Draper Expert 60981 Manual

Draper Ikke kategoriseret Expert 60981

Læs gratis den danske manual til Draper Expert 60981 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Draper Expert 60981, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

60981

Original Instructions

Version 2 – February 2023

COIL SPRING

COMPRESSOR

KIT

Read this manual in full before using this

product and retain it for future use.

Always use the latest version of the manual.

Please visit drapertools.com/manuals

for the latest version.

1. Intended Use

This product is designed to compress and

expand automotive strut springs found in

vehicles from a range of manufacturers

and is suitable for use on both MacPherson

Strut coil springs and conical springs.

It is intended for frequent trade use,

with the quality and features to meet

and exceed expectations of the

most demanding user.

Important: ALWAYS consult the

vehicle manufacturer’s information

to determine the correct procedure

specic to each vehicle.

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF Website: drapertools.com E -mail: sales@drapertools.com

2. Specication

Stock No. 60981

Part No. N1000B

Gold jaws:

Range: Ø 80–115mm

Inner diameter: 65mm

Outer diameter: 125mm

Weight (pair) 1.45kg*

Black Jaws:

Range: Ø 105–140mm

Inner diameter: 88mm

Outer diameter: 160mm

Weight (pair) 2.2kg*

Silver jaws:

Range: Ø 145–190mm

Inner diameter: 126mm

Outer diameter: 212mm

Weight (pair) 2.3kg*

Main body:

Max. load: 1,250kg

Max. jaw opening: 300mm ±5mm (approx.)

Drive: 21mm

Weight: 5.17kg*

*All weights are approximate and may vary between

individual items

3. Health and Safety

Information

Important: Read these instructions before attempting to

use or maintain this product. Non-compliance may result

in injury or damage to the user, the product or the load.

• DO NOT allow anyone who is unfamiliar with this

product or unqualied in its use to operate this device.

• Observe all standard safety precautions and good

practices when working with vehicles and

compression devices.

• ALWAYS read this document in conjunction with the

vehicle manufacturer’s information.

• Keep your work area well lit, with bystanders at a

safe distance.

• Do not modify the product in any way and use spare

parts supplied by Draper Tools ONLY.

• Before every use, inspect the product for broken parts,

cracks and loose xtures.

WARNING! DO NOT use this product if it is

damaged in any way or its structural integrity

is compromised. Replace or repair all aected

parts before use.

• Wear appropriate personal protective

equipment, including eye or face protection and

protective gloves.

• ALWAYS ensure that the chosen jaws are suitable for

the spring type and size.

− The spring must rest securely between the outer

rib and safety ridges of the jaws.

− Ensure that the spring cannot slide out of the jaw

plates once they are installed.

• Keep your hands and other body parts clear of the

spring as it is being compressed or released.

− DO NOT wear loose clothing or jewellery and keep

long hair tied back.

• DO NOT allow the spring windings to touch or the

compressor jaws to reach the minimum or maximum

limit of the tool’s compression range.

• The centre line of the spring MUST remain parallel to

the main body at all times, particularly when

compressing conical springs.

• Ensure that the jaw bolts remain rmly tightened

during use.

• DO NOT leave a compressed spring unattended.

• DO NOT replace the safety pin with a pin of a dierent

strength grade.

WARNING! Compressed springs contain

signicant amounts of potential energy.

Exercise extreme caution when working with or

handling compressed springs and observe the

load at all times.

WARNING! NEVER use any form of power tool or

air tool to rotate the hex drive as the increased

speed may cause the spring to burst from the

jaw pieces. Use ONLY a manual 21mm spanner.

Produkt Specifikationer

Mærke:	Draper
Kategori:	Ikke kategoriseret
Model:	Expert 60981

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper Expert 60981 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Draper Manualer

Draper Expert 19224 Manual

2 Oktober 2025

Draper Storm Force 65019 Manual

2 Oktober 2025

Draper 33321 Manual

2 Oktober 2025

Draper Expert 14214 Manual

2 Oktober 2025

Draper 37826 Manual

2 Oktober 2025

Draper 02935 Manual

2 Oktober 2025

Draper D20 08096 Manual

2 Oktober 2025

Draper Expert 15647 Manual

2 Oktober 2025

Draper 63877 Manual

2 Oktober 2025

Draper Expert 15328 Manual

2 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vestil HPRO-SS-36-42-4 Manual

2 Oktober 2025

VitalMaxx 01260 Manual

2 Oktober 2025

Vestil VAN-J-AC Manual

2 Oktober 2025

Vestil LPRO-92-9-4 Manual

2 Oktober 2025

Vollrath 7217810 Manual

2 Oktober 2025

Vestil AHSN-4-15-7-TLC Manual

2 Oktober 2025

VitalMaxx 06870 Manual

2 Oktober 2025

Advantech ARK-3532D Manual

2 Oktober 2025

Axxess AXFD-USB3 Manual

2 Oktober 2025

Structural Concepts Fusion GHS1056RLB Manual

2 Oktober 2025