2
Important Safety Information
Electrical Safety
Improper handling can cause serious damage to the EdgeStar ice maker and / or injury to the user. This
ice maker is designed for domestic indoor use only. Do not use the unit for industrial or commercial
use. Any other use may invalidate the warranty. Please review the ratings label located on the rear
panel of the unit for electrical and other technical data related to this unit. The unit must be used in a
properly grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of re, electric
shock, or injury.
• Do not exceed the power outlet ratings.
• It is recommended the ice maker be connected on its own circuit.
• The unit must be installed in accordance with state and local electrical codes.
• A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.
• Use outlets that cannot be turned o by a switch or pull chain.
• Always turn the unit o and unplug it from the outlet when cleaning.
• Unplug the unit if it is not going to be used for an extended period of time.
• Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose
socket.
• Be sure the ice maker is properly grounded.
• Never plug or unplug the unit with wet hands.
• Do not bypass, cut, or remove the grounding plug.
• Do not use extension cords or power strips with this unit. You may need to contact your electrician
if it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the
power cord’s length or share the outlet with other appliances.
• Do not start or stop the unit by switching the circuit’s power on and o.
• If the power cord is damaged, it must be replaced by the manufacturer or a qualied technician.
• Never repair the unit while it is plugged in.
• Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and
contact customer service.
• Do not remove any part of the casing unless you are instructed to do so by an authorized
technician.
• You should never attempt to repair the unit yourself.
• Contact customer service for service options if the unit needs service.
