ECS N7200GS-256DZ Manual
Læs nedenfor 📖 manual på dansk for ECS N7200GS-256DZ (110 sider) i kategorien Videokort. Denne guide var nyttig for 17 personer og blev bedømt med 4.4 stjerner i gennemsnit af 9 brugere
Side 1/110
Copyright
2005 Elitegroup Computer Systems Co., Ltd. All rights Reserved.
©
No part in this manual may be reproduced in any form by any organization and
individual without written consent of Elitegroup Computer Systems Co., Ltd. (ECS).
Trademark Recognition
All the trademarks, signals and logos used in this manual are the properties of
Elitegroup Computer Systems Co., Ltd. The trademarks and logos are authorized by
ECS to use publicly. All other company and product names used in this manual are
the properties of the respective companies and products.
Disclaimer
The information in this document is subject to change without notice.
NVIDIA and “NVIDIA” marks presented on the related products are trademarks
and/or registered trademarks of NVDIA Corporation
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment onto an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with this
equipment to ensure compliance with the pertinent RF emission limits governing this
device. Changes or modifications not expressly approved by the system’s manufacturer
could void the user’s authority to operate the equipment.
Preface
1. Introducing the Product .....................................................................................1
System Requirements........................................................................................1
2. Hardware Installation......................................................................................... 2
2.1. Package Contents.......................................................................................2
2.2. Hardware Installation...............................................................................2
3. Software Installation.............................................................................................3
3.1. Install Motherboard Drive Utility.........................................................3
3.2. Install DirectX..............................................................................................4
3.3. Install the Video Card Driver..................................................................5
3.3.1. Uninstall the Old Drivers..................................................................... ..5
3.3.2. Install the Video Card Driver ...............................................................6
3.3.3. Update the Video Card Driver Program.................................................9
4. Software Setup.....................................................................................................11
4.1. Adjust the Screen Resolution and Color Quality.................................11
4.2. Adjust the Monitor Refresh Rate............................................................ 11
4.3. Information on Video Card......................................................................12
4.4. Screen Adjustment.....................................................................................12
4.5. nView Display Settings...........................................................................13
4.6. Display Mode Timing.............................................................................. 13
4.7. Performance and Quality Settings........................................................14
4.8. Color Correction .....................................................................................14
4.9. Overlay Controls .....................................................................................15
4.10. Tools........................................................................................................15
4.11. NVRotate..................................................................................................16
4.12. Temperature Settings.............................................................................16
4.13. Screen Resolution and Refresh Rate..................................................17
4.14. Desktop Management...........................................................................17
4.15. Screen Menu Editing.............................................................................18
4.16. SLI Multi-GPU........................................................................................18
Multi-Language Translation
TT
TTTABLE OF CONTENTSABLE OF CONTENTS
ABLE OF CONTENTSABLE OF CONTENTSABLE OF CONTENTS
Preface
1
System Requirements
• 800 MHz processor or higher
• At least 128 MB system memory
• AGP or PCI Express slot
• CD-ROM or DVD-ROM drive
• Microsoft Windows 2000/XP/2003/VISTA
• At least 100 MB free HD drive space
1. Introducing the Product
Thank you for choosing this ECS VGA card. We are pleased that you
have selected one of the best-engineered VGA cards with enhanced
functions available today. We recommend that you read through this
User’s manual before installing your video card to ensure that the
installation process goes smoothly.
3
3. Software Installation
Insert the Software and Driver CD into your CD-ROM, the ECS VGA
INSTALLER program will run automatically (If your system does not
come up this program, please run the Install CD.exe in the sub-menu).
3.1. Install Motherboard Drive Utility
Motherboard drive utility should be installed first if you are not using Intel
chipset.
Step 1:
Select <Utility> item in the Main Menu.
Step 2:
In the following window, select the correct chipset category of your
motherboard and then install the driver.
Produkt Specifikationer
| Mærke: | ECS |
| Kategori: | Videokort |
| Model: | N7200GS-256DZ |
Har du brug for hjælp?
Hvis du har brug for hjælp til ECS N7200GS-256DZ stil et spørgsmål nedenfor, og andre brugere vil svare dig
Videokort ECS Manualer
19 August 2024
17 August 2024
15 August 2024
15 August 2024
15 August 2024
15 August 2024
10 August 2024
10 August 2024
8 August 2024
Videokort Manualer
- Videokort Asrock
- Videokort CLUB3D
- Videokort Zotac
- Videokort Iogear
- Videokort AMD
- Videokort HIS
- Videokort MSI
- Videokort Gigabyte
- Videokort PNY
- Videokort Matrox
- Videokort Foxconn
- Videokort Asus
- Videokort Datapath
- Videokort Nvidia
- Videokort StarTech.com
Nyeste Videokort Manualer
30 December 2025
29 December 2024
29 December 2024
28 December 2024
27 December 2024
15 December 2024
13 December 2024
9 December 2024
9 December 2024
9 December 2024