Electro Harmonix EHX-202 Manual

Electro Harmonix Audio tuner EHX-202

Læs gratis den danske manual til Electro Harmonix EHX-202 (2 sider) i kategorien Audio tuner. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Electro Harmonix EHX-202, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

EHX-2020 Chromatic Tuner Pedal

PRECAUTIONS

To avoid short circuit, electrical shock or malfunction:

•Do not disassemble for repair

•Do not place in high temperature and humid spaces, such as an electric heater, direct sunlight,

bathroom, wet floor, etc.

•Do not place in an area with excessive vibration

•Do no place in dusty or dirty space

•Do not operate with wet hands

To avoid breakdown:

•Do not handle the controls with excessive force

•Do not drop the tuner

Cleaning:

•Do not use paint thinner or alcohol for cleaning

•Use only dry and clean cloth

WELCOME

Congratulations on your purchase of the Electro-Harmonix EHX-2020 Chromatic Tuner Pedal, a

convenient and complete solution to tuning your instrument.

FEATURES & FUNCTIONS

1) Foot Switch: Pressing the Foot Switch will turn the tuner on/off.

2) Input Jack: Connect the cable from your instrument to the Input Jack of the tuner. When

powering the tuner from a battery, the Input Jack also functions as a power switch. Battery

power is engaged when a plug is inserted into the Input Jack. Power shuts off when the plug

is pulled out of the Input Jack. We recommend you remove the plug from the Input Jack

when you finish playing music.

3) DC 9V In Jack: If a DC adapter is used, you will be able to play without worrying about battery

life. The DC 9V Jack requires a power plug with dimensions of 5.5 x 2.1 (mm) and center-

negative polarity. The current draw at the DC 9V jack is xxmA.

4) Output Jack: Connect your amp or another effect unit to the Output Jack. When the tuner is

off, the Output Jack will output the signal of the instrument connected to the Input Jack.

When the tuner is on, no sound will be output from the Output Jack so you can tune silently.

5) Pitch Button: This button lets you change the reference frequency. 7-segment indication of 0

to 5 means 440-445Hz, and an indication of 6 to 9 means -439Hz.436

6) Flat Button: This button lets you use flat tunings.

Normal Tuning: Detuned ½ Note: Detuned 1 Full Note: Detuned 1 ½ Notes:

PROCEDURE

www.ehx.com

WARRANTY & NOTICES

Warranty Information

Please register online at http://www.ehx.com/product-registrati on.

Electro-Harmonix will repair or replace, at its discretion, a product

that fails to operate due to defects in materials or workmanship for

a period of one year from date of purchase. This applies only to

original purchasers who have bought their product from an

authorized Electro-Harmonix r etailer. Repaired or replaced units will

then be warranted for the unexpired portion of the original

warranty term. If you should need to return your unit for service

within the warranty period, please contact the appropriate office

listed below. Customers outside the regions listed below, please

contact EHX Customer Service for information on warranty repairs

at info@ehx.com or +1- - -8300. USA and Canadian 718 937

customers: please obtain a Return Authorization Number (RA#)

from EHX Customer Service before returning your product. Include,

with your returned unit, a written description of the problem as well

as your name, address, telephone number, e-mail address, RA# and

a copy of your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE

ELECTRO-HARMONIX c/o NEW SENSOR CORP.

47-50 33RD STREET LONG ISLAND CITY, NY 11101

Tel: 718- -937 8300

Email: info@ehx.com

Europe

JOHN WILLIAMS

ELECTRO-HARMONIX UK

13 CWMDONKIN TERRACE

SWANSEA SA2 0RQ UNITED KINGDOM

Tel: +44 179 247 3258

Email: electroharmonixuk@virginmedia.com

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to r adio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and r eceiver.

• Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for

help.

Modifications not expressly approved by the manufacturer could

void the user's authority to operate the equipment under FCC r ules.

The CE logo indicates that this product has been tested and shown

to conform with all applicable European Conformity directives.

Disposal: This symbol indicates that this product shall not be

treated as household waste. Instead it shall be disposed in

accordance with local environmental laws and guidelines and,

where as appropriate, handed over to the applicable coll ection

point for the recycling of electrical and electronic equipment. This

product was produced after Jan 1 2006.

1. Connect output of the instrument to the Input Jack of the tuner. The power will be turned on.

2. Press the Foot Switch to turn the tuner on.

3. Press the Pitch Button to select the reference frequency you want to use.

4. Press the Flat Button to select the reference flat you want to use.

5. Adjust the instrument until the tuning note you wished to tune is indicated.

6. Adjust the instrument slowly until the tuning guide reaches the center position.

7. When the center of the tuning guide lights up, the instrument is in tune.

SPECIFICATIONS

•True Bypass

•Tuning Range: B0-B7

•Accuracy: +/- 1cent

•Calibration: 436-445Hz (1 Hz step)

•Input: 1/4" Input Jack

•Output: 1/4" Output Jack

•Power: 9V DC Adapter

•Dimensions (mm): 46 x 94 x 50

•Weight: 260g

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Audio tuner
Model:	EHX-202

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix EHX-202 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Audio tuner Electro Harmonix Manualer

Electro Harmonix EHX-202 Manual

1 Januar 2025

Audio tuner Manualer

Nyeste Audio tuner Manualer

13 September 2025

11 September 2025

21 August 2025

10 August 2025

9 August 2025

6 August 2025

5 August 2025

4 August 2025

29 Marts 2025

Marantz ST-520 Manual

15 September 2024