Eliminator Lighting EX-4 Manual

Eliminator Lighting Ikke kategoriseret EX-4

Læs gratis den danske manual til Eliminator Lighting EX-4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Eliminator Lighting EX-4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

EX-4

SPECIFICATIONS:

Model: EX-4

Weight: 6 lbs./2.8Kgs.

Size: 19”H x 9”W x 10”L

Lamp: LL FCR 12V 100W

Fuse: 3A

Supply Voltage: 120V

Working Position: Any Safe position

Colors: Multiple Colors

Duty Cycle: 15min on/off

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Lamp Replacement: Remove the two

thumb screws located on the bottom of

the unit. Gently, remove the lamp access

trap door to access the lamp. Remove and

replace the bad lamp and reassemble in

reverse order.

HALOGEN LAMP WARNING!

This fixture is fitted with halogen

lamps which are highly susceptible

to damage if improperly handled.

Never touch lamp with bare fingers

as the oil from your hands will short

en lamp life. Also, never move fixture

until lamp has had ample time to

cool. Remember, lamps are not cov

ered under warranty conditions.

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com

Caution! Never open unit when in use.

Always disconnect main power before

serving or replacing lamp. Remember to

always replace with the exact same type

lamp and fuse.

Operating Instructions:

The unit is ready to be hung

or set on flat surface. This fixture is designed to oper

ate as a stand alone unit. It has been tested and the

lamp has been installed at the factory there is no

assembly necessary. The EX-4 has three different

operating modes. For best results, we suggest using

fog or special effects smoke when using this unit.

This will enhance the effect allowing you to see the

beams of light.

This unit comes with a 3-way multi-operating switch

located on the rear of the unit.

The switch controls

three (3) different operating modes; Static, Sound

Active, and Continuous Rotation. When the switch

is in the "I" position the internal dichroic dish spin

continuously and the mirror will react to sound, via

its internal microphone. When the unit is in the "0"

position the internal dichroic dish is static (does not

rotate) and the mirror will react to sound. When the

switch is in the "II" position the unit's internal dichroic

color wheel and mirror will react to sound.

Produkt Specifikationer

Mærke:	Eliminator Lighting
Kategori:	Ikke kategoriseret
Model:	EX-4

Har du brug for hjælp?

Hvis du har brug for hjælp til Eliminator Lighting EX-4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Eliminator Lighting Manualer

Eliminator Lighting Faze Stream 700 Manual

10 November 2025

Eliminator Lighting EF 400 Manual

9 November 2025

Eliminator Lighting E 106 Manual

7 November 2025

Eliminator Lighting Electro 64 BLED Manual

4 November 2025

Eliminator Lighting E 108 Manual

1 November 2025

Eliminator Lighting EUV 10 Manual

1 November 2025

Eliminator Lighting EX-6 Manual

31 Oktober 2025

Eliminator Lighting E 103 Manual

31 Oktober 2025

Eliminator Lighting LED Cloud Manual

30 Oktober 2025

Eliminator Lighting E 107 Manual

30 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Growatt MIN2.5-6KTL-XH2 Manual

15 December 2025

Bosch SBH6YCX02F Manual

15 December 2025

Eurosound HDBT-BYOD-EX1-P Manual

15 December 2025

Milwaukee MX Fuel MXF002 Manual

15 December 2025

JET JCT-3620A Manual

15 December 2025

California Faucets K30-102SQ Manual

15 December 2025

Tefal Aromati-Q 3-in-1 BG9108 Manual

15 December 2025

Godrej Vigiguard Tripod Manual

15 December 2025

Gladiator GAWB04HWJW Manual

15 December 2025

Kathrein UFO 110/4 Manual

15 December 2025