use
This product is designed to are brake pipes of 3 ⁄ 16"
and 4.75mm according to SAE Convex, DIN Convex
and SAE Double standards. Any other application
beyond the conditions established for use will be
considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
Important: Ensure that you are familiar with the
various types of ares and their applications before
using this product. ALWAYS consult the vehicle
manufacturer’s instructions before use.
WARNING! Keep your hands clear of moving
parts, clamps and punches while using this
product and keep long hair and jewellery
tied back.
2. What’s in the Box?
EN
Original Instructions
Version 2 – January 2023
(E2)
(A)
(D) (C)
(E1)
(B)
A. 1 × Flaring tool assembly
B. 1 × Press lever
C. 1 × 3 ⁄ 16" (4.75mm) SAE punch slider
D. 1 × 4.75mm DIN punch slider
E. 1 × 3 ⁄ 16" combi die
E1. 3 ⁄ 16" (4.75mm) SAE die
E2. 4.75mm DIN die
3. Operating Instructions
1. Clamp the base of the tool into a suitable
bench-mounted vice and screw the press lever
(B) into the lever socket (1).
2. Fully loosen the die clamp lever (2) and swing
the die clamp (3) open.
1 Fig.
(2) (3)
(4)
(1)
(B)
3. Use 6. Flaring Reference Chart to determine the
correct die and punches for the required are.
4. Clean the die of grease and place the two parts
horizontally into the die socket (4) with the
required mould directed towards the slider
mount (5).
2 Fig.
(E) (5)
(6)
(6)
(E)
Important: Ensure that both parts of the die are
in contact with the die stops (6).

Produkt Specifikationer

Mærke: Draper
Kategori: Ikke kategoriseret
Model: Expert 23311

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper Expert 23311 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Draper Manualer

Draper

Draper Expert 58140 Manual

9 December 2025
Draper

Draper 29358 Manual

9 December 2025
Draper

Draper Expert 75170 Manual

5 December 2025
Draper

Draper 34570 Manual

4 December 2025
Draper

Draper 34964 Manual

3 December 2025
Draper

Draper Expert 58138 Manual

3 December 2025
Draper

Draper 78641 Manual

3 December 2025
Draper

Draper 78639 Manual

2 December 2025
Draper

Draper 29098 Manual

3 Oktober 2025
Draper

Draper Expert 31318 Manual

3 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterstone

Waterstone 7800 Manual

11 December 2025
Kwikset

Kwikset 258 Manual

11 December 2025
Schlage

Schlage F170 Manual

11 December 2025
Moen

Moen Align 7565EV Manual

11 December 2025
Energy Sistem

Energy Sistem ESG M3 Neon Manual

11 December 2025
ALNO

ALNO MC10244 Manual

11 December 2025
JET

JET TAK-ZX Manual

11 December 2025
Crosley

Crosley Nashville CF1165 Manual

11 December 2025
Waterstone

Waterstone 1455 Manual

11 December 2025
Laica

Laica NE2015 Manual

11 December 2025