Edifier ES60 Manual

Edifier Højttaler ES60

Læs gratis den danske manual til Edifier ES60 (7 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 81 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 41 anmeldelser. Har du et spørgsmål om Edifier ES60, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

2. What’s in the box?

Note:

•Images are for illustrative purpose only and may dier from the actual product.

•For the need of technical improvement and system upgrade, information and

specications contained herein may be slightly dierent from actual product. If

any dierence is found, the actual product prevails.

7. Bluetooth stereo pairing

4. Power on/o

9. Play control

8. USB connection

10. Phone calls

11. Light eects

12. Specications

13. Troubleshooting

Total output power (RMS): 8 W + 8 W + 18 W

Frequency response: 58 Hz~20 kHz

Declaration for EU

Frequency Band: 2.402 GHz ~ 2.480 GHz

RF Power Output: ≤10 dBm (EIRP)

There is no restriction of use.

Quick start guide Important safety instructions

StrapUSB-C to USB-C audio cable

Speaker

Manual

Cannot connect to your Bluetooth device

•Make sure that the distance between this product and your Bluetooth device

is less than 10 meters and there are no obstacles between them.

•Make sure that no device is connected to this product via Bluetooth.

•Make sure that this product is in Bluetooth pairing mode. If not, manually

switch it to this mode.

•Resta this product, enable Bluetooth function on your Bluetooth device,

and then t again.

•Reset this product to facto settings and t again.

No power

•Make sure that the power cable is properly connected.

•Make sure that the power supply is not disconnected.

No sound

•Make sure that this product and your device is properly connected.

•Make sure that the correct audio input source is selected.

•Make sure that the playback is not paused.

•Increase the volume of this product and your device.

Noise coming from speakers

•EDIFIER speakers generate little noise, while the background noise of some

audio devices are too high. Please unplug audio cables and turn the volume

up. If no sound can be heard at 1 meter away from the speaker, there is no

problem with this product.

To learn more about EDIFIER, please visit www.edier.com

For EDIFIER warranty queries, please visit the relevant count page on

www.edier.com and review the section titled Warranty Terms.

USA and Canada: seice@edier.ca

South America: Please visit www.edier.com (English) or

www.edierla.com (Spanish/Pouguese) for local contact information.

With this app, you can

•control play from the Bluetooth

source device,

•control the master volume,

•select sound eects or customize EQs,

•upgrade the rmware, and

•more functions.

Download EDIFIER ConneX app

1. With your sma device, scan the QR code on the quick sta guide or the

packaging.

•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or

Google Play (Android devices).

2. Download and install the app.

How to use this app

1. Connect your sma device with the speaker via Bluetooth.

2. In Bluetooth mode, open EDIFIER ConneX App on your sma device.

3. Tap the menu for settings and playback control.

EDIFIER ConneX app

3. Charging

Note:

•Power input: 5 V 2 A

•"8" is the minimum power required by the radio equipment to charge.

"10" is the maximum power required by the radio equipment to achieve

maximum charging speed.

Note:

1. The following operating systems suppo USB audio streaming: Windows 11,

Windows 10, Windows 8, and Windows 7.

2. In USB audio streaming mode, volume sync is not suppoed. To adjust the

volume, adjust on the speaker and your device separately.

Press and hold the " " button for 1.5 seconds to power on/o the speaker.

1. EDIFIER ConneX mobile app

This speaker suppos the simultaneous connection of two Bluetooth devices.

Connect to a device

1. Press the " " button to switch to Bluetooth input mode. If no device is

connected, the speaker will auto-enter Bluetooth pairing mode (LED blinking

in blue). If not, press and hold the " " button for 1.5 seconds.

2. On your device, select "EDIFIER ES60" in its Bluetooth device list to connect,

and the blue LED will be steady lit when the connection is established.

•To disconnect from the current Bluetooth device, press and hold the " "

button for 1.5 seconds.

Connect to two devices

1. Connect to a device, and then press and hold the " " button for 1.5 seconds

(LED blinking in blue).

2. On the second device, select "EDIFIER ES60" in its Bluetooth device list to

connect, and the blue LED will be steady lit when the connection is established.

3. On the rst device, select "EDIFIER ES60" in its Bluetooth device list to reconnect.

•Pause or stop playback on the current Bluetooth device before streaming audio

from the second one.

Note:

•Pin code for connection is "0000" if needed.

•To enjoy all Bluetooth functions of this product, make sure that your audio

source device suppos HFP, A2DP and AVRCP proles.

•If no device is connected in 10 minutes, the speaker will switch to Bluetooth

hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices

cannot nd the speaker, but (2) for a device that exists in the pairing record of

this speaker, you can select "EDIFIER ES60" from its Bluetooth device list to

reconnect. To exit from Bluetooth hidden mode, press " " button on the

speaker.

•After switched to Bluetooth input, the speaker will reconnect to the last

connected devices automatically.

Pair two ES60 speakers to enjoy stereo sound.

1. Double press the " " button on the rst ES60. The white LED will be in

breathing pattern.

2. Double press the " " button on the second ES60. The white LED will be in

breathing pattern.

•Once the connection is established, the white LED on the rst ES60 will be

steady lit or blink rapidly, and the white LED on the second ES60 will light o.

3. Connect the rst ES60 to your Bluetooth device and sta playing.

•To exit the stereo mode, double press the " " button.

Note:

•The rst ES60 will work as the master speaker. You can control play on the rst

ES60.

•The rst ES60 will deliver the right channel audio and the second one is for the

left channel audio.

5. Source selection

6. Bluetooth connection

Poable Bluetooth Speaker

ES60

5V 2A

8-10

OFFON

1.5s

USB

Bluetooth stereo pairing

White

Input

Indicator Blue Red

USB

Bluetooth

Settings

EDIFIER ES60

DEVICES

Bluetooth

2:12

Bluetooth

Settings

EDIFIER ES60

DEVICES

Bluetooth

2:12

x2 x2

① ②

EDIFIER ES60

x1 ： x2 ：：

Produkt Specifikationer

Mærke:	Edifier
Kategori:	Højttaler
Model:	ES60

Har du brug for hjælp?

Hvis du har brug for hjælp til Edifier ES60 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Edifier Manualer

Edifier G2000 PRO Manual

17 September 2025

20 August 2025

20 August 2025

20 August 2025

11 August 2025

10 August 2025

Edifier S3000MKII Manual

10 August 2025

Edifier G7000 Manual

10 August 2025

Edifier Luna HD Eclipse e25HD Manual

26 Juni 2025

Edifier R1580MB Manual

22 Juni 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Digital Watchdog SiteWatch DWC-SWSPW30iAM Manual

17 December 2025

Artsound AS1600 Manual

17 December 2025

Digital Watchdog SiteWatch DW-SWSPC30iAM Manual

16 December 2025

PSB SubSeries BP7 Manual

16 December 2025

Energy Sistem TempoRave Manual

11 December 2025

RCF C 5215-W MKIII Manual

10 December 2025

RCF X 28 L Manual

10 December 2025

Fostex PM0.4d Manual

8 December 2025

Amphion Argon 3LX Manual

8 December 2025

Amphion Argon 7LX Manual

8 December 2025