Edifier X2s Manual


Læs gratis den danske manual til Edifier X2s (7 sider) i kategorien Øreprop. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Edifier X2s, eller vil du spørge andre brugere om produktet?

Side 1/7
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Left & Right connection
6. Controls
True Wireless Earbuds Headphones
X 2 s
Manual
1. Taken out of the case.
2. Disconnected from any Bluetooth device. Press and hold the touch
panel on either earbud for around 8s until blue LED blinks 6 times
to clear the Bluetooth pairing records and power o. If the left and
right earbuds are connected, the other side will clear the
Bluetooth pairing record and power o too.
3. Placed back in the case and taken out of the case again.
4. Select "EDIFIER X2s" in your Bluetooth device setting to connect.
White LED will blink twice in 5 seconds when successfully.
1. When earbuds are powered on and there is no Bluetooth connection
and TWS connection, respectively tap the touch panel 5 times on
both earbuds until white LED blinks slowly to enter TWS pairing
mode. Once the left and right earbuds are connected successfully,
white and blue LEDs will blink alternately to enter Bluetooth
pairing mode.
2. Select "EDIFIER X2s" in your Bluetooth device setting to connect.
White LED will blink twice in 5 seconds when successfully.
1st Pairing
1. Taken out of the case. White and blue LEDs will blink alternately.
2. Select "EDIFIER X2s" in your Bluetooth device setting to connect.
White LED will blink twice in 5 seconds when successfully.
Note:
For subsequent use, the earbuds will automatically connect to the
device used last time.
Note:
1. Images are for illustrative purposes only and may dier from the
actual product.
2. Download Edier Connect App for more customizable control
settings.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200123
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
Note:
If there is no Bluetooth connection for 10 minutes after powered on,
the earbuds will power o automatically.
White LED lit for 1s
Indica dicator
8s 8s
Indicator
Left Touch Pan Right Touch Panel
Earbuds
1. When hearing a low batte prompt tone, please
place the earbuds in the case for charging.
2. White LED on earbud is steady lit when charging
and o when fully charged.
Charging Case
1. Please connect the case to power source with
the included Type-C charging cable for charging.
2. White LED is steady lit when charging and o
when fully charged.
Note:
Please do not charge the earbuds when there is
sweat or other liquids inside the charging po,
which may damage the earbuds.
Input: 5V 200mA(Earbuds)
5V 1A(Charging case)
Indica dicator
x5 x5
Indica dicator
5. Charging
x2x2
x2x2
x3x3
2s2s
2s2s
x2x2
FR 1. Allumer/Éteindre
Pour plus d'informations, consultez notre site web:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Modèle: EDF200123
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. Tous droits réseés.
Imprimé en China
AVIS:
Pour les besoins du progrès technique et la mise à niveau du système,
les informations contenues dans ce document peuvent être sujets à
changements à tout moment sans préavis.
Les produits d'EDIFIER seront modiés pour ceaines applications.
Les photos, illustrations et spécications montrées ici peuvent être
légèrement diérentes du produit réel. Si aucune diérence n'est
trouvée, le produit réel prévaut.
2. Appairage
3. Réinitialiser
4. Connexion à gauche et à droite
6. Commandes
1. Sois de l'étui.
2. Déconnectez de tout appareil Bluetooth. Maintenezla zone tactile
de l’un des écouteurs enfoncée pendant environ 8 s et attendez
que la LED bleue clignote 6 fois pour eacer l’enregistrement
d’association Bluetooth et éteindre. Si les écouteurs de droite et
de gauche sont connectés, l’autre côté eacera l’enregistrement
d’association Bluetooth et séteindra.
3. Placez les écouteurs dans l'étui et soez-les à nouveau de l'étui.
4. Sélectionnez « EDIFIER X2s » dans les paramètres de votre appareil
pour vous connecter. La LED blanche clignotera deux fois en 5 s
lorsque l'opération est réussie.
1. Lorsque les écouteurs sont allumés et qu'il n'y a aucune connexion
Bluetooth et TWS, touchez respectivement la zone tactile des deux
écouteurs 5 fois jusqu'à ce que la LED blanche clignote lentement
pour passer en mode d'association TWS. Une fois les deux
écouteurs correctement connectés, les LED blanche et bleue
clignoteront alternativement pour passer en mode d'association
Bluetooth.
2. Sélectionnez « EDIFIER X2s » dans les paramètres de votre appareil
pour vous connecter. La LED blanche clignotera deux fois en 5 s
lorsque l'opération est réussie.
1ère Appairage
1. Sois de l'étui. Les LED blanche et bleue clignoteront
alternativement.
2. Sélectionnez « EDIFIER X2s » dans les paramètres de votre
appareil pour vous connecter. La LED blanche clignotera deux
fois en 5 s lorsque l'opération est réussie.
Remarque:
Les écouteurs se connecteront automatiquement au dernier
appareil associé lorsque vous les allumerez dans le futur.
Remarque:
1. Les images utilisées seent de référence uniquement, et peuvent
ne pas correspondre au produit.
2. Téléchargez l'appli «Edier Connect» pour des réglages de contrôle
plus personnalisables.
1. S'allument quand sois de l'étui.
2. S'éteignent quand placés dans l'étui.
Remarque:
Si aucune connexion Bluetooth n'est eectuée pendant 10 minutes
après la mise sous tension, les écouteurs s'éteignent automatiquement.
La LED blanche s'éclaire pend
Indica dicateur
8 s 8 s
Zone Tactile Gau one Tactile Droite
Écouteurs
1. Lorsque la tonalité de notication de niveau de
batterie faible retentit, veuillez placer les écouteurs
dans l'étui pour les charger.
2. La LED blanche de l'écouteur s'illumine en continu
pendant la charge et s'éteint lorsque la batterie
est pleine.
Étui-chargeur
1. Veuillez connecter l'étui-chargeur à une source
d'alimentation avec le câble de charge type-C
inclus pour la charge.
2. La LED blanche s'illumine en continu pendant la
charge et s'éteint lorsque la batterie est pleine.
Remarque :
Veuillez ne pas charger les écouteurs si de la sueur
ou autres liquides sont présents dans le po de
charge, ce qui peut endommager les écouteurs.
Entrée: 5V 200mA(Écouteurs)
5V 1A(Étui-chargeur)
Indica
Indica
Indicateur
dicateur
x5 x5
dicateur
5. Charger
x2x2
x2x2
x3x3
2s2s
2s2s
x2x2


Produkt Specifikationer

Mærke: Edifier
Kategori: Øreprop
Model: X2s

Har du brug for hjælp?

Hvis du har brug for hjælp til Edifier X2s stil et spørgsmål nedenfor, og andre brugere vil svare dig




Øreprop Edifier Manualer

Edifier

Edifier TWS NB2 Manual

31 December 2025
Edifier

Edifier X6 Manual

31 December 2025
Edifier

Edifier Comfo C Manual

4 December 2024
Edifier

Edifier X1 Lite Manual

4 December 2024
Edifier

Edifier NeoBuds Plus Manual

4 December 2024
Edifier

Edifier P180 USB-C Manual

23 September 2024
Edifier

Edifier W280NB Manual

19 September 2024
Edifier

Edifier W260NC Manual

1 September 2024
Edifier

Edifier X5 Pro Manual

1 September 2024
Edifier

Edifier X5 Lite Manual

28 August 2024

Øreprop Manualer

Nyeste Øreprop Manualer