Draper Expert 23312 Manual

Draper Ikke kategoriseret Expert 23312

Læs gratis den danske manual til Draper Expert 23312 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Draper Expert 23312, eller vil du spørge andre brugere om produktet?

Side 1/2

HAND HELD

BRAKE PIPE

FLARING TOOL

3 ⁄ 16" SAE

23312 – BPF/HAND/SAE INSTRUCTIONS FOR USE

EN

Original Instructions

Version 1 – December 2023

Read this manual in full before using this product and retain it for future use. Always use the latest version of the manual.

Please visit drapertools.com/manuals for the latest version.

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0123

1. Intended Use

This product is designed to are brake pipes of 3 ⁄ 16" and

4.75mm according to SAE Convex and SAE Double

standards. Any other application beyond the conditions

established for use will be considered misuse. Draper Tools

accepts no responsibility for improper use of this product.

Important: Ensure that you are familiar with the various

types of ares and their applications before using this

product. ALWAYS consult the vehicle manufacturer’s

instructions before use.

2. What’s in the Box?

Before assembling the product, lay the contents out and

check them against the parts listed below.

If any part is damaged or missing, do not attempt to use the

product; please contact the Draper Helpline.

A. 1 × Flaring tool

A1. Die

A2. Locking screws

B. 1 × Double-ended 3 ⁄ 16" punch

C. 1 × Stop punch

D. 1 × Punch grease

3. Operating Instructions

1. Partly screw the stop punch (C) into the aring tool so

that the nut is no more than 5mm from the die (A1).

1 Fig.

(C)

(A1)

2. Ensure that the tube nut is installed onto the brake pipe,

then insert the brake pipe into the open end of the die

and hand-tighten the locking screws (A2) just enough to

grip the pipe.

2 Fig.

(A2)

Important: DO NOT over tighten the locking screws at

this stage as the stop punch may damage the pipe.

(A)

(D)

(C)

(A1)

(A2)

(B)

Produkt Specifikationer

Mærke:	Draper
Kategori:	Ikke kategoriseret
Model:	Expert 23312

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper Expert 23312 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Draper Manualer

Draper Expert 58140 Manual

9 December 2025

Draper 29358 Manual

9 December 2025

Draper Expert 75170 Manual

5 December 2025

Draper 34570 Manual

4 December 2025

Draper 34964 Manual

3 December 2025

Draper Expert 58138 Manual

3 December 2025

Draper 78641 Manual

3 December 2025

Draper 78639 Manual

2 December 2025

Draper 29098 Manual

3 Oktober 2025

Draper Expert 31318 Manual

3 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterstone 7800 Manual

11 December 2025

Kwikset 258 Manual

11 December 2025

Schlage F170 Manual

11 December 2025

Moen Align 7565EV Manual

11 December 2025

Energy Sistem ESG M3 Neon Manual

11 December 2025

ALNO MC10244 Manual

11 December 2025

JET TAK-ZX Manual

11 December 2025

Crosley Nashville CF1165 Manual

11 December 2025

Waterstone 1455 Manual

11 December 2025

Laica NE2015 Manual

11 December 2025