Electro Harmonix MIG-50 MKII Manual

Electro Harmonix Guitar forstærker MIG-50 MKII

Læs gratis den danske manual til Electro Harmonix MIG-50 MKII (6 sider) i kategorien Guitar forstærker. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Electro Harmonix MIG-50 MKII, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

MIG-50

50W All Tube Guitar Amplifier

Congratulations on your purchase of the Electro-Harmonix MIG-50, an all tube, two

channel, 50W guitar amplifier head. The EHX MIG-50 is a faithful reissue of the

Sovtek MIG-50 with modern enhancements to both the electronics and mechnical

design. The MIG-50 comes installed with three 12AX7 preamp tubes and two 5881

power tubes.

IMPORTANT SAFETY INSTRUCTIONS

 Read these instructions.

 Keep these instructions.

 Heed all warnings.

 Follow all instructions.

 Clean only with a dry cloth.

 Do not block any ventilation openings.

 Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding-type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your

outlet consult an electrician for replacement of the obsolete outlet.

 Protect the power cord from being walked on or pinched.

 Unplug this amplifier during lightning storms or when unused for long periods of

time.

 WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

 Do not expose this apparatus to dripping or splashing and ensure that no object

filled with liquids is placed on the equipment.

 Maintain at least six inches of unobstructed air space behind the unit to allow for

proper ventilation and cooling. Air must be capable of freely moving around the

amplifier.

 This amplifier is capable of producing very high sound pressure levels which may

cause temporary or permanent hearing damage. Use care when adjusting volume

levels during use.

 Do not turn the amplifier on without a loudspeaker.

 Refer all servicing and maintenance to qualified service personnel including

replacement of fuses and vacuum tubes. Changes and modifications not expressly

approved by EHX can void the warranty.

 DO NOT attempt to remove the amplifier chassis. There are no serviceable parts.

 DO NOT use this apparatus near water.

 Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

 The ventilation should not be impeded by covering the ventilation openings with

items, such as newspapers, tablecloths, curtains, etc.

 No naked flame sources, such as lighted candles, should be placed on the

apparatus.

 Apparatus is not for use in tropical climates.

 Only use attachments/accessories specified by the manufacturer.

 The appliance coupler shall remain readily operable.



The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instructions in the literature accompanying

the product.

GETTING STARTED

BEFORE PLUGGING POWER INTO YOUR MIG-50 AMP MAKE SURE:

1. Both the POWER and STANDBY toggle switches are off, set to their DOWN

position.

2. The AC voltage marked on the rear panel matches the wall voltage for your

region or the AC voltage powering your amp.

3. The LOUDSPEAKERS output on the rear panel should be connected via a properly

rated speaker cable to a speaker cabinet with the correct impedance (a 16Ω

cabinet to the 16Ω jack or an 8Ω cabinet to the 8Ω jack, etc.). WARNING: Only

connect one speaker output at a time! Running the amp into a speaker cabinet

with mismatched impedances or with no cabinet at all could severely damage the

MIG-50 and void your warranty. Be sure to select a cabinet that can handle the

full rated 50W

RMS

power rating for your amp.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Guitar forstærker
Model:	MIG-50 MKII

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix MIG-50 MKII stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Guitar forstærker Electro Harmonix Manualer

Electro Harmonix MIG-50 MKII Manual

8 August 2024

Electro Harmonix Nano Battalion Manual

8 August 2024

Electro Harmonix Dirt Road Special Manual

8 August 2024

Guitar forstærker Manualer

Nyeste Guitar forstærker Manualer

Boss KATANA ARTIST GEN 3 Manual

15 Februar 2025

Blackstar HT-5RH MK III Manual

7 Februar 2025

VOX Brian May MV50 Manual

7 Februar 2025

NUX Mighty Plug Pro MP-3 Manual

1 Februar 2025

Marshall JVM410H Manual

11 Januar 2025

Blackstar CabRig Manual

9 Januar 2025

Blackstar ID:CORE Stereo 10 V4 Manual

9 Januar 2025

Boss KATANA-MINI X Manual

8 Januar 2025

Hartke HD50 Manual

29 December 2024

Mooer Envelope Manual

29 December 2024