Edifier QS20 Manual

Edifier Højttaler QS20

Læs gratis den danske manual til Edifier QS20 (7 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Edifier QS20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

2. What’s in the box?

Note:

•Images are for illustrative purpose only and may dier from the actual product.

•For the need of technical improvement and system upgrade, information and

specications contained herein may be slightly dierent from actual product. If

any dierence is found, the actual product prevails.

6. Bluetooth stereo pairing

4. Power on/o

7. Play control

8. Phone calls

9. Light eects

10. Specications

11. Troubleshooting

Quick start guide Important safety instructions

StrapUSB-C to USB-C audio cable

Cleaning cloth

Speaker

Manual

Cannot connect to your Bluetooth device

•Make sure that the distance between this product and your Bluetooth device

is less than 10 meters and there are no obstacles between them.

•Make sure that no device is connected to this product via Bluetooth.

•Make sure that this product is in Bluetooth pairing mode. If not, manually

switch it to this mode.

•Resta this product, enable Bluetooth function on your Bluetooth device,

and then t again.

•Reset this product to facto settings and t again.

No sound

•Make sure that this product and your device is properly connected.

•Make sure that the correct audio input source is selected.

•Make sure that the playback is not paused.

•Increase the volume of this product and your device.

Noise coming from speakers

•EDIFIER speakers generate little noise, while the background noise of some

audio devices is too high. Please unplug audio cables and turn the volume

up. If no sound can be heard at 1 meter away from the speaker, there is no

problem with this product.

To learn more about EDIFIER, please visit www.edier.com

For EDIFIER warranty queries, please visit the relevant count page on

www.edier.com and review the section titled Warranty Terms.

USA and Canada: seice@edier.ca

South America: Please visit www.edier.com (English) or

www.edierla.com (Spanish/Pouguese) for local contact information.

With this app, you can

•Control play from the Bluetooth

source device,

•Control the master volume,

•Switch EQs,

•Select or customize light eects,

•Upgrade the rmware, and

•More functions.

Download EDIFIER ConneX app

1. With your sma device, scan the QR code on the quick sta guide or the

packaging.

•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or

Google Play (Android devices).

2. Download and install the app.

How to use this app

1. Connect your sma device with the speaker via Bluetooth.

2. In Bluetooth mode, open EDIFIER ConneX App on your sma device.

3. Tap the menu for settings and playback control.

EDIFIER ConneX app

3. Charging

Note:

•Power input: 5 V 2 A

•"7" is the minimum power required by the radio equipment to charge.

"9" is the maximum power required by the radio equipment to achieve

maximum charging speed.

1. EDIFIER ConneX mobile app

5. Bluetooth connection

Poable Bluetooth Speaker

QS20

7-9

Bluetooth

Settings

EDIFIER QS20

DEVICES

Bluetooth

2:12

5V 2A

OFFON

1.5s

When the speaker is not under charging, it will automatically power o if there

are no audio playback and operation for 30 minutes.

This function is enabled by default. You can disable it in the menu of "Settings" →

"Power saving mode" on EDIFIER ConneX App.

Bluetooth

Settings

EDIFIER QS20

DEVICES

Bluetooth

2:12

This speaker suppos the simultaneous connection of two Bluetooth devices.

Connect to a device

1. If no device is connected, the speaker will auto-enter Bluetooth pairing mode

after powered on (LED blinking in blue). If not, press and hold the "+" and "-"

buttons for 1.5 seconds.

2. On your device, select "EDIFIER QS20" in its Bluetooth device list to connect,

and the blue LED will be steady lit when the connection is established.

•To disconnect from the current Bluetooth device, press and hold the "+" and "-"

buttons for 1.5 seconds.

Connect to two devices

1. Connect to a device, and then press and hold the "+" and "-" buttons for 1.5

seconds (LED blinking in blue).

2. On the second device, select "EDIFIER QS20" in its Bluetooth device list to

connect, and the blue LED will be steady lit when the connection is established.

3. On the rst device, select "EDIFIER QS20" in its Bluetooth device list to reconnect.

•Pause or stop playback on the current Bluetooth device before streaming audio

from the second one.

Note:

•Pin code for connection is "0000" if needed.

•To enjoy all Bluetooth functions of this product, make sure that your audio

source device suppos HFP, A2DP and AVRCP proles.

•If no device is connected in 10 minutes, the speaker will switch to Bluetooth

hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices

cannot nd the speaker, but (2) for a device that exists in the pairing record of

this speaker, you can select "EDIFIER QS20" from its Bluetooth device list to

reconnect. To exit from Bluetooth hidden mode, press " " button on the

speaker.

•After powered on, the speaker will reconnect to the last connected devices

automatically.

Pair two QS20 speakers to enjoy stereo sound.

1. Double press the " " button on the rst QS20. The white LED will be in

breathing pattern.

2. Double press the " " button on the second QS20. The white LED will be in

breathing pattern.

• Once the connection is established, the blue LED on the rst QS20 will be

steady lit or blink fast, and the white LED on the second QS20 will light o.

3. Connect the rst QS20 to your Bluetooth device and sta playing.

• To exit the stereo mode, double press the " " button.

Note:

• The rst QS20 will work as the master speaker. You can control play on the rst

QS20.

• The rst QS20 will deliver the right channel audio and the second one is for the

left channel audio.

①

②

①

②

x1 ：

x2 ：

：

Declaration for EU

Frequency Band: 2.402 GHz ~ 2.480 GHz

RF Power Output: ≤13 dBm (EIRP)

There is no restriction of use.

Total output power (RMS): 6 W

Frequency response: 87 Hz~20 kHz

Produkt Specifikationer

Mærke:	Edifier
Kategori:	Højttaler
Model:	QS20

Har du brug for hjælp?

Hvis du har brug for hjælp til Edifier QS20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Edifier Manualer

Edifier G2000 PRO Manual

17 September 2025

20 August 2025

20 August 2025

20 August 2025

11 August 2025

10 August 2025

Edifier S3000MKII Manual

10 August 2025

Edifier G7000 Manual

10 August 2025

Edifier Luna HD Eclipse e25HD Manual

26 Juni 2025

Edifier R1580MB Manual

22 Juni 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Altec Lansing inMotion iM4 Manual

24 Oktober 2025

Vonyx VX822 Manual

21 Oktober 2025

Memphis Audio SRX42 Manual

19 Oktober 2025

Memphis Audio MS62 Manual

19 Oktober 2025

Madison MAD-CENTER120 Manual

19 Oktober 2025

Goji Mini GMINIG17 Manual

19 Oktober 2025

Audison VOCE AV 12 Manual

19 Oktober 2025

Memphis Audio VIV60CV2 Manual

18 Oktober 2025

Klipsch Reference Premiere RP-400C Manual

18 Oktober 2025

Klipsch KF-28 Manual

18 Oktober 2025