Ecler eSAM402 Manual

Ecler Blander eSAM402

Læs gratis den danske manual til Ecler eSAM402 (30 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Ecler eSAM402, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/30

USER MANUAL

MANUAL DE INSTRUCCIONES

NOTICE D'UTILISATION

BEDIENUNGSANLEITUNG

Graphic Symbol Explanation

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

The lightning flashes printed next to the OUTPUT terminals of the apparatus are intended

to alert the user to the risk of hazardous energy. Output connectors that could pose a risk

are marked with the lightning flash. Do not touch output terminals while apparatus power

is on. Make all connections with apparatus turned off.

WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience

receptacles, and at the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug the apparatus during lightening sorts or when unused for long periods of time.

13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been

damaged in any way, suck as power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

14. Disconnecting from mains: Switching off the POWER switch all the functions and light indicators

of the device will be stopped, but fully disconnecting the device from mains is done unplugging

the power cord from the mains input socket. For this reason, it always shall remain readily

operable.

Produkt Specifikationer

Mærke:	Ecler
Kategori:	Blander
Model:	eSAM402
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	482.6 mm
Dybde:	120 mm
Højde:	44 mm
Vægt:	1700 g
Produktfarve:	Sort
Equalizer:	Ja
Strømforbrug (typisk):	- W
Frekvensområde:	10 - 55000 Hz
Equalizerbånd, antal:	3
Mikrofonindgang:	Ja
Videofunktion:	Ingen
Mikrofonindgangsimpedans:	1000 ohm (Ω)
Antal kanaler:	4 kanaler
Stativ-montering:	Ja
Output impedans:	600 ohm (Ω)
Indgangsimpedans:	50000 ohm (Ω)
Fantomstrøm:	18 V
Linie indgående (RCA):	4
Digital lydbehandling:	- Bit
DJ mixer:	Ingen
Mikrofon, signal-til-støjforhold:	85 dB
Liniesignal-til-støjforhold (SNR):	110 dB
AUX udgående porte:	1
Tone kontrol:	Ja
Master (L, R) udgang:	1