DSC HS2ICN Manual

DSC Alarmsystem HS2ICN

Læs gratis den danske manual til DSC HS2ICN (40 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om DSC HS2ICN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

English, Français, Español, Português

WARNING: Refer to the PowerSeries Neo Reference manual for information on limitations regarding product use and function, and information on the limitations as to the liability of the manufacturer.

NOTE: These instructions must be used in conjunction with the system installation manual of the control panel with which this equipment is intended to be used. This installation sheet applies to the fol-

lowing models: HS2LED, HS2ICN, HS2ICNP, HS2ICNRFx, HS2ICNRFPx, HS2LCD, HS2LCDP, HS2LCDRFx and HS2LCDRFPx; x = 9 where the system operates in 912-919MHz, 8 where the

system operates in 868MHz band, and 4 where the system operates in 433MHz band. The Model HS2LED, HS2LCD(P), HS2ICN(P), HS2LCDRF(P)8, HS2ICNRF(P)8 keypads have been certified by

Telefication according to EN50131-1:2006 + A1:2009, EN50131-3:2009 for Grade 2, Class II.

HS2LED/HS2ICN(P)(RF)x/HS2LCD(RF)(P)x v1.0

Installation Instructions, Instructions d’Installation, Instrucciones de instalación,

Instruções de Instalação

The HS2LED/HS2ICN(P)(RF)x/HS2LCD(RF)(P)x keypads are

compatible with the PowerSeries Neo HS2016/32/64, HS2014-

4* and HS2128 panels. The RF keypads combine a wireless

transceiver with the respective HS2 keypad.

* Model not UL/ULC listed.

Specifications

* Zone not to be programmed as Fire type or 24h type.

NOTE: Keypads contain no serviceable parts.

NOTE: Only models operating in band 912-919MHz are UL/

ULC listed.

Unpack

The keypad package includes the following:

Mount

Mount the keypad where it is accessible to designated points of

entry and exit. Once a dry and secure location is selected, per-

form the following steps to mount the keypad.

Disassemble Keypad

1. Insert the tip of a flat-head screwdriver into the slots at the

bottom left and right of the keypad.

2. Gently pry open the faceplate. This will remove it and allow

access for mounting.

Mount and Wire Keypad

1. Secure keypad to wall using mounting holes. Use all four

screws provided unless mounting on a single gang box. Use

the plastic anchors supplied if the unit is to be mounted on

drywall.

2. If using the keypad tamper, secure the tamper plate to the

wall with a screw.

NOTE: For UL/ULC listed commercial burglary installations,

the use of the keypad tamper is mandatory.

3. Run wire through wiring slot or knockouts. Connect Corbus

and PGM/Zone wiring to keypad. Place tamper switch into

tamper hole on backplate.

4. Place keypad into backplate, ensuring the wire is pushed

back into the wall as much as possible. Route the wire inside

the keypad, ensuring high components are avoided. Snap the

front assembly closed, ensuring that there is no pressure to

the keypad from the wire below.

Installation Instructions

• Temperature range: -10°C to +55°C (14°F to 131°F); Tem-

perature range for UL/ULC: 0°C to +49°C (32°F to 120°F)

• Humidity (MAX): 93%R.H. non-condensing

• Plastic enclosure protection degree: IP30, IK04

• Voltage rating: 13.8VDC nominal (power provided by the

compatible control panel)

• Connects to control panel Corbus via 4 wires

• 1 configurable zone input or PGM output*

• HS2LED/ HS2ICN(P)/HS2LCD(P)/HS2ICNRF(P)/

HS2LCDRF(P) Current draw:55mA(min)/105mA(max)

• Wall-mount tamper

• 5 programmable function keys

• Ready (Green LED), Armed (Red LED), Trouble (Yellow

LED), AC (Green LED)

• Dimensions (L x W x D): 168mm x 122mm x 20 mm

• Weight: 260g

• Low temperature sensor

• Frequency: 433 MHz (HS2ICNRF4/HS2LCDRF4)

• 868 MHz (HS2ICNRF8/HS2LCDRF8)

• 912-919MHz (HS2ICNRF9/HS2LCDRF9)

• Up to 128 wireless zones

HS2LED/ICN(RF)/

LCD(RF) HS2ICN(RF)P/LCD(RF)P

• 1 keypad • 1 keypad

• 4 mounting screws • 4 mounting screws

• 2 end-of-line resistors • 2 end-of-line resistors

• Keypad inner door

labels

• Keypad inner door labels

• 1 tamper switch • 1 tamper switch

• Installation Instructions • Installation Instructions

• Mini Proximity (prox) tag

(MPT)

Table 1: Compatible Devices

Wireless PG smoke detector PGx926UL

Wireless PG smoke and heat detector PGx916UL

Wireless PG CO detector PGx913

Wireless PG PIR motion detector PGx904(P) UL

Wireless PG PIR + camera motion detector PGx934(P)UL

Wireless PG curtain motion detector PGx924UL

Wireless PG dual tech motion detector PGx984(P)

Wireless PG mirror motion detector PGx974(P) UL

Wireless PG outdoor motion detector PGx994UL

Wireless PG glass break detector PGx912

Wireless PG shock detector PGx935UL

Wireless PG flood detector PGx985UL

Wireless PG temperature detector (indoor) PGx905UL

Outdoor temperature probe (requires PGx905) PGTEMP-

PROBE

Wireless PG key PGx939UL

Wireless PG key PGx929UL

Wireless PG panic key PGx938UL

Wireless PG 2-button key PGx949 UL

Wireless PG indoor siren PGx901 UL

Wireless PG outdoor siren PGx911UL

Wireless PG repeater PGx920UL

Wireless PG door/window contact PGx975UL

Wireless PG door/window contact w/AUX PGx945 UL

NOTE: In this chart, x in the model number represents the

operating frequency of the device as follows: 9 (912-919 MHz),

8 (868MHz), 4 (433MHz).

NOTE: Only models operating in the band 912-919 MHz are

UL/ULC or cUL listed where indicated. Only UL approved

devices are to be used with UL/ULC listed systems.

wiring slot

knockout

tamper

mounting holes

latchlatch

Produkt Specifikationer

Mærke:	DSC
Kategori:	Alarmsystem
Model:	HS2ICN

Har du brug for hjælp?

Hvis du har brug for hjælp til DSC HS2ICN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Alarmsystem DSC Manualer

DSC HS2128 Manual

3 August 2024

DSC HS2ICN Manual

30 Juli 2024

DSC PTK5507 Manual

25 Juli 2024

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

Swann SRDVR-164880W Manual

13 August 2025

Swann ALPHS-B400RWPK2-QVC Manual

13 August 2025

Hager S262-22F Manual

9 August 2025

Hager TGA200 Manual

9 August 2025

Smartwares HA701SL-IC Manual

8 August 2025

Smartwares SC37 Manual

8 August 2025

Brennenstuhl WF 2050 Manual

4 August 2025

Blaupunkt E02 Manual

3 August 2025

Abus Terxon SX Manual

2 August 2025

Abus FO400A Manual

2 August 2025