Eizo EX4 Manual

Eizo Ikke kategoriseret EX4

Læs gratis den danske manual til Eizo EX4 (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Eizo EX4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
English
Please read this User’s Manual carefully to familiarize yourself with safe and e󰀨ective usage.
Please retain this manual for future reference.
PRECAUTIONS
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange noises,
disconnect all connections immediately and contact your local EIZO representative for advice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Do not disassemble or modify the unit and cable.
Not doing so may result in damage, re or electric shock.
Package Contents
Please contact your local EIZO representative for assistance if any of the listed items are missing
or damaged.
• EX4 (sensor)
• User’s Manual (This manual)
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any
form or by any means, electronic, mechanical, or otherwise, without the prior written permission
of EIZO Corporation. EIZO Corporation is under no obligation to hold any submitted material or
information condential unless prior arrangements are made pursuant to EIZO Corporation’s
receipt of said information. Although every e󰀨ort has been made to ensure that this manual
provides up-to-date information, please note that this products specications are subject to
change without notice.
EIZO and EIZO Logo are registered trademarks of EIZO Corporation in Japan and other countries.
ColorNavigator is a trademark of EIZO Corporation.
All other company and product names are trademarks or registered trademarks of their respective owners.
User’s Manual
Calibration Sensor
1
Installing the software
This sensor is for the calibration of monitors in the ColorEdge series using color management
software “ColorNavigator 7”. ColorNavigator 7 software needs to be installed to enable use of
EX4. For more information about how to install, see ColorNavigator 7 Installation Guide.
How to attach the EX4
Attention
• Before attaching the EX4, remove the stains or dusts on the surface of the monitor.
1.
Connect the monitor and the PC with the USB cable supplied with
your monitor.
For more information about how to connect, see the Setup Guide for the monitor.
2.
Remove the cap (counterweight) from the sensor.
Sensor
Counterweight
3.
Connect the EX4 to the USB downstream port of either the PC or the
monitor.
2

Produkt Specifikationer

Mærke: Eizo
Kategori: Ikke kategoriseret
Model: EX4

Har du brug for hjælp?

Hvis du har brug for hjælp til Eizo EX4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Eizo Manualer

Eizo

Eizo FlexScan EV2780 Manual

14 August 2024
Eizo

Eizo EX4 Manual

7 August 2024
Eizo

Eizo VOP-01 Manual

6 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet

Planet XGPN-100 Manual

15 Juni 2025
Proficook

Proficook PC-EKA 1283 Manual

15 Juni 2025
OmniMount

OmniMount OBSP8 Manual

15 Juni 2025
Levenhuk

Levenhuk FS10 Manual

15 Juni 2025
Vestil

Vestil PM4-2148-LP Manual

15 Juni 2025
ElectriQ

ElectriQ STRV-W1-B Manual

15 Juni 2025
Adler

Adler AD 4521 Manual

15 Juni 2025
AMX

AMX HydraPort HPX-AV102 Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025