Paper weight 60gsm
Instant Water Boiler
INSTRUCTION MANUAL
Please read carefully before use and keep for future reference
Model No. White - EL6660, Black - EL6661
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6600-1 © 2016 Easylife Group Ltd
everyday solutions
™
Est. 1992
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
everyday solutions
™
Est. 1992
BOILS
WATER IN
SECONDS!
DISPOSAL
• Pleaserespecttheenvironment!
• Disposeofthepackagingaccordingtothelocalrecyclingregulations.
• Disposeoftheapplianceattheendofitslifespanaccordingtoenvironmentalconsiderations.
WARNING
This product is intended for domestic use only.
TECHNICAL SPECIFICATION
Model No: 6660 6661 // Volume: 2.5L // Rated Voltage: AC 220-240V // Frequency: 50/60Hz
RatedPower:2200-2600W//PowerLead:75cm//Measurements:H31xW19xD28cm
CLEANING AND MAINTENANCE
• Always switch off and unplug your water dispenser and allow it to completely cool before cleaning.
• To avoid damage, do not immerse the appliance into any liquid.
• Wipe clean with a soft, damp cloth.
• Wash the water tank in warm, soapy water. Rinse and dry thoroughly before use.
• Donotuseanyabrasivescourersorabrasivecleaningagents.
IMPORTANT DE-SCALE MONTHLY
• De-scaletheunitmonthly,usinganon-toxicdetergentorcitricacid.Addsomedetergentorcitric
acid into the water, operate the unit at least three times to de-scale. Rinse
thoroughlybeforere-using,includingushingthroughthe
reservoir. Remove the rubber stopper plug at the base of the
unit and empty any residue water. Replace rubber stopper plug
securely.
• After cleaning the appliance, please open the drainage stopper
in order to clean up the water waste. Please tighten the drainage
stopper after opening it.
Note: If water leakage is found at the bottom of the appliance,
please tighten the drainage stopper.
STORAGE
If do not use the appliance for a long time, unplug and clean it, then put back into the original
packaging to avoid the electrical components being damaged.
